본문 바로가기
KERD
논문KCI 등재

콤퍼머의 NaOH 용액 내에서의 화학적 분해

Chemical degradation of various compomers in NaOH

1

조회

0

다운로드

1

인용

0

참고문헌

키워드

주제분류치의학

초록

이상적인 수복재료는 치아의 저작기능과 심미성을 회복할 수 있어야 하며 동시에 생체 적합성과 구강 내 환경변화에 대한 내구성을 가지고 있어야 한다. 그러나 수복물이 장기간 구강 내 환경에 노출되면 수복물 표면의 마모와 변색 및 수복물 자체의 파괴가 발생될 수 있다. 콤포머도 복합 레진처럼 낮은 마모 저항성을 주요한 단점으로 지적할 수 있다. 본 연구에서는 현재 유치 수복에 많이 사용되고 있는 Dyract (Dentsply, USA), Elan(Kerr, USA), F-2000(3M, USA)의 3종의 콤포머(polyacid modified resin composites)를 알칼리성 용액(0.1N NaOH)에 보관하였을 때 각 제품의 무게손실, 분해층 깊이 및 시편내에서 용출된 Si, Al과 Ba의 농도를 평가하여 제품간의 분해저항성을 평가하고 비교를 하고자 하였다. 각 제품 당 6개의 시편을 제작하여 무게 측정을 한 후, 0.1N NaOH용액, 3㎖에 저장하여 60℃에서 보관하였다. 2주후 제거하여 1.23% HCl로 2시간동안 중화하고 증류수로 세척한 후 60℃에서 건조하였다. 분해저항성은 무게손실, 분해층 깊이 및 시편내의 Si, Al과 Ba의 농도 변화를 근거로 평가하여 다음과 같은 결과를 얻었다. 1.각 제품의 무게 손실량은 1.43%~2.14%까지 다양하였으며 제품 간에 유의한 차이는 없었다. 2.각 제품의 표면하 분해층 깊이는 182.92㎛~227.70㎛였으며 제품 간에 유의한 차이는 없었다. 3.각 제품으로부터 용출된 Si와 Al양은 각 제품마다 유의한 차이가 있었으며(p<0.05), Si는 Dyract에서 Al은 F-2000에서 가장 많은 양이 방출되었다. 용출된 Ba양은 각 제품마다 유의한 차이가 없었다. 4. 무게 손실량과 표면하 분해층 깊이 사이의 상관 관계에서 비교적 높은 상관관계를 보였다(r=0.64, p<0.05). 5. 주사전자현미경 관찰시 0.1N NaOH용액에 보관한 후 콤포머기질과 필러사이의 결합의 파괴를 관찰할 수 있었으며, 기질이 소실되어 필러입자가 두드러진 양상을 보였다. 또한 필러입자의 표면은 분해에 의해 탈회된 모습을 보였다.

Abstract

The aims of this study was to evaluate the resistance to degradation of three commercial compomers in an alkaline solution. Dyract(Dentsply), Elan(Kerr) and F-2000(3M) polyacid modified resin composites(compomers) were used in this study. The resistance to degradation was evaluated on the basis of mass loss(%), degradation depth(㎛) and Si, Al, Ba loss(ppm). The results were as follows : 1. The mass loss of each brand was 1.42%~2.14% and there was no statistically significant difference of mass loss among Dyract, F2000 and Elan, 2. The degradation layer depth of each brand was 182.92~227.7㎛ and there was on statistically significant difference of degradation layer depth among Dyract, F2000 and Elan, 3. There were statistically significant difference of Si-loss and Al-loss among three compomers (p<0.05). Si loss was the highest value in Dyract and Al loss was the highest value in F2000. 4. There was statistically significant correlation between mass loss and degradation layer depth (r=0.60, p<0.05). 5. In SEM finding, there was destruction of compomer matrix-filler interface in post-exposure specimen to NaOH solution. As the matrix decreased, the filler particles distinguished and the periphery of the filler particles were appeared whitish color due to degradation.

참고문헌 (32)

  1. "Clinical evaluation of compomer in primary teeth : 1-year results", 128(8), pp.1088~1096 (1997)
  2. "Durability of a polyacid-modified composite resin(compomer)in primary molars", 55, pp.255~259 (1997)
  3. "Properties of resin-modified glass-ionomer restorative materials and two polyacid-modified resin composite materials", 27, pp.203~209 (1996)
  4. "Influence of light irradiation on the volumetric change of polyacid-modified resin composites", 27, pp.149~153 (1999)
  5. "Microleakage of Class V resin-modifies glass ionomer and compomer restorations", 81, pp.610~661 (1999)
  6. "Effect of storage media on the fluoride release and surface microhardness of four polyacid-modified composite resins("compomers").", 15, pp.196~201 (1999)
  7. "Dentin bond strength of fluoride-releasing materials", 7, pp.252~4 (1994)
  8. "Comparaive study of the physical properties of a polyacid-modified glass ionomer cement", 15, pp.21~32 (1999)
  9. "Clinical evaluation of a polyacid-modified resin composite(compomer) in Class II restorations of primary teeth : a Two-year follow-up study", 21, pp.231~234 (1999)
  10. "Relative solubilities of hybrid ionomers and compomers by acid impingement", 26, pp.786~790 (1999)
  11. "Properties of resin-modified glass-ionomer restorative materials and two polyacid-modified resin composite materials", 27, pp.203~209 (1996)
  12. "Clinical evaluation of a polyacid-modified resin composite(compomer).", 23, pp.77~80 (1998)
  13. "The influence fo finishing time on the marginal seal of a resin-modified glass-ionomer and polyacid-modified resin composite", 26, pp.48~52 (1999)
  14. "Fluoride release from glass-ionomer and compomer restorative materials : 6-month data", 26, pp.255~259 (1998)
  15. "Surface and subsurface damage of three composite resins" (1990)
  16. "Release fluoride and other elements from light cured glass ionomers in neutral and acidic conditions", 72, pp.1257~1262 (1993)
  17. "Filler leachability during water storage of six composite materials", pp.82~88 (1990)
  18. "Clinical evaluation of composite resin restorations in primary molars", pp.603~
  19. "Microhardness and surface topography of a composite resin cement after water storage", 11, pp.21~26 (1998)
  20. "Surface pH of composite resins in water" (1992)
  21. "Subsurface damage and related phenomena in three restorative resins" (1991)
  22. "Subsurface damage layer of in vivo worn dental composite restoration"
  23. "Influence of oral fluid on composite resin and glass-ionomer cement"
  24. "Hydrolytic degradation of dental composites", 855 (1996)
  25. "Composite restorations for primary molars:two year results", 7, pp.96~103 (1985)
  26. "Observation on a composite resin for Class II restoration:Three-year report", 30, pp.891~ (1973)
  27. "Rate of elution of leachable components from composite", 6, pp.282~287 (1990)
  28. "Degradation of glass filler in experimental composites", 60, pp.1867~1875 (1981)
  29. "Leaking of fillers in dental composites", 62, pp.126~130 (1983)
  30. "Hydrolytic degradation of dental composite", pp.1248~1254 (1984)
  31. "A clinicla evaluation of duract light cured compomer restorative", 2205 (1996)
  32. "Clinical performance of a new compomer restorative in pedeatric dentistry" (1994)

관련 논문AI추천

이 간행물의 다른 논문 (23건)