본문 바로가기
KERD
논문KCI 등재

Estimation of residual stress by instrumented indentation: A review

장재일
청정에너지연구소 (Clean-Energy Research Institute)|2009.06|Journal of Ceramic Processing Research|제10권 제3호|pp. 391-400|DOI 10.36410/jcpr.2009.10.3.391

1

조회

0

다운로드

6

인용

0

참고문헌

키워드

Residual stressNanoindentationInstrumented Indentation
주제분류재료공학

초록

Since residual stresses that are often generated in many components and devices by thermal mismatch or thermal/mechanical processing can strongly affect their mechanical performance and reliability, there has been considerable scientific and engineering interest in non-destructively determining the residual stresses in ceramics, glasses and metals. In this regard, recently much effort has been made to develop new methods of residual stress measurement using an instrumented indentation technique (especially nanoindentation). In the present paper, the recently-developed methods are critically reviewed and related issues are discussed in terms of advantages and shortcomings of each method, in order to provide some insight for future research in the field.

Abstract

Since residual stresses that are often generated in many components and devices by thermal mismatch or thermal/mechanical processing can strongly affect their mechanical performance and reliability, there has been considerable scientific and engineering interest in non-destructively determining the residual stresses in ceramics, glasses and metals. In this regard, recently much effort has been made to develop new methods of residual stress measurement using an instrumented indentation technique (especially nanoindentation). In the present paper, the recently-developed methods are critically reviewed and related issues are discussed in terms of advantages and shortcomings of each method, in order to provide some insight for future research in the field.

참고문헌 (71)

  1. I.C. Noyan, "Residual Stress; Measurement by Diffraction and Interpretation" (1987), Springer-Verlag
  2. V. Hauk, "Structural and Residual Stress Analysis by Nondestructive Methods" (1997), Elsevier
  3. J. Lu, "Handbook of Measurement of Residual Stresses" (1996), Fairmount Press
  4. K. Masubuchi, "Analysis of Welded Structures: Residual Stresses, Distortion, and their Consequences" (1980), Pergamon Press
  5. Y.I. Golovin, , Physics of the Solid State, 50, pp.2205~2236 (2008)
  6. M.F. Doerner, , J. Mater. Res., 1, pp.601~609 (1986)
  7. W.C. Oliver, , J. Mater. Res., 7, pp.1564~1583 (1992)
  8. J.S. Field, , J. Mater. Res., 10, pp.101~112 (1995)
  9. M.V. Swain, , Mater. Sci. Eng. A, 253, pp.160~166 (1998)
  10. M. Dao, , Acta Mater., 49, pp.3899~3918 (2001)
  11. J.-I. Jang, , Int. J. Fracture, 131, pp.15~34 (2005)
  12. B.N. Lucas, , Metall. Mater. Trans. A, 30, pp.601~610 (1999)
  13. H. Li, , J. Mater. Res, 19, pp.513~522 (2004)
  14. R.F. Cook, , J. Am. Ceram. Soc., 73, pp.787~817 (1990)
  15. J.-I. Jang, , Acta Mater, 56, pp.4458~4469 (2008)
  16. W.D. Nix, , J. Mech. Phys. Solids, 46, pp.411~425 (1998)
  17. J.G. Swadener, , J. Mech. Phys. Solids, 50, pp.681~694 (2002)
  18. V. Domnich, , Appl. Phys. Lett., 76, pp.2214~2216 (2000)
  19. J.-I. Jang, , Acta Mater., 53, pp.1759~1770 (2005)
  20. C.A. Schuh, , J. Mater. Res., 19, pp.46~57 (2004)
  21. J.-I. Jang, , Appl. Phys. Lett., 90 (2007)
  22. W.C. Oliver, , J. Mater. Res., 19, pp.3~20 (2004)
  23. Y.-T. Cheng, , Mater. Sci. Eng. R, 44, pp.91~149 (2004)
  24. G.M. Pharr, , Mater. Sci. Eng. A, 253, pp.151~159 (1998)
  25. A.C. Fischer-Cripps, , Vacuum, 569(585) (2000)
  26. X. Li, , Mater. Characterization, 48, pp.11~36 (2002)
  27. B. Bhushan, , Int. Mater. Reviews, 48, pp.125~164 (2003)
  28. N.K. Mukhopadhyay, , Int. Mater. Reviews, 51, pp.209~245 (2006)
  29. C.A. Schuh, , Mater. Today, 9(5), pp.32~40 (2006)
  30. A. Gouldstone, , Acta Mater, 55, pp.4015~4039 (2007)
  31. A.C. Fischer-Cripps, "Nanoindentation" (2002), Springer-Verlag
  32. Change in hardness of a plate by bending, "S. Kokubo", 256~267, pp.Science Reports of the Tohoku Imperial University (Series 1) 21 (1932)
  33. G. Sines, "Hardness measurement for determination of residual stresses", ASTM Bulletin, 180, pp.35~37 (1952)
  34. T.Y. Tsui, , J. Mater. Res., 11, pp.752~759 (1996)
  35. J. Pomey, "Publications scientifiques et Techniques du Ministere de l’Air No. 263", ~ (1950)
  36. J.H. Underwood, , Experimental Mechanics, 30, pp.373~380 (1973)
  37. S.G. Roberts, , J. Am. Ceram. Soc., 82, pp.1809~1816 (1999)
  38. M.M. Chaudhri, , Phil. Mag. A, 62, pp.1~27 (1990)
  39. S. Chandrasekar, , Phil. Mag. A, 67, pp.1187~1218 (1993)
  40. K. Zeng, , J. Am. Ceram. Soc, 77, pp.524~530 (1994)
  41. K. Zeng, , Acta Metall. Mater., 43, pp.1935~1943 (1995)
  42. T.-Y. Zhang, , Acta Mater., 47, pp.3869~3878 (1999)
  43. K. Kese, , J. Am. Ceram. Soc., 86, pp.811~816 (2003)
  44. W.R. LaFontaine, , J. Mater. Res., 6, pp.2084~2090 (1991)
  45. D. Tabor, "Oxford" (1951), Clarendon press
  46. K.L. Johnson, "Contact mechanics" (1985), Cambridge Univ. Press
  47. A. Bolshakov, , J. Mater. Res., 11, pp.760~768 (1996)
  48. A.V. Zagrebelny, , Scripta Mater., 37, pp.1869~1875 (1997)
  49. M. Ishihara, , Trans. JSME A, 62, pp.2305~2309 (1996)
  50. S. Suresh, , Acta Mater, 46, pp.5755~5767 (1998)
  51. S. Carlsson, , Acta Mater, 49, pp.2179~2191 (2001)
  52. S. Carlsson, , Acta Mater., 49, pp.2193~2203 (2001)
  53. Y.-H. Lee, , Scripta Mater, 49, pp.459~465 (2003)
  54. J.-I. Jang, , Scripta Mater., 48, pp.743~748 (2003)
  55. Y.-H. Lee, , Int. J. Modern Phys. B, 17, pp.1141~1146 (2003)
  56. Y.-H. Lee, , Acta Mater, 52, pp.1555~1563 (2004)
  57. Y. Lee, , Phil. Mag., 86, pp.5497~5504 (2006)
  58. N. Huber, , Acta Mater., 56, pp.6205~6213 (2008)
  59. B. Taljat, , Mat. Res. Sco. Symp. Proc., 통권 : 594, pp.519~524 (2000)
  60. J.G. Swadener, , J. Mater. Res., 16, pp.2091~2102 (2001)
  61. E.R. Olivas, , Scripta Mater., 54, pp.263~268 (2006)
  62. C.M. Lepienski, , Thin Solids Films, 448, pp.251~257 (2004)
  63. X. Chen, , Mater. Sci. Eng. A, 416, pp.139~149 (2006)
  64. M. Zhao, , Acta Mater., 54, pp.2823~2832 (2006)
  65. J. Yan, , Int. J. Solids. Struc., 44, pp.3720~3737
  66. Z.-H. Xu, , Acta Mater., 53(5), pp.1913~1919 (2005)
  67. Z.-H. Xu, , Phil. Mag., 86, pp.2835~2846 (2006)
  68. L.Z. Liu, , J. Mater. Res., 21, pp.1680~1686 (2006)
  69. T.E. Buchheit, , J. Mater. Res., 22, pp.2875~2887 (2007)
  70. Y.-H. Lee, , Scripta Mater., 51, pp.887~891 (2004)
  71. J.-H. Han, , Key Eng. Mater., 345, pp.1125~1128 (2007)

관련 논문AI추천

인장 및 압축 등방 잔류응력 측정을 위한 누프 압입시험의 응력환산계수 결정김영천, 정민재한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2021 · 제20권 제6호Non-equibiaxial residual stress evaluation methodology using simulated indentation behavior and machine learning김성우, 문성인, 윤민호, 최민재, 홍석민한국원자력학회 · Nuclear Engineering and Technology2024 · 제56권 제4호A Method of Measuring the Plastic Properties of Materialsusing Spherical Indentation강윤식, 박대효, 이광하, Xi Chen한국전산구조공학회 · 한국전산구조공학회논문집2010 · 제23권 제4호Stress–strain curve prediction strategy based on instrumented indentation test using master curve of SS316 stress–strain curve김문성, 김성우, 문성인, 이승건, 홍석민한국원자력학회 · Nuclear Engineering and Technology2025 · 제57권 제5호Stress–strain curve estimation from load–depth curve of spherical indentation test based on finite element analysis and optimization김문성, 김성우, 문성인, 이승건, 홍석민한국원자력학회 · Nuclear Engineering and Technology2025 · 제57권 제5호나노 잔류응력 측정을 위한 비등방 압입자의 깊이별 응력환산계수 분석김영진, 김영천, 김원준한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2019 · 제26권 제4호

이 간행물의 다른 논문 (14건)

Formation kinetics and structures of high-density vertical Si nanowires on (111)Si substratesC. H. Chung, Y. H. Chang, S. L. Chengpp. 243-247Fundamental issues of applications of C/SiC composites for re-entry vehiclesLaifei Cheng, Yongdong Xu, Qingqing Ke, Hui Mei, Litong Zhang, Yani Zhangpp. 248-256Joining of RBSiC using a preceramic polymer with Al김득중, Dong-Il Chun, Dong-Hwa Lee, Hyeon-Woo Jang, Young-Seok Kimpp. 263-265The effect of SiO2 on the performance of inorganic sludge-based structural concretesMin Sik Jang, Na Ra Ha, Zheng Xun Yang, 황규홍, 이종국pp. 266-268Dispersion stability and its effect on tape casting of solvent-based SiC slurriesParlindungan Yonathan, Weon-Ju Kim, 윤당혁, Ji-Yeon Park, 이종현pp. 301-307
원문 보기