순차적 설계기법에 의한 DWT 75,000 정유운반선의 선형설계
Stepwise Hull Form Design of DWT 75,000 Product Oil Carrier
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
To design the modified hull form with relatively unfavorable dimensions and constraints than the parent ship the stepwise design was applied. In each design step the resistance characteristics was estimated by numerical calculations using CFD programs as Wavis 1.4, Wavis 2.1 and Fluent 12.1. The wave profiles along hull surface by potential flow calculations were investigated to improve wave resistance by modifying the bow shapes. To improve the stern shapes with a point of viscous form resistance the pressure distributions on hull surface and the limiting streamlines are investigated by viscous flow calculations. The design objectives such as shortening the LBP, enlarging the propeller tip clearance, moving forward of the LCB location and increasing the displacement were applied by stepwise to develop the new hull form of DWT 75,000 product oil carrier. Finally a new hull form was developed without the resistance performance loss compared with the parent ship.
Abstract
To design the modified hull form with relatively unfavorable dimensions and constraints than the parent ship the stepwise design was applied. In each design step the resistance characteristics was estimated by numerical calculations using CFD programs as Wavis 1.4, Wavis 2.1 and Fluent 12.1. The wave profiles along hull surface by potential flow calculations were investigated to improve wave resistance by modifying the bow shapes. To improve the stern shapes with a point of viscous form resistance the pressure distributions on hull surface and the limiting streamlines are investigated by viscous flow calculations. The design objectives such as shortening the LBP, enlarging the propeller tip clearance, moving forward of the LCB location and increasing the displacement were applied by stepwise to develop the new hull form of DWT 75,000 product oil carrier. Finally a new hull form was developed without the resistance performance loss compared with the parent ship.
참고문헌 (7)
- Bak, S., "A study on the application of WAVIS for evaluation of hull form", Proceedings of the Annual Autumn Conference, SNAK (2015)
- Cho, S. H., "The Optimization method of hull form performance by limiting streamline tracing technique", Master, pp.2011
- 최정규, "수치해석을 이용한 선박의 자항성능 추정법 연구", 박사, 선박해양공학과 선박해양유체전공, pp.2014
- 김희정, "CFD를 이용한 선미선형 최적화 기법 개발", 대한조선학회 논문집, 44(6), pp.564~571 (2007), 대한조선학회
- 박현석, "CSR적용 극비대선의 저항성능 개선에 관한 연구", 대한조선학회 논문집, 48(2), pp.99~106 (2011), 대한조선학회
- Sherbaz, S., "Operational Options for Green Ship", Journal of Marine Science and Application, 11(3), pp.335~340 (2012)
- Yoo, J., "A Study on the Design of Ship’s Bow Form using Surface Panel Method", Journal of the Society of Naval Architects of Korea, 33(3), pp.35~47 (1996)