Development of bamboo stem Ash-Al-Hybrid reinforced with Al2O3 produced by stir casting technique
0
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Aluminium matrix composites (AMCs) are the emerging and competent materials for numerous structural applications owing totheir virtuous mechanical and physical characteristics. The inclusion of reinforcements into the metallic matrix enhances thespecific strength, stiffness, hardness, creep, wear and fatigue properties related to general materials used for engineeringapplications. In this research work an attempt has been made to examine the fundamental mechanical properties of Al6063 hybridmetal matrix composite with two different fillers such as Al2O3 and Bamboo stem ash (BSA) as reinforcements by means of stircasting route. The mechanical properties of the resultant composites are observed as per ASTM standards and microstructuralstudy is used to characterize the distribution of reinforcements. The result reveals that there is an enhancement in mechanicalproperties of the resultant composite material by the inclusion of Al2O3 and BSA reinforcements, this in turn recommend that thisAl6063 composite has a substantial potential in various engineering applications as compared to pure Al6063.
Abstract
Aluminium matrix composites (AMCs) are the emerging and competent materials for numerous structural applications owing totheir virtuous mechanical and physical characteristics. The inclusion of reinforcements into the metallic matrix enhances thespecific strength, stiffness, hardness, creep, wear and fatigue properties related to general materials used for engineeringapplications. In this research work an attempt has been made to examine the fundamental mechanical properties of Al6063 hybridmetal matrix composite with two different fillers such as Al2O3 and Bamboo stem ash (BSA) as reinforcements by means of stircasting route. The mechanical properties of the resultant composites are observed as per ASTM standards and microstructuralstudy is used to characterize the distribution of reinforcements. The result reveals that there is an enhancement in mechanicalproperties of the resultant composite material by the inclusion of Al2O3 and BSA reinforcements, this in turn recommend that thisAl6063 composite has a substantial potential in various engineering applications as compared to pure Al6063.
참고문헌 (30)
- D. J. Lloyd, , Int. Mater. Rev, 1, pp.1~39 (1994)
- J. J. M. Hillary, , J. Compos. Mater, 10, pp.1~10 (2019)
- D. S. Prasad, , J. Mater. Res. Technol, 3(1), pp.79~85 (2014)
- S. Valdez, , Mater. Lett, 62(17-18), pp.2623~2625 (2008)
- A. Apasi, , Int. J. Eng. Sci. Res. Technol, 3, pp.1190~1198 (2012)
- F.C.R. Hernandez, , Mater. Chem. Phys, 132(2-3), pp.815~822 (2012)
- H. Zuhailawati, , J. Phys. Sci, 18, pp.47~55 (2007)
- K. V. Mahendra, , J. Compos. e Mater, 44(8), pp.989~1005 (2010)
- K. K. Alaneme, , J. Mater. Res. Technol, 2(2), pp.188~194 (2013)
- K. K. Alaneme, , Tribology in Industry, 35, pp.25~35 (2013)
- K. Ravi Kumar, , J. Alloys Comp, 765, pp.171~179 (2018)
- A.M. Rajesh, , Mater. Sci. Eng., 149, pp.1~12 (2016)
- S. Johny James, , Procedia Eng, 97, pp.1018~1026 (2014)
- C. U. Atuanya, , J. Chin. Adv. Mater. Soc, 10, pp.1~10 (2018)
- G. Pitchayyapillai, , Adv. Mater. Sci. Eng, 10, pp.1~9 (2016)
- K. K. Alaneme, , J. King Saud Univ., Eng. Sci, 30(1), pp.96~103 (2018)
- V. Bharath, , Procedia Mater. Sci, 6, pp.1658~1667 (2014)
- K. K. Alanemea, , J. Mater. Res. Technol, 3(1), pp.9~16 (2014)
- O. O. Daramola, , J. Pract. Technol, 33, pp.89~104 (2018)
- T. Pridhar, , Dig. J. Nanomater. Biostructures, 11, pp.845~852 (2016)
- O. Olaniran, , Am. J. Eng. Res, 6, pp.312~317 (2017)
- D. C. Neelima, , Int. J. Appl. Eng. Res, 4, pp.793~799 (2011)
- R. Singh, , Int. J. Appl. Eng. Res, 7, pp.1~11 (2012)
- Y. Pazhouhanfar, , Mater. Sci. Eng, 710, pp.172~180 (2018)
- M. Arulraj, , Int. J. Comput. Mater. Sci. Surf. Eng, 8(2), pp.145~166 (2019)
- M. Arulraj, , J. Braz. Soc. Mech. Sci. Eng, 40(1), pp.1~10 (2018)
- K. K. Alaneme, , J. Mater. Res. Technol, 2(1), pp.60~67 (2013)
- K. K. Alaneme, , J. Mater. Res. Technol, 2, pp.60~67 (2013)
- T.P.D. Rajan, , Compos. Sci. Technol, 67(15-16), pp.3369~3377 (2007)
- K. Ravi Kumar, , J. Alloys Comp, 765, pp.171~179 (2018)