Effects of the addition of minute amounts of alumina on the microstructure and sintering behavior of yttria stabilized tetragonal zirconia polycrystals ceramic via a co-precipitation process
1
조회
0
다운로드
0
인용
0
참고문헌
초록
It is feasible to add homogeneously minute amounts (0.25 wt%) of Al₂O₃ into 3 mol% yttria stabilized tetragonal zirconia polycrystals using a co-precipitation procedure to produce precursory gel nano-powders. X-ray diffraction, scanning electron microscopy, high-angle annular dark-field-field emission gun transmission electron microscopy, relative density determination, shrinkage, and resistivity measurements using impedance spectroscopy were combined to elucidate the microstructure and sintering behavior of zirconia ceramics produced using 0.25 wt% added Al₂O₃, possibly the limit of solubility of Al₂O₃ in the ZrO₂ structure. Two modes of sintering behavior may be described as: (I) The total solid solution of Al₂O₃ in the solid solution of ZrO₂ structure via a precursory co-precipitation procedure; calcining at 800 oC and sintering at 1275 oC can be shown to indicate the viable solubility of Al₂O₃ in the ZrO₂ structure, designated as stage I of the thermal treatment; and (II) At the higher sintering temperature, above 1275 oC, the segregation of Al₂O₃ at triple junction occurs. Higher bulk and grain boundary resistivity values are found for the sample sintered at 1275 oC, which probably resulted from the dissolution of Al₂O₃ in the ZrO₂ structure.
Abstract
It is feasible to add homogeneously minute amounts (0.25 wt%) of Al₂O₃ into 3 mol% yttria stabilized tetragonal zirconia polycrystals using a co-precipitation procedure to produce precursory gel nano-powders. X-ray diffraction, scanning electron microscopy, high-angle annular dark-field-field emission gun transmission electron microscopy, relative density determination, shrinkage, and resistivity measurements using impedance spectroscopy were combined to elucidate the microstructure and sintering behavior of zirconia ceramics produced using 0.25 wt% added Al₂O₃, possibly the limit of solubility of Al₂O₃ in the ZrO₂ structure. Two modes of sintering behavior may be described as: (I) The total solid solution of Al₂O₃ in the solid solution of ZrO₂ structure via a precursory co-precipitation procedure; calcining at 800 oC and sintering at 1275 oC can be shown to indicate the viable solubility of Al₂O₃ in the ZrO₂ structure, designated as stage I of the thermal treatment; and (II) At the higher sintering temperature, above 1275 oC, the segregation of Al₂O₃ at triple junction occurs. Higher bulk and grain boundary resistivity values are found for the sample sintered at 1275 oC, which probably resulted from the dissolution of Al₂O₃ in the ZrO₂ structure.
참고문헌 (17)
- J.L. Shi, , J. Europ. Ceram. Soc, 15, pp.967~973 (1995)
- J.K. Lee, , J. Mater. Sci. Lett, 21, pp.259~261 (2002)
- S.Y. Yang, "Solid State Ionics", 172, pp.413~416 (2004)
- X. Guo, , J. Am. Ceram. Soc, 86, pp.1867~1873 (2003)
- C.L. Yang, , Ceram. Int, 31, pp.297~303 (2005)
- V.V. Srdic, , J. Am. Ceram. Soc, 84, pp.2771~2776 (2001)
- K. Matsui, , J. Mater. Res, 21, pp.2278~2289 (2006)
- A.L. Vasiliev, , Acta Mater, 54, pp.4921~4928 (2006)
- J.S. Lee, , J. Mater. Res, 16, pp.2739~2751 (2001)
- Y.M. Chiang, , J. Am. Ceram. Soc, 73, pp.3278~3285 (1990)
- X. Guo, , Prog. Mater. Sci, 51, pp.151~210 (2006)
- X. Guo, "Phys. Status Solidi A", 183, pp.261~271 (2001)
- X. Guo, , Solid State Ionics, pp.154~155 (2002)
- J.E. Bauerle, , J. Phys. Chem. Solids, 30, pp.2657~2670 (1969)
- X. Guo, "J. Am. Ceram. Soc", 86, pp.1867~1873 (2003)
- X. Guo, "Solid State Ionics", 80, pp.159~166 (1995)
- X. Guo, , J. Europ. Ceram. Soc, pp.25~32 (1995)