빙해선박의 선수 선형에 관한 연구
A Study on the Bow Shape of Ice Breaking Vessel
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The operation scenarios, types of ice, draft and propulsion system are important design point on the beginning stage of the ice breaking vessel. The concept of hull form in ice breaking vessel has to compromise the performance according to the operation route especially if ship is operating in ice and ice free water. The several hull forms were proposed to optimize the capability of the vessel in this paper. The effect of hull form according to type of ice is also discussing and explaining the ice resistance in each ice type as like pack ice, brash ice, level ice, rubble ice and ice ridge. The draft effect was examined and propulsion system for example FPP(Fixed pitch propeller), CPP(Controllable pitch propeller) and POD system was compared focusing on the propulsion efficiency.
Abstract
The operation scenarios, types of ice, draft and propulsion system are important design point on the beginning stage of the ice breaking vessel. The concept of hull form in ice breaking vessel has to compromise the performance according to the operation route especially if ship is operating in ice and ice free water. The several hull forms were proposed to optimize the capability of the vessel in this paper. The effect of hull form according to type of ice is also discussing and explaining the ice resistance in each ice type as like pack ice, brash ice, level ice, rubble ice and ice ridge. The draft effect was examined and propulsion system for example FPP(Fixed pitch propeller), CPP(Controllable pitch propeller) and POD system was compared focusing on the propulsion efficiency.
참고문헌 (10)
- Corlett, E.C.B, "Some aspects of Icebreaker design", The Royal Institution of Naval Architects,, 106(4), pp.389~413 (1964)
- Edward, R.Y, "Influence of Major Characteristics of Icebreaker Hulls on Their Powering Requirements and Maneuverability in Ice", Transactions of SNAME, 84, pp.364~407 (1976)
- Kim, H.S, "Speed-power performance of 95,000 DWT Arctic tanker design", JOMAE (Journal of Offshore Mechanics and Arctic Engineering Transactions of ASME), 127, pp.135~140 (2004)
- 김현수, "Baltic Ice Class IA 를 적용한 115K Ice Tanker 개발", 대한조선학회 논문집, 41(6), pp.120~125 (2004), 대한조선학회
- 김현수, "쇄빙 유조선과 일반 유조선의 저항특성 비교연구", 대한조선학회 논문집, 43(1), pp.759~765 (2006), 대한조선학회
- Lewis, J.W, "Method for predicting Icebreaking and Ice Resistance Characteristics of Icebreakers", Transactions of SNAME, 78, pp.213~249 (1970)
- A study on Bow Hull form Design and Propulsion Type for Ice breaking Vessel with the balance of Open and Ice performance, "Park, H.G.", ICETECH, ~, pp.No. ICETECH08-108-RF. (2008)
- Timco, G.W, "An analysis of the shapes of sea ice ridge", Cold regions science and technology, 25, pp.65~77 (1997)
- Icebreaking Ore Carrier Project for Baffinland Iron Mines Corporation, "Wilkman, G", ICETECH, ~, pp.No. ICETECH08-112-RF. (2008)
- Yamaguchi, H, "Influence of Bow shape on Ice breaking Resistance in Low Speed Range", Proc. Of the 16th OMAE conference, 통권 : IV, pp.51~61 (1997)