본문 바로가기
KERD
논문KCI 등재

지르코니아 기성관에 컴포머와 레진 시멘트로 접착한 교정 밴드의 결합력

Bond Strength of Band on Zirconia Crown with Compomer and Resin Cement

김지훈|이종형|이한길|박찬희
대한소아치과학회 (The Korean Academy Of Pediatric Dentistry)|2019.05|대한소아치과학회지 (Journal of the Korean academy of pediatric dentistry)|제46권 제2호|pp. 127-134|DOI https://doi.org/10.5933/JKAPD.2019.46.2.127

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

Bond strengthOrthodontic bandPreformed zirconia crown
주제분류치의학

초록

이 연구의 목적은 지르코니아 기성관에 대한 교정용 밴드의 접착제로서 컴포머 시멘트와 레진 시멘트를 평가하고자 하였다. 총 30개의 시편을 준비하였다. 상악 우측 제 2유구치의 스테인리스 스틸 기성관에 컴포머 시멘트로 교정용 밴드를 접착한 Ⅰ군과지르코니아 기성관에 컴포머 시멘트로 밴드를 접착한 Ⅱ군, 지르코니아 기성관에 레진 시멘트로 밴드를 접착한 Ⅲ군으로 나누었고 밴드의 결합력을 측정하기 위해 인장력을 가하였다. Ⅰ군, Ⅱ군과 Ⅲ군의 결합력의 평균값은 각각 0.79 MPa, 1.09 MPa 그리고 1.56 MPa였다. Ⅱ군이 Ⅰ군보다 유의하게 높은 결합력을보였고, Ⅱ군과 Ⅲ군 의 결합력에는 유의한 차이가 없었다. 컴포머 시멘트와 기능성 단량체를 포함한 레진 시멘트는 유구치 지르코니아 기성관에 대한 교정용 밴드의 시멘트로서 양호한 결합력을 보였다.

Abstract

The aim of this study was to evaluate the compomer cement and resin cement as an orthodontic band cement on zirconia crown. A total of 30 specimens were prepared. Preformed stainless steel crowns and zirconia crowns of upper right second primary molar were used. Orthodontic bands were cemented on stainless steel crowns (Group Ⅰ, n = 10) and zirconia crowns (Group Ⅱ, n = 10) with compomer cement. The other bands were cemented on zirconia crowns with resin cement (Group Ⅲ, n = 10). The tensile loads were applied to band to measure the bond strength. The mean of bond strengths of group Ⅰ, Ⅱ and Ⅲ were 0.79 MPa, 1.09 MPa and 1.56 MPa respectively. Bond strength of group Ⅱ is significantly higher than group Ⅰ. There was no significant difference between group Ⅱ and Ⅲ. Compomer cement and resin cement containing functional monomers showed favorable bond strength of orthodontic bands.

참고문헌 (32)

  1. Brown D, "Orthodontic band cements", Br J Orthod, 16, pp.127~131 (1989)
  2. Seeholzer HW, "Banding with a glass ionomer cement", J Clin Orthod, 22, pp.165~169 (1988)
  3. Aggarwal M, "A comparison of shear-peel band strengths of 5 orthodontic cements", Angle Orthod, 70, pp.308~316 (2000)
  4. Mennemeyer VA, "Bonding of hybrid ionomers and resin cements to modified orthodontic band materials", Am J Orthod Dentofacial Orthop, 115, pp.143~147 (1999)
  5. Bawazir OA, "Effect of sandblasting and type of cement on the bond strength of molar bands on stainless steel crowns", J Dent Child(Chic), 82, pp.64~69 (2015)
  6. Beemer RL, "Orthodontic band retention on primary molar stainless steel crowns", Pediatr Dent, 15, pp.408~413 (1993)
  7. Youn YA, "Effect of surface treatment and type of cement on the retentive strength of orthodontic bands on gold alloy crowns", Am J Orthod Dentofacial Orthop, 132, pp.728~ (2007)
  8. Afshar H, "Comparison of primary molar crown dimensions with stainless steel crowns in a sample of Iranian children", J Dent Res Dent Clin Dent Prospects, 9, pp.86~91 (2015)
  9. Mizrahi E, "Retention of the conventional orthodontic band", Br J Orthod, 4, pp.133~137 (1977)
  10. Uysal T, "Microleakage of orthodontic band cement at the cement-enamel and cement-band interfaces", Am J Orthod Dentofacial Orthop, 137, pp.534~539 (2010)
  11. Chung CK, "Fluoride release and cariostatic ability of a compomer and a resin-modified glass ionomer cement used for orthodontic bonding", J Dent, 26, pp.533~538 (1998)
  12. Özcan M, "Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis", J Adhes Dent, 17, pp.7~26 (2015)
  13. 이정환, "Resin bonding of metal brackets to glazed zirconia with a porcelain primer", 대한치과교정학회지, 45(6), pp.299~307 (2015), 대한치과교정학회
  14. Papia E, "Bonding between oxide ceramics and adhesive cement systems : a systematic review", J Biomed Mater Res B Appl Biomater, 102, pp.395~413 (2014)
  15. Kern M, "Bonding to zirconia ceramic : Adhesion methods and their durability", Dent Mater, 14, pp.64~71 (1998)
  16. Kim J, "The effect of various types of mechanical and chemical preconditioning on the shear bond strength of orthodontic brackets on zirconia restorations", Scanning, 2017, pp.6243179~ (2017)
  17. Lung CY, "The effect of silica-coating by sol-gel process on resin-zirconia bonding", Dent Mater J, 32, pp.165~172 (2013)
  18. Yang B, "Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin", Dent Mater, 26, pp.44~50 (2010)
  19. de Oyagüe RC, "Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic", Dent Mater, 25, pp.172~179 (2009)
  20. Della Bona A, "Effect of surface treatments on the bond strength of a zirconia-reinforced ceramic to composite resin", Braz Oral Res, 21, pp.10~15 (2007)
  21. Kern M, "Bonding to glass infiltrated alumina ceramic : adhesive methods and their durability", J Prosthet Dent, 73, pp.240~249 (1995)
  22. Ozcan M, "A brief history and current status of metal-and ceramic surface-conditioning concepts for resin bonding in dentistry", Quintessence Int, 29, pp.713~724 (1998)
  23. Zhang Y, "Fatigue and damage tolerance of Y-TZP ceramics in layered biomechanical systems", J Biomed Mater Res B Appl Biomater, 71, pp.166~171 (2004)
  24. Uo M, "Effect of surface condition of dental zirconia ceramic(Denzir)on bonding", Dent Mater J, 25, pp.626~631 (2006)
  25. Ogaard B, "Orthodontic appliances and enamel demineralization. Part 1. Lesion development", Am J Orthod Dentofacial Orthop, 94, pp.68~73 (1988)
  26. Dastjerdie EV, "Strength of attachment between band and glass ionomer cement", Aust Orthod J, 26, pp.149~152 (2010)
  27. Norris DS, "Retention of orthodontic bands with new fluoride-releasing cements", Am J Orthod, 89, pp.206~211 (1986)
  28. Millett D, "Adhesives for fixed orthodontic bands. A systematic review", Angle Orthod, 79, pp.193~199 (2009)
  29. Parisay I, "Evaluation of retentive strength of four luting cements with stainless steel crowns in primary molars : An in vitro study", Dent Res J(Isfahan), 15, pp.201~207 (2018)
  30. Yilmaz Y, "Retentive force and microleakage of stainless steel crowns cemented with three different luting agents", Dent Mater J, 23, pp.577~584 (2004)
  31. Heravi F, "Retentive strength of orthodontic bands cemented with amorphous calcium phosphate-modified glass ionomer cement : an invitro study", J Dent(Tehran), 14, pp.13~20 (2017)
  32. Reddy R, "A comparative study of retentive strengths of zinc phosphate, polycarboxylate and glass ionomer cements with stainless steel crowns-an in vitro study", J Indian Soc Pedod Prev Dent, 16, pp.9~11 (1998)

관련 논문AI추천

수종의 밴드 접착 시멘트의 물성에 대한 비교 연구김기백, 김선미, 양규호, 최남기대한소아치과학회 · 대한소아치과학회지2009 · 제36권 제3호지르코니아 세라믹과 레진 시멘트의 결합강도김지혜, 박주미, 복원미, 송광엽, 장문숙, 조석규대한치과보철학회 · 대한치과보철학회지2005 · 제43권 제4호지르코니아의 새로운 표면처리 방법이 레진 시멘트와의 전단결합강도에 미치는 영향배지현, 조원탁, 최재원한국디지털정책학회 · 디지털융복합연구2021 · 제19권 제3호표면처리방법이 지르코니아와 레진시멘트 간의 전단결합강도에 미치는 영향김경수, 김유리, 김정미대한턱관절교합학회 · 구강회복응용과학지2013 · 제29권 제1호지르코니아 세라믹의 표면처리에 따른 치과용 접착제의 전단결합강도김지혜, 박주미, 서재민, 송광엽, 안승근대한치과보철학회 · 대한치과보철학회지2013 · 제51권 제2호수종의 교정용 브라켓 접착 레진의 전단 강도 평가한미란, 함영준대한소아치과학회 · 대한소아치과학회지2022 · 제49권 제3호

이 간행물의 다른 논문 (12건)

Susceptibility of Mutans streptococci in the Planktonic and Biofilm State to Erythrosine서현우, 박호원, 이주현, 이시영, 공정은pp. 135-138Evaluation of Midpalatal Suture Maturation using Cone-Beam Computed Tomography in Children and Adolescents마연주, 이연주pp. 139-146상악 측절치 결손이 어린이 안면골격과 치열궁 형태에 미치는 영향김지연, 남시연, 신종현, 김신, 정태성pp. 147-157Effect of Saliva Contamination Stage and Different Decontamination Procedures on Bonding Strength of Resin-Modified Glass Ionomer이주현, 고한호, 서현우, 박호원pp. 158-164새로 개발된 8세대 접착제의 적용 방법에 따른 유치에서의 전단결합강도와 미세누출이주현, 서현우, 유원정, 박호원pp. 165-172
원문 보기