하이브리드 난류 모델을 이용한 전류고정덕트 후류의 고정도 수치 해석
Computational Simulations of Turbulent Wake Behind a Pre-Swirl Duct Using a Hybrid Turbulence Model with High Fidelity
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A hybrid turbulence model has developed by combining a sub-grid scale model using dynamic k equation in LES with k-ωSST model of RANS equation. To ascertain potential applicability of the hybrid turbulence model, fully developed turbulent channel flows at Reτ=180 have been simulated of which computational domain has a top wall with coarse cells and a bottom wall with fine cells. The streamwise mean velocity and turbulent intensity profiles showed a good agreement with DNS data when using the hybrid model rather than using a single model in k-ωSST or dynamic k equation models. Computational simulations of turbulent flows around KVLCC2 with a pre-swirl duct have been mainly performed using the hybrid turbulence model. Compared to the results obtained from RANS simulation with k-ω SST model as well as LES with dynamic k equation SGS model, turbulent wakes of the duct in the present simulation using the hybrid turbulence model were very similar to that of LES. Also, the resistances acting on hull, rudder and duct in hybrid turbulence model were similar to those in RANS simulation whereas the viscous forces acting on the hull in LES had a significant error due to coarse cells inappropriate to the sub-grid scale model.
Abstract
A hybrid turbulence model has developed by combining a sub-grid scale model using dynamic k equation in LES with k-ωSST model of RANS equation. To ascertain potential applicability of the hybrid turbulence model, fully developed turbulent channel flows at Reτ=180 have been simulated of which computational domain has a top wall with coarse cells and a bottom wall with fine cells. The streamwise mean velocity and turbulent intensity profiles showed a good agreement with DNS data when using the hybrid model rather than using a single model in k-ωSST or dynamic k equation models. Computational simulations of turbulent flows around KVLCC2 with a pre-swirl duct have been mainly performed using the hybrid turbulence model. Compared to the results obtained from RANS simulation with k-ω SST model as well as LES with dynamic k equation SGS model, turbulent wakes of the duct in the present simulation using the hybrid turbulence model were very similar to that of LES. Also, the resistances acting on hull, rudder and duct in hybrid turbulence model were similar to those in RANS simulation whereas the viscous forces acting on the hull in LES had a significant error due to coarse cells inappropriate to the sub-grid scale model.
참고문헌 (7)
- 황아영, "입구 속도장 내삽이 난류 채널에 미치는 영향", 한국전산유체공학회지, 24(2), pp.101~107 (2019), 한국전산유체공학회[DOI]
- John Kim, "Turbulence statistics in fully developed channel flow at low Reynolds number", Journal of Fluid Mechanics, 177, pp.133~166 (1987), Cambridge University Press (CUP)[DOI]
- 이기승, "선미의 불균일 유동장에서 받음각을 고려한 비대칭 전류고정날개 설계", 대한조선학회 논문집, 56(4), pp.352~360 (2019), 대한조선학회[DOI]
- 이철민, "날개의 형상 변화에 따른 LNG선용 비대칭 전류고정날개 설계", 대한조선학회 논문집, 53(1), pp.37~44 (2016), 대한조선학회
- 신현준, "선박용 연료절감장치 Pre-Swirl Duct의 설계 및 평가방법 연구", 대한조선학회 논문집, 50(3), pp.145~152 (2013), 대한조선학회
- 신현준, "Numerical and experimental investigation of conventional and un-conventional preswirl duct for VLCC", International Journal of Naval Architecture and Ocean Engineering, 5(3), pp.414~430 (2013), 대한조선학회
- 유광열, "176k Bulk Carrier에 대한 신개념 타입의 Pre-Swirl Duct의 개발 및 CFD 해석", 대한조선학회 논문집, 56(4), pp.373~382 (2019), 대한조선학회[DOI]
