모듈러 로봇의 작업 적응성을 위한자가 재구성 제어 엔진
Design of Self-Reconfigurable Kinematics and Control Engine for Modular Robot
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This paper proposes a design methodology of self-reconfigurable kinematics and control engine for modular and reconfigurable robots. A modular manipulator has been proposed to meet the requirement of task adaptation in versatile needs for service and industrial robot area and the function of self-reconfiguration is required to extend the application of modular robots. Kinematic and dynamic contexts are extracted from the module and assembly information and related codes are automatically generated including controller. Thus a user can easily build and use a modular robot without professional knowledge. Simulation results are presented to verify the validity of the proposed method.
Abstract
This paper proposes a design methodology of self-reconfigurable kinematics and control engine for modular and reconfigurable robots. A modular manipulator has been proposed to meet the requirement of task adaptation in versatile needs for service and industrial robot area and the function of self-reconfiguration is required to extend the application of modular robots. Kinematic and dynamic contexts are extracted from the module and assembly information and related codes are automatically generated including controller. Thus a user can easily build and use a modular robot without professional knowledge. Simulation results are presented to verify the validity of the proposed method.
참고문헌 (8)
- K. Gilpin, "Modular Robot Systems", IEEE Robotics & Automation Magazine, 17(3), pp.38~55 (2010)
- M. Yim, "Modular Robots", IEEE Spectrum, 39(2), pp.30~34 (2002)
- G. Liu, "Design, Analysis, and Control of a Spring-Assisted Modular and ReconfigurableRobot", IEEE Trans. on Mechatronics, 16(4) (2011)
- S. Castro, "High-Level Control of Modular Robots", IEEE, 2011, ~
- W-H. Zhu, "Precision Control of Modular Robot Manipulators: The VDC Approach With Embedded FPGA", IEEE Trans. on Robotics, 29(5) (2013)
- 홍성훈, "다양한 관절 구성을 위한 모듈라 매니퓰레이터의 관절 및 링크 모듈 형상 도출", 로봇학회 논문지, 11(3), pp.163~171 (2016), 한국로봇학회[DOI]
- G. Liu, "Distributed Modular and Reconfigurable Robot Control with Torque Sensing", IEEE International Conference on Mechatronics and Automation (2006)
- K.J. Åstrӧm, "Automatic Tuning of PID Controllers", Instrument Society of America, ~ (1988)