원격해체 작업을 위한 유압 시스템의 SPO 기반 반력 추정 및 힘 반향 양방향 원격제어
SPO based Reaction Force Estimation and Force Reflection Bilateral Control of Cylinder for Tele-Dismantling
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
For dismantling heavy structure under special environment in radioactivity, there are many problems which should be tele-operated and feedback a cutting force for cutting a thick structure such as concrete. When operator dismantles a thick heavy concrete structure, it is in sufficient to judge whether robot is contacting or not with environment by using only vision information. To overcome this problem, force feedback and impedance model based bilateral control are introduced. The sliding mode control with sliding perturbation observer (SMCSPO) based bilateral control is applied and surveyed to a single rod hydraulic cylinder in this paper. The sliding mode control is used for robustness against a disturbance. The sliding perturbation observer is used for estimation of a reaction force such as cutting force. The bilateral control is executed using the information of reaction force estimated by SMCSPO. The contribution of this paper is that the estimation method and bilateral control of the single rod hydraulic cylinder are introduced and discussed by experiment.
Abstract
For dismantling heavy structure under special environment in radioactivity, there are many problems which should be tele-operated and feedback a cutting force for cutting a thick structure such as concrete. When operator dismantles a thick heavy concrete structure, it is in sufficient to judge whether robot is contacting or not with environment by using only vision information. To overcome this problem, force feedback and impedance model based bilateral control are introduced. The sliding mode control with sliding perturbation observer (SMCSPO) based bilateral control is applied and surveyed to a single rod hydraulic cylinder in this paper. The sliding mode control is used for robustness against a disturbance. The sliding perturbation observer is used for estimation of a reaction force such as cutting force. The bilateral control is executed using the information of reaction force estimated by SMCSPO. The contribution of this paper is that the estimation method and bilateral control of the single rod hydraulic cylinder are introduced and discussed by experiment.
참고문헌 (16)
- J. W. Cho, "Investigation of the Emergency Response Robots Used for Mitigation of Severe Accident of the Fukushima Nuclear Power Plant", Institute of Control, Robotics and Systems Conference, pp.1~8 (2011)
- J. S. Hong, "The Policy, R & D Trends and Key Issues after the Fukushima Nuclear Accident", Korea Institute of S&T Evaluation and Planning, 5 (2012)
- V. Stojanovic, "Comparative analysis of master-slave latches and flip-flops for highperformance and low-power systems", Solid-State Circuits, IEEE Journal, 34(4), pp.536~548 (1999)
- T. D. Cho, "A Study on the Robust Position Control of Single-rod Hydraulic System", Journal of the Korean Society Precision Engineering, 16(3), pp.128~135 (1999)
- M. Jelali, "Hydraulic servo- systems:modelling, identification and control" (2012), Springer Science & Business Media
- 윤성민, "복강경 수술 로봇의 힘 반향을 위한 임피던스 모델 기반의 양방향 제어", 제어.로봇.시스템학회 논문지, 20(8), pp.801~806 (2014), 제어·로봇·시스템학회[DOI]
- 박현준, "손과 팔의 협업에 의한 로봇 펙인홀 작업", 로봇학회 논문지, 10(1), pp.42~51 (2015), 한국로봇학회[DOI]
- 송승우, "기계식 중력보상 기반의 중량물 취급용 5자유도 로봇머니퓰레이터의 개발", 로봇학회 논문지, 11(4), pp.242~247 (2016), 한국로봇학회
- 조승호, "비례 방향제어 밸브에 의하여 구동되는 유압실린더-부하계의 단순 적응 위치제어", 한국정밀공학회지, 28(8), pp.936~941 (2011), 한국정밀공학회
- 박민규, "Identification of Motion Platform Using the Signal Compression Method with Pre-Processor and Its Application to Siding Mode Control", Journal of Mechanical Science and Technology, 16(11), pp.3~1394 (2002), 대한기계학회
- M. C. Lee, "Identification and Its Evaluation of the System with a Nonlinear Element by Signal Compression Method", SICE, 25(7), pp.729~736 (1989)
- H. B. Shim, "State space analysis of disturbance observer and a robust stability condition", Decision and Control, 2007 46th IEEE Conference on, pp.2193~2198 (2007), IEEE
- Min Cheol Lee, "Sliding Mode Controller with Sliding Perturbation Observer Based on Gain Optimization using Genetic Algorithm", Journal of Mechanical Science and Technology, 18(4), pp.630~639 (2004), 대한기계학회
- M. C. Lee, "Reaction Force Estimation of Surgical Robot Instrument Using Pperturbation Observer with SMCSPO Algorithm", IEEE, 2010, 181~186
- 윤성민, "Design of Bilateral Control for Force Feedback in Surgical Robot", International Journal of Control, Automation, and Systems, 13(4), pp.916~925 (2015), 제어·로봇·시스템학회[DOI]
- J. T. Moura, "Sliding mode control with sliding perturbation observer", Journal of Dynamic Systems, Measurement, and Control, 119(4), pp.657~665 (1997)