선박 기관시스템 보조기기의 상태기반 고장진단/예측을 위한 고장 모사 데이터베이스 구축
A Study on the Development of a Failure Simulation Database for Condition Based Maintenance of Marine Engine System Auxiliary Equipment
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
This study is to develop database by an experimental method for the development of condition based maintenance for auxiliary equipment in marine engine systems. Existing ships have been performing regular maintenance, so the actual measurement data development is very incomplete. Therefore, it is best to develop a database on land tests. In this paper, a database developed by an experimental method is presented. First, failure case analysis and reliability analysis were performed to select a failure mode. For the failure simulation test, a test bed for land testing was developed. The failure simulation test was performed based on the failure simulation scenario in which the failure simulation test plan was defined. A 1.5TB failure simulation database has been developed, and it is expected to serve as a basis for ship failure diagnosis and prediction algorithm model development.
Abstract
This study is to develop database by an experimental method for the development of condition based maintenance for auxiliary equipment in marine engine systems. Existing ships have been performing regular maintenance, so the actual measurement data development is very incomplete. Therefore, it is best to develop a database on land tests. In this paper, a database developed by an experimental method is presented. First, failure case analysis and reliability analysis were performed to select a failure mode. For the failure simulation test, a test bed for land testing was developed. The failure simulation test was performed based on the failure simulation scenario in which the failure simulation test plan was defined. A 1.5TB failure simulation database has been developed, and it is expected to serve as a basis for ship failure diagnosis and prediction algorithm model development.
참고문헌 (20)
- "Separator manual - Flex separation systems, S-separators 805", 815, 2015
- "The Alfa Laval Adaptive Fuel Line", Alfa laval, ~ (2018)
- Choi, J. H., "Introduction prognostics and health management(PHM)", Journal of the Korean Society of Mechanical Engineers, 53(7), pp.26~34 (2013)
- Hassan, A.R., "Diagnosis of pulley-belt system faults using vibration analysis technique", Journal of University of Babylon for Engineering Sciences, 26(2), pp.167~180 (2018)
- 허준영, "회전기기 진동분석에 의한 설비신뢰성 향상에 관한 연구", 대한안전경영과학회지, 6(2), pp.231~240 (2004), 대한안전경영과학회
- Kim, J., "Technology trends and preparation for an autonomous ship", Bulletin of the Society of Naval Architects of Korea, 56(4), pp.4~7 (2019)
- 김승일, "진동 데이터의 시간영역 특징 추출에 기반한 고장 분류 모델", 한국전산구조공학회논문집, 34(1), pp.25~33 (2021), 한국전산구조공학회[DOI]
- "Operating instructions KRAL screw pumps", KRAL, ~ (2019)
- "Naval equipment failure case book" (2019), Korea coast guard
- "Maritime autonomous surface ships technology development business plan", Korean register, ~ (2020)
- "Mechanical vibration-evaluation of machine vibration by measurements on nonrotating parts-part1: General guidelines", KS B ISO 10816-1, ~ (1995)
- "Mechanical vibration-evaluation of machine vibration by measurements on nonrotating parts-part 3", KS B ISO 10816-3, ~ (2001)
- Lee, S.H., "The direction of industry 4.0 and prognostics and health management(PHM)", Journal of the Korean Society for Noise and Vibration Engineering, 25(1), pp.22~28 (2015)
- Lee, K. D., "Studies on the diagnosis system of the high speed diesel engine for the small vessels", Journal of the Korea Ship Safety Technology Authority, 26, pp.24~35 (2009)
- Lim, W.Q., "Vibration-based fault diagnostic platform for rotary machines", IECon 2010-36th Annual Conference on IEEE Industrial Electronics Society (2010)
- "Machinery Fault Diagnosis-Empowering Pumps", LUDECA., ~ (2011)
- "Vibration diagnostic guide", Monitoring, S.C., ~ (1994)
- Naval Surface Warfare Center-Carderock Division., "Handbook of reliability prediction procedures for mechanical equipment, NSWC-10" (2010)
- "Offshore Reliability Data. 4th Ed" (2009), OREDA
- Yue, M. G., "Belt vibration consideration moving contact and parametric excitation", Journal of Mechanical Design, 115(4), pp.1024~1030 (1992)
