TOUGH-FLAC 기법을 이용한 점열원 주변지반의 복합거동에 대한 벤치마크 수치모사
Benchmark Numerical Simulation on the Coupled Behavior of the Ground around a Point Heat Source Using the TOUGH-FLAC Approach
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
수치해석 기법의 강건성은 다양한 모델링 조건에서 계산 성능이 유지되는 것을 의미하며, 새로운 해석기법 또는 수치코드는 벤치마크 테스트를 통해 강건성이 평가될 필요가 있다. TOUGH-FLAC 모델링 기법은 국내외적으로 이산화탄소 지중저장, 사용후핵연료 지층처분, 지열 개발 등 다양한 분야에 적용되었으며, 실험 계측자료, 다른 수치코드들과의 결과 비교를 통해 모델링 유효성이 분석되었다. 본 연구에서는해석해를 갖는 열-수리-역학적 복합거동 문제를 토대로 TOUGH-FLAC 기법의 벤치마크 테스트를 수행하였다. 적용된 해석해는 완전히 포화된 지반에 점열원 작용 시 주변매질의 온도, 간극수압, 역학적 거동과 관계되며, 해석해와 수치모사 결과를 비교하여 TOUGH-FLAC 기법의 강건성이 평가되었다. 또한, 열-수리-역학 해석의 연계항, 유체 상변화, 시간증분이 복합거동 계산에 미치는 영향을 조사하였다.
Abstract
The robustness of a numerical method means that its computational performance is main- tained under various modeling conditions. New numerical methods or codes need to be assessed for robustness through benchmark testing. The TOUGH-FLAC modeling approach has been applied to various fields such as subsurface carbon dioxide storage, geological disposal of spent nuclear fuel, and geothermal development both domestically and inter- nationally, and the modeling validity has been examined by comparing the results with experimental measurements and other numerical codes. In the present study, a benchmark test of the TOUGH-FLAC approach was performed based on a coupled thermal-hydro- mechanical behavior problem with an analytical solution. The analytical solution is related to the temperature, pore water pressure, and mechanical behavior of a fully saturated porous medium that is subjected to a point heat source. The robustness of the TOUGH-FLAC approach was evaluated by comparing the analytical solution with the results of numerical simulation. Additionally, the effects of thermal-hydro-mechanical coupling terms, fluid phase change, and timestep on the computation of coupled behavior were investigated.
참고문헌 (24)
- Battistelli, A., "Improved PetraSim-TOUGH2 capabilities for the simulation of geothermal reservoirs", Proceedings of the 42nd Workshop on Geothermal Reservoir Engineering, Curran Associates (2017)
- Blanco-Martín, L., "Extension of TOUGH-FLAC to the finite strain framework", Computers and Geosciences, 108, pp.67~71 (2017)
- Booker, J. R., "Consolidation around a point heat source", International Journal for Numerical and Analytical Methods in Geomechanics, 9(2), pp.173~184 (1985)
- Chaudhry, A. A., "Consolidation around a point heat source(correction and verification)", International Journal for Numerical and Analytical Methods in Geomechanics, 43(18), pp.2743~2751 (2019)
- Croucher, A. E., "Application of the computer code TOUGH2 to the simulation of supercritical conditions in geothermal systems", Geothermics, 37(6), pp.622~634 (2008)
- "DECOVALEX (DEvelopment of COupled models and their VALidation against EXperiments)" (2024)[URL]
- Gallipoli, D., "The MUSE network: sharing research expertise on unsaturated soils across europe", Proceedings of the 4th International Conference on Unsaturated Soil (2006), American Society of Civil Engineers
- Gerya, T., "Introduction to numerical geodynamic modeling" (2010), Cambridge University Press
- Guo, R., "Prediction of the thermal-hydraulic-mechanical response of a geological repository at large scale and sensitivity analyses", International Journal of Rock Mechanics and Mining Sciences, 136, pp.104484~ (2020)
- Revised release on the IAPWS industrial formulation 1997 for the thermodynamic properties of water and steam, "IAPWS (The International Association for the Properties of Water and Steam)", IAPWS, ~, pp.Report ref. IAPWS R7-97(2012) (2007)
- A formulation of the thermodynamic properties of ordinary water substance, "IFC (International Formulation Committee)", IFC Secretariat, ~ (1967)
- "FLAC3D (Fast Lagrangian Analysis of Continua in 3 Dimensions) software" (2024)[URL]
- Some equation of state modules for TOUGH3, "Jung, Y.", Lawrence Berkeley National Laboratory, ~ (2018)
- Jung, Y., "TOUGH3 user’s guide", Lawrence Berkeley National Laboratory, ~ (2018)
- "TOUGH software" (2024)[URL]
- Maßmann, J., "Thermo-hydromechanical-chemical processes in fractured porous media: modelling and benchmarking" (2016), Springer
- "Methane hydrate reservoir simulator code comparison study" (2020)[URL]
- Nguyen, T. S., "Coupled thermal-mechanical-hydrological behaviour of sparsely fractured rock : implications for nuclear fuel waste disposal", International Journal of Rock Mechanics and Mining Sciences, 32, pp.465~479 (1995)
- "OpenGeoSys – Open-source multi-physics" (2024)[URL]
- Park, D., "Performance evaluation of OGS-FLAC simulator for coupled thermal-hydrological-mechanical analysis", Tunnel and Underground Space, 32, pp.144~159 (2022)
- Rutqvist, J., "A modeling approach for analysis of coupled multiphase fluid flow, heat transfer, and deformation in fractured porous rock", International Journal of Rock Mechanics and Mining Sciences, 39, pp.429~442 (2002)
- Touhidi-Baghini, A., "Absolute permeability of Mcmurray formation oil sands at low confining stresses", Ph.D., pp.1998
- Wu, Y., "Simultaneous solution of helical coiled once-through steam generator with high-speed water property library", Energies, 16, pp.1627~ (2023)
- Zheng, T., "A fully coupled thermo-hydro-mechanical finite element model of freezing in porous media and its application for ground source heat pump systems", Ph.D., pp.2018