Three Dimensional Analysis of Primary Maxillary Central and Lateral Anterior Zirconia Crown
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
본 연구는 전치부 지르코니아 전장관을 위한 적정 치아 삭제량을 조사하기 위해 3차원 스캐너를 이용, 지르코니아와 다른유치 전장관들의 크기와 형태를 분석하였다. 상악 좌측 유중절치, 유측절치 지르코니아 전장관과 금속관의 내/외면, 레진관의 외면을 스캔하여, 근원심경이 유사한 세종류의 전장관을 한 군으로 만들어 분석하였다. 외면에서 모든 중절치, 1번 측절치 지르코니아 전장관이 같은 군의 전장관 중 가장 큰 순설경을 나타냈다. 내면에서 지르코니아 전장관은 금속관에 비해 근원심경 0.7-1.0 mm, 치관길이는 1 mm 가량 작았으며, 순설경은 중절치에서는 더 컸으나 측절치에서는 더 작았다. 비교결과, 지르코니아 전장관은 절단면 2.5-3.0mm, 근원심 1.5-2 mm, 순면 0.5-1 mm, 설면결절을 장축에 평행하게삭제 후 측절치에서만 0.5 mm 설면삭제를 시행하는 것을 제안할 수 있다.
Abstract
This study was performed to compare the shape and dimension of anterior zirconia crowns to other pediatric crowns using a three-dimensional scanner to investigate adequate amount of tooth preparation. Primary central and lateral anterior zirconia crowns, stainless steel crowns and celluloid strip crowns were scanned by a three-dimensional scanner. Outer and inner surfaces of zirconia and stainless steel crowns, and outer surface of celluloid strip crowns were analyzed. In outer scanned images, all sizes of central and lateral size 1 zirconia crown had the largest labiolingual diameter among the three crowns. In inner scanned images, zirconia crown’s mesiodistal diameter was 0.7-1.0 mm smaller and crown length was approximately 1 mm shorter than those of stainless steel crowns. Zirconia crown’s labiolingual diameter was larger in central crowns whereas it was smaller in lateral crowns than that of stainless steel crowns. Recommended preparation required for zirconia crown is incisal 2.5-3.0 mm, mesiodistal 1.5-2.0 mm, labial 0.5-1.0 mm. Cingulum should be trimmed parallel to the long axis. No more lingual reduction is needed in central incisors whereas additional 0.5 mm reduction is suggested in lateral incisors.
참고문헌 (17)
- Oueis H, "Use of anterior veneered stainless steel crowns by pediatric dentists", Pediatr Dent, 32, pp.413~416 (2010)
- Ram D, "Clinical performance of resinbonded composite strip crowns in primary incisors: a retrospective study", Int J Paediatr Dent, 16, pp.49~54 (2006)
- Waggoner WF, "Restoring Primary Anterior Teeth:Updated for 2014", Pediatr Dent, 37, pp.163~185 (2015)
- Karaca S, "Primary zirconia crown restorations for children with early childhood caries", Acta Stomatol Croat, 47, pp.64~71 (2013)
- Miyazaki T, "Current status of zirconia restoration", J Prosthodont Res, 57, pp.236~261 (2013)
- Chuchai Anunmana, "Gap comparison between single crown and three-unit bridge zirconia substructures", The Journal of Advanced of Prosthodontics, 6(4), pp.253~258 (2014), 대한치과보철학회[DOI]
- Korean Acad Pediatr Dent, "Dentistry for the child and adolescent", pp.389~392 (2014), YENANG INC
- "Technical Guide Instructions for Use and GeneralInformation"[URL]
- Moorrees CF, "Mesiodistal crown diameters of deciduous and permanent teeth", J Dent Res, 36, pp.39~47 (1957)
- Lee JH, "Morpholgy of stainless steel crowns for the first primary molar using threedimensional scanner", Seoul National University, ~ (2013)
- 이종범, "3차원 스캐너를 이용한 상악 제1유구 치관의 크기와 형태에 관한 연구", 대한소아치과학회지, 33(4), pp.643~652 (2006), 대한소아치과학회
- "Scanners overview"[URL]
- Sousa MV, "Accuracy and reproducibility of 3-dimensional digital model measurements", Am J Orthod Dentofacial Orthop, 142, pp.269~273 (2012)
- Lee GT, "Accuracy of digitized dental model made from white light scanner according to different scanning method", Korea University, ~ (2013)
- 백병주, "유치의 치아크기에 관한 연구", 대한소아치과학회지, 29(3), pp.23~ (2002), 대한소아치과학회
- 한은옥, "유치용 수종 기성금속관의 형태에 대한 계측학적 연구", 대한소아치과학회지, 39(2), pp.145~152 (2012), 대한소아치과학회[DOI]
- Dean JA, "McDonald and Avery’s Dentistry for the Child and adolescent", pp.46~ (2010), Elsevier Inc