큰에디모의 모형을 이용한 높은 레이놀즈 수에서의 사각 기둥 후면의 와열 분석: 풍향과 풍속, 기둥 너비의 영향
Analysis on Vortex Streets Behind a Square Cylinder at High Reynolds Number Using a Large-Eddy Simulation Model: Effects of Wind Direction, Speed, and Cylinder Width
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study investigates turbulent flow around a square cylinder mounted on a flat surface at high Reynolds number using a large-eddy simulation (LES) model, particularly focusing on vortex streets behind the square cylinder. Total 9 simulation cases with different inflow wind directions, inflow wind speeds, and cylinder widths in the x- and y-directions are considered to examine the effects of inflow wind direction, speed, and cylinder widths on turbulent flow and vortex streets. In the control case, the inflow wind parallel to the x-direction has a maximum speed of 5 m s−1 and the width and height of the cylinder are 50 m and 200 m, respectively. In all cases, downdrafts in front of the cylinder and updrafts, wakes, and vortex streets behind the cylinder appear. Low-speed flow below the cylinder height and high-speed flow above it are mixed behind the cylinder, resulting in strong negative vertical turbulent momentum flux at the boundary. Accordingly, the magnitude of the vertical turbulent momentum flux is the largest near the cylinder top. In the case of an inflow wind direction of 45o, the height of the boundary is lower than in other cases. As the inflow wind speed increases, the magnitude of the peak in the vertical profile of mean turbulent momentum flux increases due to the increase in speed difference between the low-speed and high-speed flows. As the cylinder width in the y-direction increases, the height of the boundary increases due to the enhanced updrafts near the top of the cylinder. In addition, the magnitude of the peak of the mean turbulent momentum flux increases because the low-speed flow region expands. Spectral analysis shows that the non-dimensional vortex generation frequency in the control case is 0.2 and that the cylinder width in the y-direction and the inflow wind direction affect the non-dimensional vortex generation frequency. The non-dimensional vortex generation frequency increases as the projected width of the cylinder normal to the inflow direction increases.
Abstract
This study investigates turbulent flow around a square cylinder mounted on a flat surface at high Reynolds number using a large-eddy simulation (LES) model, particularly focusing on vortex streets behind the square cylinder. Total 9 simulation cases with different inflow wind directions, inflow wind speeds, and cylinder widths in the x- and y-directions are considered to examine the effects of inflow wind direction, speed, and cylinder widths on turbulent flow and vortex streets. In the control case, the inflow wind parallel to the x-direction has a maximum speed of 5 m s−1 and the width and height of the cylinder are 50 m and 200 m, respectively. In all cases, downdrafts in front of the cylinder and updrafts, wakes, and vortex streets behind the cylinder appear. Low-speed flow below the cylinder height and high-speed flow above it are mixed behind the cylinder, resulting in strong negative vertical turbulent momentum flux at the boundary. Accordingly, the magnitude of the vertical turbulent momentum flux is the largest near the cylinder top. In the case of an inflow wind direction of 45o, the height of the boundary is lower than in other cases. As the inflow wind speed increases, the magnitude of the peak in the vertical profile of mean turbulent momentum flux increases due to the increase in speed difference between the low-speed and high-speed flows. As the cylinder width in the y-direction increases, the height of the boundary increases due to the enhanced updrafts near the top of the cylinder. In addition, the magnitude of the peak of the mean turbulent momentum flux increases because the low-speed flow region expands. Spectral analysis shows that the non-dimensional vortex generation frequency in the control case is 0.2 and that the cylinder width in the y-direction and the inflow wind direction affect the non-dimensional vortex generation frequency. The non-dimensional vortex generation frequency increases as the projected width of the cylinder normal to the inflow direction increases.
참고문헌 (18)
- J. A. Bourgeois, "Alternating half-loop shedding in the turbulent wake of a finite surface-mounted square cylinder with a thin boundary layer", Physics of Fluids, 23(9), pp.095101~ (2011), AIP Publishing[DOI]
- Breuer, M., "Large eddy simulation of the subcritical flow past a circular cylinder: Numerical and modeling aspects", Int. J. Numer. Meth. Fl., 28, pp.1281~1302 (1998)
- Deardorff, J. W., "Stratocumulus-capped mixed layers derived from a three-dimensional model", Bound.-Layer Meteor., 18, pp.495~527 (1980)
- Beom-Soon Han, "Large-eddy simulation of vortex streets and pollutant dispersion behind high-rise buildings", Quarterly Journal of the Royal Meteorological Society, 143(708), pp.2714~2726 (2017), Wiley[DOI]
- S. Ul Islam, "Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method", Journal of Mechanical Science and Technology, 26(4), pp.1027~1041 (2012), 대한기계학회
- SINIŠA KRAJNOVIĆ, "Flow around a tall finite cylinder explored by large eddy simulation", Journal of Fluid Mechanics, 676, pp.294~317 (2011), Cambridge University Press (CUP)[DOI]
- Lienhard, J. H., "Synopsis of Lift, Drag, and Vortex Frequency Data for Rigid Circular Cylinders", Technical Extension Service, 32~ (1966)
- B. Maronga, "The Parallelized Large-Eddy Simulation Model (PALM) version 4.0 for atmospheric and oceanic flows: model formulation, recent developments, and future perspectives", Geoscientific Model Development Discussions, 8(2), pp.1539~1637 (2015), Copernicus GmbH[DOI]
- Norberg, C., "Fluctuating lift on a circular cylinder:Review and new measurements", J. Fluids Struct., 17, pp.57~96 (2003)
- Guillermo Palau-Salvador, "Large Eddy Simulations and Experiments of Flow Around Finite-Height Cylinders", Flow, Turbulence and Combustion, 84(2), pp.239~275 (2010), Springer Nature[DOI]
- P. Sattari, "On the vortex dynamics in the wake of a finite surface-mounted square cylinder", Experiments in Fluids, 52(5), pp.1149~1167 (2012), Springer Nature[DOI]
- Sohankar, A., "Numerical simulation of unsteady low-Reynolds number flow around rectangular cylinders at incidence", J. Wind Eng. Ind. Aerod., 69, pp.189~201 (1997)
- Sumner, D., "Wake structure of a finite circular cylinder of small aspect ratio", Exp. Fluids, 37, pp.720~730 (2004)
- D. Sumner, "Flow above the free end of a surface-mounted finite-height circular cylinder: A review", Journal of Fluids and Structures, 43, pp.41~63 (2013), Elsevier BV[DOI]
- T. Uffinger, "Experimental and numerical investigations of the flow around three different wall-mounted cylinder geometries of finite length", Journal of Wind Engineering and Industrial Aerodynamics, 119, pp.13~27 (2013), Elsevier BV[DOI]
- "Flow structure around a finite-length square prism" (2004)[URL]
- Wang, H. F., "The finite-length square cylinder near wake", J. Fluid Mech., 638, pp.453~490 (2009)
- Wicker, L. J., "Time-splitting methods for elastic models using forward time schemes", Mon. Wea. Rev., 130, pp.2088~2097 (2002)