D-최적 실험 설계 기반 최적 센서 배치 및 모델 확장 기법을 이용한 하중 추정
Load Recovery Using D-Optimal Sensor Placement and Full-Field Expansion Method
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
To detect and prevent structural damage caused by various loads on marine structures and ships, structural health monitoring procedure is essential. Estimating loads acting on the structures which are measured by sensors that are mounted properly are crucial for structural health monitoring. However, attaching an excessive number of sensors to the structure without consideration can be inefficient due to the high costs involved and the potential for inducing structural instability. In this study, we introduce a method to determine the optimal number of sensors and their optimized locations for strain measurement sensors, allowing for accurate load estimation throughout the structure using model expansion method. To estimate the loads exerted on the entire structure with minimal sensors, we construct a strain-load interpolation matrix using the strain mode shapes of the finite element (FE) model and select the optimal sensor locations by applying D-Optimal Design and the row exchange algorithm. Finally, we estimate the loads exerted on the entire structure using the model expansion method. To validate the proposed method, we compare the results obtained by applying the optimal sensor placement and model expansion method to an FE model subjected to arbitrary loads with the loads exerted on the entire FE model, demonstrating efficiency and accuracy.
Abstract
To detect and prevent structural damage caused by various loads on marine structures and ships, structural health monitoring procedure is essential. Estimating loads acting on the structures which are measured by sensors that are mounted properly are crucial for structural health monitoring. However, attaching an excessive number of sensors to the structure without consideration can be inefficient due to the high costs involved and the potential for inducing structural instability. In this study, we introduce a method to determine the optimal number of sensors and their optimized locations for strain measurement sensors, allowing for accurate load estimation throughout the structure using model expansion method. To estimate the loads exerted on the entire structure with minimal sensors, we construct a strain-load interpolation matrix using the strain mode shapes of the finite element (FE) model and select the optimal sensor locations by applying D-Optimal Design and the row exchange algorithm. Finally, we estimate the loads exerted on the entire structure using the model expansion method. To validate the proposed method, we compare the results obtained by applying the optimal sensor placement and model expansion method to an FE model subjected to arbitrary loads with the loads exerted on the entire FE model, demonstrating efficiency and accuracy.
참고문헌 (19)
- Arrichiello, V., "Systems Engineering and Digital Twin: A Vision for the Future of Cruise Ships Design, Production and Operations", International Journal of Interactive Design Manufacturing, 14, pp.115~122 (2020)
- Bathe, K. J., "Finite Element Procedures" (1996), Prentice Hall
- Boo, S. H., "A dynamic condensation method using algebraic substructuring", International Journal for Numerical Methods in Engineering, 109(12), pp.1701~1720 (2017)
- Boo, S. H., "Towards improving the enhanced Craig-Bampton method", Computers and Structures, 196, pp.63~75 (2018)
- Busby, H. R., "Solution of an inverse dynamics problem using an eigenvalue reduction technique", Computers & Structures, 25(1), pp.109~117 (1987)
- Craig, R. R., "Coupling of substructures for dynamic analysis", American Institute of Aeronautics and Astronautics(AIAA)Journal, 6(7), pp.1313~1319 (1968)
- Desanghere, G., "Identification of external forces based on transferfunction measurements: frequency response method", Proceedings of the 8th International Seminar on Modal Analysis (1983)
- Fedorov, V. V., "Theory of optimal experiments", pp.292~ (1972), Academic Press Inc
- Ferrero, R., "Analysis of the genetic algorithm operators for the node location problem in local positioning systems", Proceedings of the International Conference on Hybrid Artificial Intelligence Systems, pp.273~283 (2020)
- Galil, Z., "Time and space-saving computer methods, related to Mitchell’s DETMAX, for finding d-optimum designs", Technometrics, 22(3), pp.301~313 (1980)
- Inverse methods for load identification augmented by optimal sensor placement and model order reduction, "Gupta, D. K.", Department of mechanical engineering University of Wisconsin Milwaukee, ~ (2013)
- Modal expansion using strain mode shapes, "Javad, B.", Experimental Mechanics Laboratory, ~ (2018)
- John, O’Callahan, "System equivalent reduction expansion process", Proceedings of the 7th International Modal Analysis Conference, pp.29~37 (1988)
- Johnson, M., "Some guidelines for constructing exact d-optimal designs on convex design spaces", Technometrics, 25(3), pp.271~277 (1983)
- Jones, D., "Characterising the digital twin: A systematic literature review", Journal of Manufacturing Science and Technology, 29, pp.36~52 (2020)
- Masroor, S. A., "Designing an all-purpose force transducer", Experimental Mechanics, 31(1), pp.33~35 (1991)
- Mitchell, T. J., "An algorithm for the construction of "d-optimal" experimental designs", Technometrics, 16(2), pp.203~210 (1974)
- Newmark, N. M., "A method of computation for structural dynamics", Journal of the Engineering Mechanics Division, 85, pp.67~94 (1959)
- Penrose, Z. A., "Generalized inverse for matrices", Proc. Cambridge Philos. Soe, 51 (1954)