알루미늄 판의 용접변형해석
Analysis of Weld-induced Deformation in Aluminum Plates
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Abstract
A three-dimensional finite element model has been developed to simulate the MIG P/S welding process of two aluminum plates. The finite element calculations are performed using ANSYS finite element code, which takes into account the thermal and mechanical non-linear material properties. The results of finite element analysis compared with those of experiment to show its validity in view of distortions. Parametric studies are carried out on the validated model to assess the effects of various factors on the final residual distortion. Large deformations, temperature dependent material properties are included in the model. Finally, the formulas of fitting curves of angular distortion transverse shrinkage, and longitudinal shrinkage have been proposed.
참고문헌 (13)
- Fanous I.F.Z, "3-D Finite Element Modeling of the Welding Process Using Element Birth and Element Movement Techniques", 125, pp.144~150 (2003)
- Im D.Y, "A Study on Weldability and Strength of 5000 Aluminium Alloy" (2005)
- Kim J.T, "Analysis of Post Weld Deformation at HAZ by External Forces Based on Inherent Strain", 43(2), pp.220~227 (2006)
- Kim S.I, "Development of Simple Prediction Model for V-groove Butt Welding Deformation", 41(2), pp.106~113 (2004)
- Kim S.I, "Control of Welding Distortion for Thin Panel Block Structure Using Mechanical Tensioning Method", 43(1), pp.68~74 (2006)
- Lee J.S, "Simulator for Weld-Induced Deformation of Panel Blocks", 41(1), pp.55~63 (2004)
- Li Y, "Finite Element Analysis of Residual Stress in the Welded Zone of a High Strength Steel", 27(2), pp.127~132 (2004), Indian Academy of Science
- Oxford, "Analysis of Welded Structure" (1980), Pergamon Press
- Michaleris P, "Prediction of Welding Distortion", 76(4), pp.172s~180s (1997)
- Mollicone P, "Simple Thermo- Elastic-Plastic Models for Welding Distortion Simulation", 176(1-3), pp.77~86 (2006)
- Song H.C, "Numerical Analysis and Experimental Verification of Relaxation and Redistribution of Welding Residual Stresses", 41(6), pp.84~90 (2004)
- Teng T.L, "Analysis of Residual Stresses and Distortions in T-joint Fillet Welds", 78, pp.523~538 (2001)
- Tsirkas S.A, "Numerical Simulation of the Laser Welding Process in Butt-Joint Specimens", 134, pp.59~69 (2003)