통합모델을 활용한 이류와 도시비율이 서울 수도권 지역의 도시열섬강도에 미치는 영향 분석
Analysis of the Effects of Advection and Urban Fraction on Urban Heat Island Intensity using Unified Model for Seoul Metropolitan Area, Korea
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study investigates the impacts of urban land-use fraction and temperature advection on the urban heat island intensity over the Seoul metropolitan area using the UM (Unified Model) with the MORUSES (Met Office Reading Urban Surface Exchange Scheme) during the heat wave over the region from 2 to 8, August 2016. Two simulations are performed with two different land-use type, the urban (urban simulation) and the urban surfaces replaced with grass (rural simulation), in order to calculate the urban heat island intensity defined as the 1.5-m temperature difference between the urban and the rural simulations. The land-use type for the urban simulation is obtained from Korea Ministry of Environment (2007) land-use data after it is converted into the types used in the UM. It is found that the urban heat island intensity over high urban-fraction regions in the metropolitan area is as large as 1oC in daytime and 3.2oC in nighttime, i.e., the effects of urban heat island is much larger for night than day. It is also found that the magnitude of urban heat island intensity increases linearly with urban land-use fraction. Spatially, the estimated the urban heat island intensities are systematically larger in the downwind regions of the metropolitan area than in the upwind area due to the effects of temperature advection. Results of this study indicate that urban surface fraction in the city area and temperature advection play a key role in determining the spatial distribution and magnitude of urban heat island intensity.
Abstract
This study investigates the impacts of urban land-use fraction and temperature advection on the urban heat island intensity over the Seoul metropolitan area using the UM (Unified Model) with the MORUSES (Met Office Reading Urban Surface Exchange Scheme) during the heat wave over the region from 2 to 8, August 2016. Two simulations are performed with two different land-use type, the urban (urban simulation) and the urban surfaces replaced with grass (rural simulation), in order to calculate the urban heat island intensity defined as the 1.5-m temperature difference between the urban and the rural simulations. The land-use type for the urban simulation is obtained from Korea Ministry of Environment (2007) land-use data after it is converted into the types used in the UM. It is found that the urban heat island intensity over high urban-fraction regions in the metropolitan area is as large as 1oC in daytime and 3.2oC in nighttime, i.e., the effects of urban heat island is much larger for night than day. It is also found that the magnitude of urban heat island intensity increases linearly with urban land-use fraction. Spatially, the estimated the urban heat island intensities are systematically larger in the downwind regions of the metropolitan area than in the upwind area due to the effects of temperature advection. Results of this study indicate that urban surface fraction in the city area and temperature advection play a key role in determining the spatial distribution and magnitude of urban heat island intensity.
참고문헌 (30)
- Arnfield, A. J., "Two decades of urban climate research: a review of turbulence, exchanges of energy and water, and the urban heat island", Int. J. Climatol, 23, pp.1~26 (2003)
- Best, M. J., "Representing urban areas within operational numerical weather prediction models", Bound.-Layer Meteor, 114, pp.91~109 (2005)
- M. J. Best, "The Joint UK Land Environment Simulator (JULES), model description – Part 1: Energy and water fluxes", Geoscientific Model Development, 4(3), pp.677~699 (2011), Copernicus GmbH[DOI]
- S. I. Bohnenstengel, "Simulations of the London urban heat island", Quarterly Journal of the Royal Meteorological Society, 137(659), pp.1625~1640 (2011), Wiley[DOI]
- M. Roth, "The integrated WRF", urban modelling system: development, evaluation, and applications to urban environmental problems, 2011, pp.31(2), 273~288[DOI]
- Feng Chen, "WRF simulations of urban heat island under hot-weather synoptic conditions: The case study of Hangzhou City, China", Atmospheric Research, 138, pp.364~377 (2014), Elsevier BV[DOI]
- Davies, T., "A new dynamical core for the Met Office’s global and regional modelling of the atmosphere", Q. J. R. Meteorol. Soc, 131, pp.1759~1782 (2005)
- Edwards, J. M., "Studies with a flexible new radiation code. I: Choosing a configuration for a large-scale model", Q. J. R. Meteorol. Soc, 122, pp.689~719 (1996)
- Grimmond, C. S. B., "Heat storage in urban areas: local-scale observations and evaluation of a simple model", J. Appl. Meteorol, 38, pp.922~940 (1999)
- 홍제우, "자동기상관측소의 국지기후대에 근거한 서울 도시 열섬의 공간 분포", 대기, 23(4), pp.413~424 (2013), 한국기상학회[DOI]
- 홍선옥, "통합모델을 이용한 토지피복변화와 도시 모수화 방안에 따른지상 기온 모의성능 민감도 분석", 대기, 28(4), pp.427~441 (2018), 한국기상학회[DOI]
- Kanda, M., "A simple energy balance model for regular building arrays", Bound.-Layer Meteor, 116, pp.423~443 (2005)
- Kim, Y. -H., "Daily maximum urban heat island intensity in large cities of Korea", Theor. Appl. Climatol, 79, pp.151~164 (2004)
- Kusaka, H., "A simple single-layer urban canopy model for atmospheric models: Comparison with multi-layer and slab models", Bound.-Layer Meteor, 101, pp.329~358 (2001)
- Sang-Hyun Lee, "Statistical and dynamical characteristics of the urban heat island intensity in Seoul", Theoretical and Applied Climatology, 100(1-2), pp.227~237 (2010), Springer Science and Business Media LLC[DOI]
- Lock, A. P., "A new boundary layer mixing scheme. Part I: Scheme description and single-column model tests", Mon. Wea. Rev, 128, pp.3187~3199 (2000)
- Masson, V., "A physically-based scheme for the urban energy budget in atmospheric models", Bound.-Layer Meteor, 94, pp.357~397 (2000)
- Oke, T. R., "The energetic basis of the urban heat island", Q. J. R. Meteorol. Soc, 108, pp.1~24 (1982)
- Oke, T. R., "Urban Climates", pp.526~ (2017), Cambridge University Press
- Oleson, K. W., "An urban parameterization for a global climate model. Part I: formulation and evaluation for Two cities", J. Appl. Meteor. Climatol, 47, pp.1038~1060 (2008)
- 박정재, "위성영상을 이용한 중분류 토지피복도의 제작과정 개선", Spatial Information Research, 15(1), pp.67~80 (2007), 대한공간정보학회
- A. Porson, "Implementation of a new urban energy budget scheme into MetUM. Part II: Validation against observations and model intercomparison", Quarterly Journal of the Royal Meteorological Society, 136(651), pp.1530~1542 (2010), Wiley[DOI]
- A. Porson, "Implementation of a new urban energy budget scheme in the MetUM. Part I: Description and idealized simulations", Quarterly Journal of the Royal Meteorological Society, 136(651), pp.1514~1529 (2010), Wiley[DOI]
- Sailor, D. J., "A review of methods for estimating anthropogenic heat and moisture emissions in the urban environment", Int. J. Climatol, 31, pp.189~199 (2001)
- A description of the advanced research WRF version 3, "Skamarock, W. C.", NCAR, 125~, pp.NCAR Tech. Note NCAR (2008), TN-475+STR
- Jianguo Tan, "The urban heat island and its impact on heat waves and human health in Shanghai", International Journal of Biometeorology, 54(1), pp.75~84 (2010), Springer Science and Business Media LLC[DOI]
- World Urbanization Prospects: The 2014revision, "UNDESA", United Nations Department of Economic and Social Affairs, 27~, pp.Methodology Working Paper No. ESA (2014), P[DOI]
- Unnikrishnan C.K., "Recent changes on land use", land cover over Indian region and its impact on the weather prediction using Unified model, 2016, pp.17(4), 294~300[DOI]
- Webster, S., "Improvements to the representation of orography in the Met Office Unified Model", Q. J. R. Meteorol. Soc, 129, pp.1989~2010 (2003)
- Wilson, D. R., "A microphysically based precipitation scheme for the UK Meteorological Office Unified Model", Q. J. R. Meteorol. Soc, 125, pp.1607~1636 (1999)