분리층의 상대 변위를 이용한 고분자 미끄럼 촉각 센서 개발
Development of Polymer Slip Tactile Sensor Using Relative Displacement of Separation Layer
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
To realize a robot hand interacting like a human hand, there are many tactile sensors sensing normal force, shear force, torque, shape, roughness and temperature. This sensing signal is essential to manipulate object accurately with robot hand. In particular, slip sensors make manipulation more accurate and breakless to object. Up to now several slip sensors were developed and applied to robot hand. Many of them used complicate algorithm and signal processing with vibration data. In this paper, we developed novel principle slip sensor using separation layer. These two layers are moved from each other when slip occur. Developed sensor can sense slip signal by measuring this relative displacement between two layers. Also our principle makes slip signal decoupled from normal force and shear force without other sensors. The sensor was fabricated using the NBR(acrylo-nitrile butadiene rubber) and the Ecoflex as substrate and a paper as dielectric. To verify our sensor, slip experiment and normal force decoupling test were conducted.
Abstract
To realize a robot hand interacting like a human hand, there are many tactile sensors sensing normal force, shear force, torque, shape, roughness and temperature. This sensing signal is essential to manipulate object accurately with robot hand. In particular, slip sensors make manipulation more accurate and breakless to object. Up to now several slip sensors were developed and applied to robot hand. Many of them used complicate algorithm and signal processing with vibration data. In this paper, we developed novel principle slip sensor using separation layer. These two layers are moved from each other when slip occur. Developed sensor can sense slip signal by measuring this relative displacement between two layers. Also our principle makes slip signal decoupled from normal force and shear force without other sensors. The sensor was fabricated using the NBR(acrylo-nitrile butadiene rubber) and the Ecoflex as substrate and a paper as dielectric. To verify our sensor, slip experiment and normal force decoupling test were conducted.
참고문헌 (16)
- P. J. McKerrow, "Introduction to Robotics" (1992), Addison-Wesley
- Johan Tegin, "Tactile sensing in intelligent robotic manipulation – a review", Industrial Robot: An International Journal, 32(1), pp.64~70 (2005)
- Allen, Peter K, "Integration of vision, force and tactile sensing for grasping", Int. J. Intelligent Machines (1999)
- Lee, Mark H, "Review Article Tactile sensing for mechatronics—a state of the art survey", Mechatronics, 9(1), pp.1~31 (1999)
- Westling, G, "Factors influencing the force control during precision grip", Experimental Brain Research, 53(2), pp.277~284 (1984)
- Becedas, Jonathan, "Two-flexible-fingers gripper force feedback control system for its application as end effector on a 6-DOF manipulator", Robotics, IEEE Transactions on, 27(3), pp.599~615 (2011)
- Wettels, Nicholas, "Grip control using biomimetic tactile sensing systems", Mechatronics, IEEE, 2009, pp.14(6), 718~723
- Cannata, Giorgio, "An embedded tactile and force sensor for robotic manipulation and grasping", Humanoid Robots, 2005 5th IEEE-RAS International Conference on (2005), IEEE
- Engeberg, Erik D, "Adaptive sliding mode control for prosthetic hands to simultaneously prevent slip and minimize deformation of grasped objects", Mechatronics, IEEE, 2013, pp.18(1), 376~385
- Tremblay, Marc R, "Estimating friction using incipient slip sensing during a manipulation task", Robotics and Automation, 1993. Proceedings., 1993 IEEE International Conference on (1993), IEEE
- Lazzarini, Roberto, "A tactile array sensor layered in an artificial skin", Intelligent Robots and Systems 95. ‘Human Robot Interaction and Cooperative Robots,’ Proceedings. 1995 IEEE, 1995, pp.3, ~[DOI]
- Gunji, Daisuke, "Grasping force control of multifingered robot hand based on slip detection using tactile sensor", Robotics and Automation, 2008. ICRA 2008. IEEE International Conference on, pp.2008~ (2008), IEEE
- Fishel, Jeremy A, "A robust micro-vibration sensor for biomimetic fingertips", Biomedical Robotics and Biomechatronics, 2008. BioRob 2008. 2nd IEEE RAS & EMBS International Conference on (2008), IEEE
- Zhang, Xiaoyou, "Slip detection by array-type pressure sensor for a grasp task", Mechatronics and Automation (ICMA), 2012 International Conference on (2012), IEEE
- Fernandez, Raul, "Micro-vibration-based slip detectionin tactile force sensors", Sensors, 14(1), pp.709~730 (2014)
- Kim, Baek-chul, "Design of slip detection sensor for artificial skin", Ubiquitous Robots and Ambient Intelligence (URAI), 2012 9th International Conference on (2012), IEEE