곡가공을 위한 변곡 곡면의 판정
Determination of plates with inflection lines for hull plate forming
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Hull plate consists of various types of curved plates and there also exists corresponding processing methods. Typically, curved plates can be divided into convex type and saddle type. Large amount of research has been conducted mainly focusing on application of processing method of convex type, saddle type and hybrid type, but research on determination and processing method application of the most difficult S-shaped curved plate that has inflection lines has not been carried out yet. In this paper, as the fundamental research of appropriate processing method application, a calculation method is proposed to calculate inflection lines on curved plates. In order to calculate inflection lines, normal curvature and information of fabricated curved plates should be utilized. We compare the workability of the fabrication for hull plate using inflection line.
Abstract
Hull plate consists of various types of curved plates and there also exists corresponding processing methods. Typically, curved plates can be divided into convex type and saddle type. Large amount of research has been conducted mainly focusing on application of processing method of convex type, saddle type and hybrid type, but research on determination and processing method application of the most difficult S-shaped curved plate that has inflection lines has not been carried out yet. In this paper, as the fundamental research of appropriate processing method application, a calculation method is proposed to calculate inflection lines on curved plates. In order to calculate inflection lines, normal curvature and information of fabricated curved plates should be utilized. We compare the workability of the fabrication for hull plate using inflection line.
참고문헌 (14)
- Elber, G., "Free form surface analysis using a hybrid of symbolic and numeric computation", Ph.D., Department of Computer Science, pp.1992
- Kim, J., "Optimum Subdivision of Curved Hull Plates for Efficient Ship Manufacture using Minimum Strain Energy", International Journal of Computer Integrated Manufacturing, 25(7), pp.608~624 (2012)
- Kim, Y.I., "Analysis of Ship Hull Plate Bending By Roll Bending Machine", Journal of the Society of Naval Architects of Korea, 33(4), pp.142~149 (1996)
- Ha, Y. S., "A study on the prediction of plate deformation by heating of weaving path in thick plate bending", Master, Department of Naval Architecture and Ocean Engineering, pp.2001
- Meakawa, T., "Interrogation of Differential Geometry Properties for Design and Manufacture", The Visual Computer, 10(4), pp.213~237 (1994)
- 남종호, "가시화를 위한 단면곡선, 반사성질선, 점근선 생성 기법Computation of Section Curves, Reflection Characteristic Lines, and Asymptotic Curves for Visualization", 한국CDE학회 논문집, 8(4), pp.262~269 (2003), 한국CDE학회
- 박정서, "굽힘 변형도를 이용한 선상가열 과정의 곡 펴짐 현상에 관한 연구", 대한조선학회 논문집, 45(4), pp.417~425 (2008), 대한조선학회
- Park, T. J., "Forming information of the first roll bending process by a statistical approach", Master, Department of Naval Architecture and Ocean Engineering, pp.1997
- Patrikalakis, N.M., "Shape Interrogation for Computer Aided Design and Manufacturing" (2002), Springer Verlag
- Ryu, C. H., "A Consistent algorithm for unfolded flat shape of curved ship's hull shells by minimizing strain energy", Ph.D, Department of Naval Architecture and Ocean Engineering, pp.2002
- 유철호, "선체 곡판의 롤 굽힘 공정 변수 결정을 위한가공 형상의 최적 근사 알고리즘", 대한조선학회 논문집, 44(5), pp.517~525 (2007), 대한조선학회
- 성준경, "(A)Problem reduction scheme for solving geometric constraints and its applications", 박사, 컴퓨터공학, pp.2005
- Sherbrooke, E.C., "Computation of the Solutions of Nonlinear Polynomial Systems", Computer Aided Geometric Design, 10(5), pp.379~405 (1993)
- Yun, D.K., "A Determination of Approximated Cylindrical Surfaces of Doubly Curved Surfaces for the Least Line Heating", Journal of the Society of Naval Architects of Korea, 36(3), pp.134~143 (1999)