기구학적 여유 자유도를 지니는 전방향 모바일 로봇에 관한 연구
Study of an Omni-derectional Mobile Robot with Kinematic Redundancy
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Most omni-directional mobile robots have to change their trajectory for avoiding obstacles regardless of the size of the obstacles. However, an omni-directional mobile robot having kinematic redundancy can maintain the trajectory while the robot avoids small obstacles. This works deals with the kinematic modeling and motion planning of an omni-directional mobile robot with kinematic redundancy. This robot consists of three wheel mechanisms. Each wheel mechanism is modeled as having four joints, while only three joints are necessary for creating the omni-directional motion. Thus, each chain has one kinematic redundancy. Two types of wheel mechanisms are compared and its kinematic modeling is introduced. Finally, several motion planning algorithms using the kinematic redundancy are investigated. The usefulness of this robot is shown through experiment.
Abstract
Most omni-directional mobile robots have to change their trajectory for avoiding obstacles regardless of the size of the obstacles. However, an omni-directional mobile robot having kinematic redundancy can maintain the trajectory while the robot avoids small obstacles. This works deals with the kinematic modeling and motion planning of an omni-directional mobile robot with kinematic redundancy. This robot consists of three wheel mechanisms. Each wheel mechanism is modeled as having four joints, while only three joints are necessary for creating the omni-directional motion. Thus, each chain has one kinematic redundancy. Two types of wheel mechanisms are compared and its kinematic modeling is introduced. Finally, several motion planning algorithms using the kinematic redundancy are investigated. The usefulness of this robot is shown through experiment.
참고문헌 (10)
- C. Campion, "Structural properties and classification of kinematics and dynamics models of wheeled Mobile Robot", IEEE Trans. on Robot and Automation, 4(2), pp.281~340 (1987)
- B.-J. Yi, "The Kinematics for redundantly actuated omni-directional mobile robots", Journal of Robotic Systems, 19(6), pp.255~267 (2002)
- J. E. M. Salih, "Designing omni-directional mobile robot with mecanum wheel", American Journal of Applied Sciences, 3(5), pp.1831~1835 (2006)
- K.L. Moore, "A six-wheeled omnidiretional autonomous mobile robot", IEEE Control System Magazine, 20(6), pp.53~66 (2000)
- M.D. Berkemeier, "Discrete control for visual servoing the ODIS robot to parking lot lines", in Proc. IEEE Int. Conf. on Robotics and Automation, pp.3149~3154 (2005)
- J.H. Lee, "Command system and motion control for caster-type omnidirectional mobile robot", in Proc. IEEE, 2005, 2714~2720
- T.B. Park, "Optimal design and actuator sizing of redundantly actuated omni-directional mobile robots", in Proc. IEEE Int. Conf. on Robotics and Automation, pp.732~737 (2002)
- K. Tadakuma, "Mechanical Design of Joint Braking and Underactuated Mechanism of "Tri-Star3"; Horizontal Polyarticular Arm Equipped 3-Wheeled Expandable Mobile Robot", in Proc. IEEE, 2006, 4252~4259
- R.A. Freeman, "Dynamic modeling of serial and parallel mechanisms", robotic systems, 1988, 7~27
- K.H. Hunt, "Kinematic Geometry of Mechanisms" (1990), Clarendon Press