북해설치 FPSO의 플레어 슬래밍 하중에 대응한 선수 설계
Bow Structure Design of the FPSO installed in the North Sea under the Flare Slamming Load
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This paper is about the bow structure design of the ship-typed and turret moored FPSO which is subjected to the bow-flare slamming load in harsh North Sea environments. Quad 204 FPSO project involves the redevelopment of the existing Schiehallion FPSO which is damaged by impact wave loads. Normally all offshore systems including FPSO are designed to withstand the 100 year storm I.e. the storm that happens once every hundred years at the location where the system is installed. Several incidents have revealed that impact loading is important issue for moored floating production systems. In this paper, the design impact loads are estimated considering the ship owner’s specification, measured data from model tests, requirements of the classification society rules and results of numerical simulation analyses. The impact pressure by numerical analysis is 1.8 times greater than required value by CSR adopted by IACS. Based on the selected design load, plastic design formulae allowing the local material yielding are applied for the initial scantling of the bow structure. To verify the structural integrity, FE analyses are carried out considering the local area subjected to the impact wave loads. Their results such as structural arrangement, design loads and scantlings are shown and discussed. It is found that plastic design formulae in adopting Initial design phase give sufficiently conservative results in terms of structural strength.
Abstract
This paper is about the bow structure design of the ship-typed and turret moored FPSO which is subjected to the bow-flare slamming load in harsh North Sea environments. Quad 204 FPSO project involves the redevelopment of the existing Schiehallion FPSO which is damaged by impact wave loads. Normally all offshore systems including FPSO are designed to withstand the 100 year storm I.e. the storm that happens once every hundred years at the location where the system is installed. Several incidents have revealed that impact loading is important issue for moored floating production systems. In this paper, the design impact loads are estimated considering the ship owner’s specification, measured data from model tests, requirements of the classification society rules and results of numerical simulation analyses. The impact pressure by numerical analysis is 1.8 times greater than required value by CSR adopted by IACS. Based on the selected design load, plastic design formulae allowing the local material yielding are applied for the initial scantling of the bow structure. To verify the structural integrity, FE analyses are carried out considering the local area subjected to the impact wave loads. Their results such as structural arrangement, design loads and scantlings are shown and discussed. It is found that plastic design formulae in adopting Initial design phase give sufficiently conservative results in terms of structural strength.
참고문헌 (15)
- Biggs, J. M., "Introduction to Structural Dynamics" (1982), Mcgraw-hill Book Company
- Brizzolara, S., "Comparison of Experimental and numerical loads on an impacting Bow Section", Ships and Offshore Structures, 3(4), pp.305~324 (2008)
- Common Structural Rules for Double Hull Oil Tankers, "CSR", IACS, ~ (2010)
- DNV-OS-C102, "Structural Design of Offshore", Det Norske Veritas, ~ (2008)
- FOIFL, "Rules and Regulations for the Classification of a Floating Offshore Installation at a Fixed Location, Part 4 Steel Unit Structures Lloyd’s Register", Lloyd’s Register, ~ (2008)
- Gorf, G., "FPSO bow damage in steep waves", Proceedings of a Workshop Organized by Ifremer, pp.37~46 (2000)
- Kim, P.Y., "Development of a program for calculation of bow impact pressure and structural scantlings", Proceedings of the Annual Spring Meeting, pp.271~274 (2001), SNAK
- 김용직, "선수 플레어 충격압력 추정과 구조설계에의 응용 - 탱커와 산적화물선 -", 대한조선학회 논문집, 40(3), pp.22~28 (2003), 대한조선학회
- 김용직, "선수 플레어 충격압력 추정과 구조설계에의 응용 - 콘테이너선과 자동차 운반선 -", 대한조선학회 논문집, 40(3), pp.29~36 (2003), 대한조선학회
- 임호정, "FPSO 선수부 갑판침수 현상에 대한 실험 및 수치적 검증", 대한조선학회 논문집, 49(1), pp.6~13 (2012), 대한조선학회
- Summary Report on Design Guidance and Assessment Methodologies for Wave Slam and Green Water Impact Loading, "SAFE-FLOW JIP", EU, 2004, Report No. 15874-1-OE, EU Project No. GRD1-2000-25656
- Soares, G.C., "2004. An approach to calculate the probability of wave impact on an FPSO bow", Proceedings of OMAE04, pp.1~9 (2004)
- Voogt, A., "Prediction of wave impact loads on ship-type offshore structures in steep fronted waves", Proceedings 14th International Offshore Polar Engineering Conference, pp.350~358 (2004)
- Wave slap loading on FPSO bows, "Xu, L.", University of Glasgow and Strathclyde, ~, pp.HSE Books Research Report 324 (2005)
- Yoon, M.C., "Improvement of container carrier forward structure under bow impact load", Proceedings of the Annual Spring Meeting, pp.267~270 (2001), SNAK