상수도 배관의 갱생 공정을 위한 배관 건설 로봇 개발
Development of the Pipe Construction Robot for Rehabilitation Work Process of the Water Pipe Lines
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
In this paper describes the research and development of a pipe robot for pipe rehabilitation construction of old water pipes. After the water supply pipe construction, the pipe is leaking, damaged, and aging due to corrosion. Eventually, resistance to the flow of water in lower supply efficiency and contaminated water such as rusty water, finally in various consumer complaints. In order to solve this problem, rehabilitation construction robot technology is required to secure the construction quality of pipe rehabilitation construction and restore the function of the initial construction period. The developed pipe rehabilitation construction robot required a hydraulic actuator for high traction and was equipped with a small hydraulic supply device. In addition, we have developed a hydraulic cylinder and a link system that supports the pipe inner diameter to develop a single pipe robot corresponding to 500 to 800mm pipe diameter. The analysis and experimental verification of the driving performance and unit function of the developed pipe reconstruction robot are explained, and the result of the integrated performance test of the pipe reconstruction robot at the water supply pipe network site is explained.
Abstract
In this paper describes the research and development of a pipe robot for pipe rehabilitation construction of old water pipes. After the water supply pipe construction, the pipe is leaking, damaged, and aging due to corrosion. Eventually, resistance to the flow of water in lower supply efficiency and contaminated water such as rusty water, finally in various consumer complaints. In order to solve this problem, rehabilitation construction robot technology is required to secure the construction quality of pipe rehabilitation construction and restore the function of the initial construction period. The developed pipe rehabilitation construction robot required a hydraulic actuator for high traction and was equipped with a small hydraulic supply device. In addition, we have developed a hydraulic cylinder and a link system that supports the pipe inner diameter to develop a single pipe robot corresponding to 500 to 800mm pipe diameter. The analysis and experimental verification of the driving performance and unit function of the developed pipe reconstruction robot are explained, and the result of the integrated performance test of the pipe reconstruction robot at the water supply pipe network site is explained.
참고문헌 (14)
- "2018 Statistics of waterworks"[URL]
- "Review of water supply pipeline rehabilita-tion method and application plan in Daejeon" (2013)[URL]
- "Water Pipe Rehabilitation Technology"[URL]
- 이재열, "산업배관의 이물질 청소를 위한 배관청소로봇의 개발", 로봇학회 논문지, 12(1), pp.65~77 (2017), 한국로봇학회
- J. -J. Kim, "Study of In-Pipe Robot Technology", The Korean Institute of GAS, pp.64~64 (2017)
- M. -S. Jeong, "Rescue Recovery System Develo-pment of Nondestructive Inspection Pipe Robot", KSPE Autumn Conference, pp.143~144 (2015)
- 이채혁, "엘보 인식에 의한 배관로봇의 실시간 위치 추정 및 후처리 위치 측정 알고리즘", 제어.로봇.시스템학회 논문지, 20(10), pp.1044~1050 (2014), 제어·로봇·시스템학회[DOI]
- Jae-Youl Lee, "Development of automated lay-up robot system for jointing process of GRP pipes", Modern Physics Letters B, 34(07n09), pp.2040041~ (2020), World Scientific Pub Co Pte Ltd[DOI]
- 김도완, "클러치기반의 선택적 구동방식을 이용한 배관로봇의 개발", 대한기계학회논문집 A, 32(3), pp.223~231 (2008), 대한기계학회
- 이재열, "250~500A 배관 내부 청소를 위한 로봇의 개발", 동력시스템공학회지, 22(5), pp.13~26 (2018), 한국동력기계공학회[DOI]
- K. -J. Lee, "Hydraulic Circuit and Cylinder of Servo Motor Direct Driven Hydraulic Press", Korean Society for Precision Engineering, pp.1301~1302 (2013)
- S. -G. Roh, "Development of Differentially Driven Inpipe Inspection Robot for Underground Gas Pipeline", Transactions of the Korean Society of Mechanical Engineers A, 25(12), pp.2019~2029 (2001)[DOI]
- 최형식, "배관 검사 및 청소 로봇의 개발", 한국마린엔지니어링학회지, 33(5), pp.662~671 (2009), 한국마린엔지니어링학회
- S.-C. Han, "Research of Climbing Robot System for Pipe inspection", M.S, Department of Mechani-cal Engineering, pp.2011