본문 바로가기
KERD
논문KCI 등재

Crack-healing behavior and bending strength of Al2O3/SiC composite ceramics according to the amount of added Y2O3

1

조회

0

다운로드

8

인용

0

참고문헌

키워드

주제분류재료공학

초록

Three Al2O3/SiC composite ceramics were prepared, which included 1, 3 or 5 wt.% Y2O3, and their high-temperature bending strengths and in-situ crack-healing behaviors examined. A surface elliptical-crack of about 100 ߦ in diameter was introduced in the specimens using a Vickers hardness indenter. From in-situ observations, the Al2O3/SiC composite ceramic with 3 wt.%Y2O3 showed superior crack-healing ability than the 1 and 5 wt.% Y2O3 ceramics. The as-cracked specimen with 3 wt.% Y2O3showed strength recovery on heating for one hour at 1473 K in air, which may have been due to the lower crack-healing temperature on the addition of 3 wt.% Y2O3. The heat-resistance limit temperatures of the crack-healed Al2O3/SiC composite ceramics were 1073, 1373 and 873 K for 1, 3 and 5 wt.% Y2O3, respectively.

Abstract

Three Al2O3/SiC composite ceramics were prepared, which included 1, 3 or 5 wt.% Y2O3, and their high-temperature bending strengths and in-situ crack-healing behaviors examined. A surface elliptical-crack of about 100 ߦ in diameter was introduced in the specimens using a Vickers hardness indenter. From in-situ observations, the Al2O3/SiC composite ceramic with 3 wt.%Y2O3 showed superior crack-healing ability than the 1 and 5 wt.% Y2O3 ceramics. The as-cracked specimen with 3 wt.% Y2O3showed strength recovery on heating for one hour at 1473 K in air, which may have been due to the lower crack-healing temperature on the addition of 3 wt.% Y2O3. The heat-resistance limit temperatures of the crack-healed Al2O3/SiC composite ceramics were 1073, 1373 and 873 K for 1, 3 and 5 wt.% Y2O3, respectively.

참고문헌 (11)

  1. P.F. Becher, , J. Am. Ceram. Soc, 67(12), pp.267~269 (1984)
  2. K. Ando, , Fatigue Fract. Eng. Mater. Struct, 21(1), pp.119~122 (1998)
  3. K.W. Nam, , Mater. Sci. and Engng. A, 471(1), pp.102~105 (2007)
  4. F.F. Lange, , J. Am. Ceram. Soc., 53(5), pp.290~ (1970)
  5. M. Mimoto, , J. Mater. Sci. Lett, 15(22), pp.1976~1978 (1996)
  6. K. Ando, , Fatigue Fract. Eng. Mater. Struct., 27(7), pp.533~541 (2004)
  7. M. Ono, , Fatigue Fract. Eng. Mater. Struct., 30(7), pp.599~607 (2007)
  8. K. Ando, , J. Am. Ceram. Soc, 84(9), pp.2073~2078 (2001)
  9. K. Takahashi, , J. Am. Ceram. Soc, 88(3), pp.645~651 (2005)
  10. S.K. Lee, , J. Eur. Ceram. Soc, 25(15), pp.3495~3502 (2005)
  11. S.R. Choi, , Scr. Metall. Mater, 26, pp.1263~1268 (1992)

관련 논문AI추천

이 간행물의 다른 논문 (13건)