Compact CNS shear box를 활용한 모의 절리암석시료의 정적 전단 거동에 관한 연구
Study of the Static Shear Behaviors of Artificial Jointed Rock Specimens Utilizing a Compact CNS Shear Box
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 절리면 암석 시료에 대한 직접 전단시험을 수행하기 위해 새로 고안된 Compact CNS shear box의 성능과 적용 가능성에 대해 조사하였다. 정적 CNS 절리면 직접 전단시험은 인공적으로 거칠기를 생성한 절리 암석을 대상으로 실시하였으며 절리면 거칠기 계수 및 초기 수직응력 조건을 변화시키면서 수행하였다. 또한, DIC 분석을 통해 변위 데이터 검증 및 파괴 패턴을 관찰하였고 실험으로부터도출된 전단 특성들을 기존에 연구되었던 전단 거동 예측 모델들과 비교분석하였다. 그 결과 기존의 특정 경험적 전단 거동 예측 모델과 높은 상관관계를 나타내는 것을 확인하였으며 전단 거동 특성이 파괴패턴과 관련이 있을 가능성에 대해 고찰하였다. 결론적으로, 절리면 전단 특성에 대한 데이터를 제공하는데 있어서 CNS 전단 박스의 적용 가능성과 효과를 입증하였다.
Abstract
In this study, the effectiveness and applicability of a newly designed Compact CNS shear box for conducting direct shear tests on jointed rock specimens were investigated. CNS joint shear tests were conducted on jointed rocks with Artificially generated roughness while varying the fracture surface roughness coefficient and initial normal stress conditions. In addition, displacement data were validated by Digital image correlation analysis, fracture patterns were observed, and comparative analysis was conducted with previously studied shear behavior prediction models. Furthermore, the accuracy of the displacement data was confirmed through DIC analysis, the fracture patterns were observed, and the shear properties obtained from the tests were compared with existing models that predict shear behavior. The findings exhibited a strong correlation with specific established empirical models for predicting shear behavior. Furthermore, the potential linkage between the characteristics of shear behavior and fracture patterns was deliberated. In conclusion, the CNS shear box was shown to be applicable and effective in providing data on the shear characteristics of the joint.
참고문헌 (25)
- Backers, T., "Effect of loading rate on ModeⅠ fracture toughness, roughness and micromechanics of sandstone", International Journal of Rock Mechanics and Mining Sciences, 40(3), pp.415~433 (2003)
- Barton, N., "A relationship between joint roughness and joint shear strength", poceedings of International Symposium on Rock Mechanics, pp.1~8 (1971)
- Barton, N., "Review of a new shear strength criterion for rock joints", Engineering Geology, 7, pp.287~332 (1973)
- Barton, N., "The shear strength of rock and rock joints", International Journal of Rock Mechanics and Mining Sciences &Geomechanics Abstracts, 13(9), pp.255~279 (1976)
- Blaber, J., "Ncorr : open-source 2D digital image correlation Matlab software", Experimental Mechanics, 55, pp.1105~1122 (2015)
- 최승범, "삼차원 인공 절리면의 생성과 이에 대한 거칠기 특성 평가", 터널과 지하공간, 26(6), pp.516~523 (2016), 한국암반공학회
- Dai, F., "Some fundamental issues in dynamic compression and tension tests of rocks using split Hopkinson pressure bar", Rock Mecjamocs Amd Rock Engineering, 43, pp.657~666 (2010)
- Dai, F., "Semicircular bend testing with split hopkinson pressure bar for measuring", The Review of Scientific Instruments, 79(12), pp.123903~ (2008)
- ISRM, "The Complete ISRM Suggested Methods for Rock Characterisation. Testing and Monitoring, 1974-2006", pp.1974~2006 (2007), ISRM Turkish National Group
- 장보안, "암석 절리의 3차원 거칠기 특성화와 수정 전단강도 관계식의 제안", 지질공학, 20(3), pp.319~327 (2010), 대한지질공학회
- Larsson, J., "An Approach to Compensate for the Influence of the System Normal Stiffness in CNS Direct Shear Tests", Rock Mechanics and Rock Engineering, 53, pp.2185~2199 (2020)
- 이덕환, "표면평균기울기를 이용한 암석절리면의 3차원 거칠기 분석에 관한 연구", 터널과 지하공간, 21(6), pp.494~507 (2011), 한국암반공학회
- Lee, Y., "Model for the shear behavior of rock joints under CNL and CNS conditions", International Journal of Rock Mechanics and Mining Sciences, 70, pp.252~263 (2014)
- Oh, S., "Abusitropic influence of fracture toughness on loading rate dependency for granitic rocks", Engineering Fracture Mechanics, 221, pp.106677~ (2019)
- Ooi, L. H., "A Constant Normal Stiffness Direct Shear Device for Static and Cyclic Loading", Geotechnical Testing Journal, 10(1), pp.3~12 (1987)
- Pan, B., "Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review", Measurement Science & Technology (2009)
- 박정욱, "암석 절리면 거칠기의 새로운 3차원 정량화 계수", 터널과 지하공간, 22(2), pp.106~119 (2012), 한국암반공학회[DOI]
- 서현교, "랜덤중점변위법에 의한 거칠기의 생성 및 활용에 관한 연구", 터널과 지하공간, 22(3), pp.196~204 (2012), 한국암반공학회[DOI]
- Shrivastava, A. K., "Shear behaviour of Rock Joints under CN S Boundary Conditions", Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering (2013)
- Son, B. K., "Shear behavior of rock joint under constant normal stiffness condition", Ph. D., pp.2005
- Son, B. K., "Effect of boundary conditions on shear behaviour of rock joints around tunnel", Tunnelling and Underground Space Technology incorporating Trenchless Technology Research, 21(3), pp.347~348 (2006)
- Tse, R., "Estimating joint roughness coefficients", International Journal of Rock Mechanics and Mining Sciences, 47(8), pp.1391~1400 (1979)
- Wang, Q. Z., "Dynamic split tensile test of flattened Brazilian disc of rock with SHPB setup", Mechanics of Meterials, 41(3), pp.252~260 (2009)
- Xia, K., "Effects of microstructures on dynamic compression of Barre granite", International Journal of Rock Mechanics and Mining Sciences, 45(6), pp.879~887 (2008)
- Zhou, Z. L., "Dynamic behavior of rock during its post failure stage in SHPB tests", Transactions of Nonferrous Metals Society of China, 27(1), pp.184~196 (2017)