Preliminary assessment of recycling Malaysia’s Electric Arc Furnace (EAF) steel slag waste as one of raw materials for geopolymer ceramic product
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This research work investigated the suitability of electric arc furnace (EAF) slag as one of raw materials for geopolymerceramic product. Two sets of different body formulations were used; EAF slag with and without presence of China clay wereprepared in alkaline medium. In addition, this work also studied the effect of varying curing temperature on the propertiesof EAF slag waste-based geopolymer. The chemical and mineralogical of this geopolymer are characterized by X-RayDiffraction (XRD), X-Ray Fluorescence (XRF) and Fourier Transfer Infrared Spectroscopy (FTIR). The physical propertiesincluded water absorption, apparent porosity, and bulk density are well reported where phase analysis and functional groupspresent in the geopolymer supported the observations. Furthermore, the compressive strength obtained was in line with theresult observed in physical properties.
Abstract
This research work investigated the suitability of electric arc furnace (EAF) slag as one of raw materials for geopolymerceramic product. Two sets of different body formulations were used; EAF slag with and without presence of China clay wereprepared in alkaline medium. In addition, this work also studied the effect of varying curing temperature on the propertiesof EAF slag waste-based geopolymer. The chemical and mineralogical of this geopolymer are characterized by X-RayDiffraction (XRD), X-Ray Fluorescence (XRF) and Fourier Transfer Infrared Spectroscopy (FTIR). The physical propertiesincluded water absorption, apparent porosity, and bulk density are well reported where phase analysis and functional groupspresent in the geopolymer supported the observations. Furthermore, the compressive strength obtained was in line with theresult observed in physical properties.
참고문헌 (40)
- D. Gabaldón-Estevan, , J. Clean. Prod, 70, pp.242~250 (2014)
- S. Ghosh, , Ceram. Int, 28(4), pp.393~400 (2002)
- E. Karamanova, , J. Eur. Ceram. Soc, 31(6), pp.989~998 (2011)
- Z. Bayer Ozturk, , Ceram. Int, 41(9), pp.12020~12026 (2015)
- S. R. Bragança, , Waste Manag. Res, 24(1), pp.60~66 (2006)
- V. Karayannis, , J. Build. Eng, 14, pp.1~6 (2017)
- R. Sokolar, , Ceram. Int, 37(7), pp.2879~2885 (2011)
- N. U. Kockal, , Boletín La Soc. Española Cerámicay Vidr, 51(5), pp.297~304 (2012)
- N. U. Kockal, , Ceram. Int, 41(10), pp.14529~14536 (2015)
- M.M. Jordán, , Appl. Clay Sci, 30(3-4), pp.219~224 (2005)
- I. Merino, , Waste Manag, 27(12), pp.1829~1844 (2007)
- M. Montero, , Appl. Clay Sci, 43(2), pp.186~189 (2009)
- H. Badiee, , Adv. Appl. Ceram, 107(2), pp.111~115 (2008)
- R. Sarkar, , Bull. Mater. Sci, 33(3), pp.293~298 (2010)
- P. -T. Teo, , Waste Manag, 34(12), pp.2697~2708 (2014)
- P. Ter Teo, , J. Clean. Prod, 241, pp.118144~ (2019)
- P. Ter Teo, , Metals(Basel), 10(10), pp.1347~ (2020)
- H. Fraser, "Ceramic Faults and Their Remedies" (1986), A&C Black Ltd
- C. Fernández Pereira, , Fuel, 88(7), pp.1185~1193 (2009)
- Z. Sun, , Constr. Build. Mater, 49, pp.281~287 (2013)
- S. K. Amin, , Constr. Build. Mater, 157, pp.610~620 (2017)
- A. Graytee, , Ceram. Int, 44(7), pp.8216~8222 (2018)
- Yoorim Rho, "Characterization of metakaolin-based lightweight geopolymers with various foaming agents", Journal of Ceramic Processing Research, 21, pp.74~80 (2020), 청정에너지연구소[DOI]
- N. M. Piatak, , Appl. Geochemistry, 57, pp.236~266 (2015)
- 손세구, "Properties of the Alumino-Silicate Geopolymer using Mine Tailing and Granulated Slag", Journal of Ceramic Processing Research, 14(5), pp.591~594 (2013), 청정에너지연구소[DOI]
- Hee Seob Lim, "Mechanical properties and radiation shielding performance in concrete with electric arc furnace oxidizing slag aggregate", Journal of Ceramic Processing Research, 20(4), pp.363~371 (2019), 청정에너지연구소[DOI]
- S. Sorlini, , J. Hazard. Mater, 209-210, pp.84~91 (2012)
- H. Madani, , Constr. Build. Mater, 247, pp.118441~ (2020)
- Z. Yunsheng, , J. Hazard. Mater, 143(1-2), pp.206~213 (2007)
- K. A. Komnitsas, , Procedia Eng, 21, pp.1023~1032 (2011)
- A. Dakhane, , Appl. Spectrosc, 71(8), pp.1795~1807 (2017)
- C. L. Hwang, , Constr. Build. Mater, 101, pp.1~9 (2015)
- S. O. Sore, , Constr. Build. Mater, 124, pp.301~311 (2016)
- A. G. San Cristóbal, , Appl. Clay Sci, 49(3), pp.239~246 (2010)
- J.G. van Jaarsveld, , Chem. Eng. J, 89(1-3), pp.63~73 (2002)
- M. M. A. B. Abdullah, "Cem. Based Mater" (2018), InTech
- S. Andini, , Waste Manag, 28(2), pp.416~423 (2008)
- C. Ferone, , Appl. Clay Sci, 107, pp.195~204 (2015)
- K. Traven, , Ceram. Int, 45(17), pp.22632~22641 (2019)
- X. Huang, , Mater. Res. Innov, 19, pp.S10-413~S10-419 (2015)