마운트 형상에 따른 선박용 해수 이송 배관의 진동 전달률 감소
Reduction of the Vibration Transmissibility for the Sea-Water Conveying Pipe in a Ship According to its Mount Shape
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The reduction of the structure-borne noise is very important in order to reduce the noise of a ship. The noise at the high frequency range usually comes from the fluid flowing. The noise from the sea-water conveying pipe is one of the main source on these high frequency range. Therefore, the transmissiblity variations are evaluated according to the shape of the rubber mount. The evaluations are performed with the frequency response function numerically and experimentally.
Abstract
The reduction of the structure-borne noise is very important in order to reduce the noise of a ship. The noise at the high frequency range usually comes from the fluid flowing. The noise from the sea-water conveying pipe is one of the main source on these high frequency range. Therefore, the transmissiblity variations are evaluated according to the shape of the rubber mount. The evaluations are performed with the frequency response function numerically and experimentally.
참고문헌 (9)
- Andrew C, "An Introduction to R u b b e r Technology" (1999), Rapra Technology LTD
- Chung, J.H, "An Experimental Study on the Characteristics of Rubber Mounts for Naval Shipboard Application", Proceeding of the Annual Spring Meeting SNAK, pp.402~409 (2004)
- Structure Borne Vibratory Acceleration Measurements and Acceptance Criteria of Shipboard Equipment, "Department of Defrnse", Department of Defrnse, ~, pp.MIL-S-70-2 (1986)
- 정의봉, 박경훈, 홍진숙, 한형석, "선체로 전달되는 해수 이송 배관의 진동 저감 분석", 한국소음진동공학회논문집, 18(11), pp.1177~1184 (2008), 한국소음진동공학회
- Kim, W.D, "Estimation and Evaluation of the Mechanical Property for Vibration Isolating Rubber Material", KSNVE, 13(5), pp.319~325 (2003)
- Testing Method for Rubber Vibration Isolator, "Korean Standards Association", Korean Standards Association, ~, pp.KS-M-6604 (2006)
- Lee, G.S, "Test and Analysis for Dynamic Properties of Rubber Materials for Vibration Isolation (1)", KSNVE Autumn Conference, pp.27~32 (1990)
- 문석준, 이현엽, 정우진, 최승복, 지용진, 윤정식, 김재호, "함정용 능동 하이브리드 마운트 개발에 대한 연구", 대한조선학회 논문집, 45(3), pp.288~295 (2008), 대한조선학회
- 노인식, 김정만, 곽정식, "고무 재질 탄성 마운트의 비선형 대변형 거동 해석", 대한조선학회 논문집, 45(2), pp.186~191 (2008), 대한조선학회