Sintering behavior and microwave dielectric properties of the Zr1-x (Zn1/3Nb2/3)xTiO₄system with zinc-borosilicate glass
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The sintering behavior and microwave dielectric properties of the Zr1-x(Zn1/3Nb2/3)xTiO₄ (x = 0.4 and 0.6)-ZBS glass system were investigated with a view to applying the composition to low temperature co-fired ceramic technology. The addition of 25wt% ZBS glass ensured successful sintering below 925oC. Except an α-PbO2 type ZrTiO₄ solid solution, TiO₂ and monoclinic ZrO₂ were formed for the composition with x = 0.4 whereas Zn1/3Nb2/3TiO₄ was observed for x = 0.6. In addition, α-Zn₂SiO₄ and ZnB₂O₄were crystallized from the zinc borosilicate glass. Non-reactive liquid phase sintering (NLPS) occurred and a onestage sintering was conducted. The dieledtric constant was affected by the densification, i.e., the porosity and it obeyed the logarithimc mixing rule. Zr0.4 (Zn1/3Nb2/3)0.6TiO₄ with 25wt% ZBS glass sintered at 925oC gave 27.7 as the dielectric constant (εr), 3,850 GHz in as the Q×f value, and +6.1 ppm/oC as the temperature coefficient of resonant frequency (τf).
Abstract
The sintering behavior and microwave dielectric properties of the Zr1-x(Zn1/3Nb2/3)xTiO₄ (x = 0.4 and 0.6)-ZBS glass system were investigated with a view to applying the composition to low temperature co-fired ceramic technology. The addition of 25wt% ZBS glass ensured successful sintering below 925oC. Except an α-PbO2 type ZrTiO₄ solid solution, TiO₂ and monoclinic ZrO₂ were formed for the composition with x = 0.4 whereas Zn1/3Nb2/3TiO₄ was observed for x = 0.6. In addition, α-Zn₂SiO₄ and ZnB₂O₄were crystallized from the zinc borosilicate glass. Non-reactive liquid phase sintering (NLPS) occurred and a onestage sintering was conducted. The dieledtric constant was affected by the densification, i.e., the porosity and it obeyed the logarithimc mixing rule. Zr0.4 (Zn1/3Nb2/3)0.6TiO₄ with 25wt% ZBS glass sintered at 925oC gave 27.7 as the dielectric constant (εr), 3,850 GHz in as the Q×f value, and +6.1 ppm/oC as the temperature coefficient of resonant frequency (τf).
참고문헌 (21)
- W. S. Kim, , J. Kor.Ceram. Soc, 40(4), pp.346~349 (2003)
- H. Ohsato, , J. Electroceram, 17, pp.445~450 (2006)
- Y. C. Zhang, , Mater. Lett, 58(7-8), pp.1392~1395 (2004)
- H. J. Kim, , J. Am. Ceram. Soc, 80(5), pp.1316~1318 (1997)
- T. Takada, , J. Am. Ceram. Soc, 77(7), pp.1909~1916 (1994)
- V. Tolmer, , J. Am. Ceram. Soc, 80(8), pp.1981~1991 (1997)
- H. J. Lee, , Mater. Res. Bull, 32(7), pp.847~855 (1997)
- M. Maeda, , Jpn. J. Appl. Phys.Supp, 26, pp.76~79 (1987)
- Y. C. Zhang, , J.Electroceram, 14, pp.67~74 (2005)
- J. Wang, (2007), J.Electroceram
- J. Y. Kim, , J. Electroceram, 17, pp.179~183 (2006)
- M. Viticoli, , Mater. Sci. & Eng. B, pp.87~91 (2005)
- R. D. Shannon, , Acta Cryst, 2, pp.751~767 (1976)
- B. W. Hakki, , IRE Trans. Microwave Theory Tech, MTT-8, pp.402~410 (1960)
- J.-M. Wu, , J. Non-Cryst. Solids, 260, pp.116~124 (1999)
- S. O. Yoon, (2007), Ceram. Inter
- E. N. Bunting, , J. Am. Ceram. Soc, 13, pp.5~10 (1930)
- F. G. Ewsuk, "in Ceramic powder science: Part B", pp.969~977 (1988), Am. Ceram. Soc
- K. G. Ewsuk, "in Ceramic Transactions", Am. Ceram.Soc, 15, pp.279~295 (1990)
- S. Kemethmuller, , J. Am. Ceram. Soc, 90, pp.64~70 (2007)
- W. D. Kingery, "Introduction to ceramics", pp.947~960 (1976), John Wiley and Sons