본문 바로가기
KERD
논문KCI 등재

Characteristics of porous B4C ceramic fabricated by the microwave sintering technique

Xiaogang Lu|Yunbo Chen|Lingli Zuo|Chuan Sun|Yunkai Li
청정에너지연구소 (Clean-Energy Research Institute)|2021.06|Journal of Ceramic Processing Research|제22권 제3호|pp. 340-344|DOI 10.36410/jcpr.2021.22.3.340

2

조회

0

다운로드

8

인용

0

참고문헌

키워드

Mechanical propertyMicrostructurePorous ceramicBoron carbideMicrowave sintering
주제분류재료공학

초록

Porous B4C ceramic was produced through microwave sintering technique by using pure boron carbide powder. A thermalinsulation container, of our own design, was adopted during sintering process to reduce the heat loss. The effects of the relativedensity of green body on the porosity, mechanical property and microstructure of the as prepared samples were investigated. The application of microwave sintering technique was helpful to the preparation of the porous B4C ceramic.

Abstract

Porous B4C ceramic was produced through microwave sintering technique by using pure boron carbide powder. A thermalinsulation container, of our own design, was adopted during sintering process to reduce the heat loss. The effects of the relativedensity of green body on the porosity, mechanical property and microstructure of the as prepared samples were investigated. The application of microwave sintering technique was helpful to the preparation of the porous B4C ceramic.

참고문헌 (50)

  1. W. Zhang, , Prog. Mater. Sci, 116, pp.100718~ (2021)
  2. W. Zhang, , Adv. Appl. Ceram, 118(4), pp.222~239 (2019)
  3. G. S. Samy, , Measurement, 103, pp.1~9 (2017)
  4. D. Davtyan, , J. Mater. Res. Technol, 8, pp.5823~5832 (2019)
  5. Hamed Roghani, "Effect of milling parameters on the phase transformations and morphology changes of B4C-SiC nanocomposite powder in situ synthesized by MAVCS method", Journal of Ceramic Processing Research, 17(3), pp.170~175 (2016), 청정에너지연구소[DOI]
  6. L. Nikzad, "High-energy ball milling of B-C-Ti mixtures for the fabrication of B4C and TiB2 nanocomposite powder", Journal of Ceramic Processing Research, 13(5), pp.590~594 (2012), 청정에너지연구소[DOI]
  7. W. Zhu, , Mater. Rep, 30(27), pp.478~482 (2016)
  8. R. Ambigai, , Aust. J. Mech. Eng, 17(2), pp.53~63 (2019)
  9. M. H. Shojaeefard, , Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl, 232(8), pp.1~15 (2016)
  10. Y. T. Yao, , Mater. Maunf. Processes, 31(10), pp.1286~1291 (2016)
  11. P. Larsson, , J. Mater. Sci, 35(14), pp.3433~3440 (2000)
  12. T. Murthy, , Ceram. -Silik, 62(1), pp.15~30 (2018)
  13. C. L. Cramer, , Mater. Des, 180, pp.107956~ (2019)
  14. A. Ravanan, , Mater. Today : Proc, 16(2), pp.374~383 (2019)
  15. Y. T. Yao, , J. Mater. Sci. Technol, 30(7), pp.661~665 (2014)
  16. X. G. Huang, , Mater. Des, 186, pp.108323~ (2020)
  17. I. Sudhakar, , Def. Technol, 11(1), pp.10~17 (2015)
  18. Y. N. Zan, , Mater. Sci. Eng., A., 773, pp.138840~ (2020)
  19. C. L. Cramer, , Mater. Des, 180, pp.107956~ (2019)
  20. L. Zhang, , Ceram. Int, 44(3), pp.3048~3055 (2018)
  21. S. Karabulut, , Composites, Part B, 101, pp.87~98 (2016)
  22. H. S. Chen, , Mater. Des, 94, pp.360~367 (2016)
  23. M. Tayebi, , J. Alloys Compd, 809, pp.151753~ (2019)
  24. Z. L. Chao, , Ceram. Int, 45(16), pp.20539~20544 (2019)
  25. M. Imran, , J. Mater. Res. Technol, 8(3), pp.3347~3356 (2019)
  26. P. Švec, "Microstructure and mechanical properties of B4C-TiB2 ceramic composites hot pressed with in-situ reaction", Journal of Ceramic Processing Research, 20(1), pp.113~120 (2019), 청정에너지연구소[DOI]
  27. X. W. Du, , Mater. Sci. Eng. A, 636, pp.133~137 (2015)
  28. 김경훈, "Methanol washing effects on spark plasma sintering behavior and mechanical properties of B4C ceramics", Journal of Ceramic Processing Research, 8(4), pp.238~242 (2007), 청정에너지연구소[DOI]
  29. R. F. Speyer, , J. Mater. Sci, 39(19), pp.6017~6021 (2004)
  30. M. Mashhadi, , Ceram. Int, 36(1), pp.151~159 (2010)
  31. A. Shoshin, , Fusion Eng. Des, 146, pp.2007~2010 (2019)
  32. B. M. Moshtaghioun, , J. Eur. Ceram. Soc, 36(16), pp.3925~3928 (2016)
  33. B. M. Moshtaghioun, , J. Eur. Ceram. Soc, 35(6), pp.1991~1998 (2015)
  34. J. E. Zorzi, , Mater. Lett, 59(23), pp.2932~2935 (2005)
  35. Y. Wang, , Ceram. Int, 46(10), pp.17117~17121 (2020)
  36. D. B. Hong, , Ceram. Int, 46(12), pp.20183~20190 (2020)
  37. Z. Y. Zhu, , Ceram. Int, 46(17), pp.27362~27372 (2020)
  38. E. Ghasali, , J. Mater. Res. Technol, 4(4), pp.411~415 (2015)
  39. C. Singhal, , Mater. Today : Proc, 5(11), pp.24287~24298 (2018)
  40. D. E. Clark, , Annu. Rev. Mater. Sci, 26(1), pp.299~331 (1996)
  41. Ricson R. Souza, "Ferroelectric characterization of SrBi2Ta2O9 obtained by microwave processing", Journal of Ceramic Processing Research, 18(1), pp.73~78 (2017), 청정에너지연구소[DOI]
  42. R. Ruginets, , Am. Ceram. Soc. Bull, 74(1), pp.56~58 (1995)
  43. J. D. Katz, , MRS Online Proc. Libr, 124(12), pp.219~226 (1988)
  44. G. Arslan, , J. Eur. Ceram. Soc, 23(8), pp.1243~1255 (2003)
  45. X. D. Yu, , Rare. Metal. Mat. Eng, 36, pp.587~589 (2007)
  46. R. W. Rice, , J. Mater. Sci, 31(6), pp.1509~1528 (1996)
  47. S. N. Chou, , Ceram Int, 35(1), pp.7~12 (2009)
  48. T. L. Chew, , J. Porous Mater, 18(3), pp.355~360 (2011)
  49. M.C. D'Arrigo, , J. Porous Mater., 9(4), pp.299~305 (2002)
  50. J. L. Yu, , J. Porous Mater, 19(5), pp.883~888 (2012)

이 간행물의 다른 논문 (16건)

Effect of thickness on moisture barrier properties of aluminum oxide using ozone-based atomic layer depositionHyeongsu Choi, Namgue Lee, 전형탁, Hyunwoo Park, Woochool Jang, Sejin Kwon, Seokyoon Shin, Juhyun Leepp. 253-257Synthesizing of nano-sized AlN powder with alumina ballsNuray Canikoğlupp. 258-263Kinematic behavior of melted glass for hot-extrusionW.C.J. Wei, Y.T. Huang, A.B. Wangpp. 264-275Examination of wear properties of Al/B4C composites reinforced with irregularly shaped B4Cİsmail Topcupp. 276-282Sintering technology and properties of permeable bricks prepared using manganese tailingsJingjing Liu, Rongjin Liu, Jieguang Song, Jing Li, Deping Luo, Ping Chen, Xueqing Yangpp. 283-288
원문 보기