임의 성형시간에 잔류진동을 제거할 수 있는 SD성형기
An SD Shaper to Suppress Residual Vibration at an Arbitrarily Specified Duration
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Recently, various input shapers have been introduced to reduce residual vibrations of flexible robots. However, there have been no studies on the design of an input shaper that can suppress residual vibration at an arbitrarily specified duration. In this paper, a novel input shaper called an SD (specified-duration) shaper is proposed for an undamped or underdamped system, which can suppress residual vibration at an arbitrarily given specified duration. If the specified duration is larger than a half period, a positive SD shaper composed of all positive impulses is designed, and if the specified duration is smaller than a half period, a negative SD shaper including a negative impulse is designed. As the specified duration is increased every half period after a half period, the number of impulses of the positive SD shaper is increased one by one, and the robustness of the SD shaper to modeling errors is increased. The performance of the SD shaper is analyzed through simulation studies for an undamped and underdamped second-order systems. The validity of the SD shapers is demonstrated experimentally using an experimental device that can generate container transport motions.
Abstract
Recently, various input shapers have been introduced to reduce residual vibrations of flexible robots. However, there have been no studies on the design of an input shaper that can suppress residual vibration at an arbitrarily specified duration. In this paper, a novel input shaper called an SD (specified-duration) shaper is proposed for an undamped or underdamped system, which can suppress residual vibration at an arbitrarily given specified duration. If the specified duration is larger than a half period, a positive SD shaper composed of all positive impulses is designed, and if the specified duration is smaller than a half period, a negative SD shaper including a negative impulse is designed. As the specified duration is increased every half period after a half period, the number of impulses of the positive SD shaper is increased one by one, and the robustness of the SD shaper to modeling errors is increased. The performance of the SD shaper is analyzed through simulation studies for an undamped and underdamped second-order systems. The validity of the SD shapers is demonstrated experimentally using an experimental device that can generate container transport motions.
참고문헌 (14)
- 이상윤, "교량용 거더 원격 정밀거치 시스템 개념 설계", 로봇학회 논문지, 16(3), pp.199~206 (2021), 한국로봇학회[DOI]
- 강한솔, "로봇 잔류 진동 저감을 위한 모션 가감속 시간 설계 연구", 로봇학회 논문지, 12(3), pp.279~286 (2017), 한국로봇학회
- Weimin Tao, "Residual Vibration Analysis and Suppression for SCARA Robot Arm in Semiconductor Manufacturing", IEEE International Workshop on Intelligent Robots and Systems (IROS) (2006), IEEE
- 우교식, "Linux", RTAI기반의 잔류진동 억제 입력성형 구현, 2009, pp.4(3), 250~256[DOI]
- Otto M. Smith, "Posicast Control of Damped Oscillatory Systems", Proceedings of the IRE, 45(9), pp.1249~1255 (1957), Institute of Electrical and Electronics Engineers (IEEE)
- N. C. Singer, "Preshaping Command Inputs to Reduce System Vibration", Journal of Dynamic Systems, Measurement, and Control, 112(1), pp.76~82 (1990), ASME International[DOI]
- W. E. Singhose, "Command generation for flexible systems", Ph.D, pp.1997
- William Singhose, "Command Shaping for Flexible Systems: A Review of the First 50 Years", International Journal of Precision Engineering and Manufacturing, 10(4), pp.153~168 (2009), 한국정밀공학회
- Chul-Goo Kang, "Impulse Vectors for Input-Shaping Control: A Mathematical Tool to Design and Analyze Input Shapers", IEEE Control Systems, 39(4), pp.40~55 (2019), Institute of Electrical and Electronics Engineers (IEEE)[DOI]
- W. Singhose, "Input shaping for vibration reduction with specified insensitivity to modeling errors", Proc. of Japan-USA Symposium on Flexible Automation, 1, pp.307~313 (1996)
- W. E. Singhose, "Time-Optimal Negative Input Shapers", Journal of Dynamic Systems, Measurement, and Control, 119(2), pp.198~205 (1997), ASME International[DOI]
- Joshua Vaughan, "Robust Negative Input Shapers for Vibration Suppression", Journal of Dynamic Systems, Measurement, and Control, 131(3) (2009), ASME International[DOI]
- Brian Byunghyun Kang, "Specified-duration shapers for suppressing residual vibrations", PLOS ONE, 17(11), pp.e0276669~ (2022), Public Library of Science (PLoS)[DOI]
- W. Kim, "Modeling Analysis for System Parameters of a Vertical Input Shaping Control Apparatus", Asian Control Conference (2019)