Alumina phase transformation behavior on titania-doped nano α-alumina by a solid liquid process
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Alumina phase transformation behavior on titania-doped nano α-Al2O3 powder by a solid liquid process was investigated under various conditions, such as different solvent concentrations and calcining temperatures. Three batches of the precursor powders were calcined at three different temperatures of 600 oC, 750 oC and 900 oC for 5 h and a final product of titania-doped nano α-Al2O3 powder was obtained. The product has been identified by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The XRD results show that the alumina phases of the powders were determined to be γ-Al2O3 and α-Al2O3. The optimum calcination temperature of the precursor powder for crystallization of nano α-Al2O3 was found to be 900 oC for 5 h. A higher concentration of solvent used for the sample preparation leads to the formation of a uniform and very smooth particle morphology, and smaller particle grains. The TEM images indicate that the average size of α-Al2O3 grains was ≤ 50 nm and larger grains of TiO2 with 50-250 nm sizes.
Abstract
Alumina phase transformation behavior on titania-doped nano α-Al2O3 powder by a solid liquid process was investigated under various conditions, such as different solvent concentrations and calcining temperatures. Three batches of the precursor powders were calcined at three different temperatures of 600 oC, 750 oC and 900 oC for 5 h and a final product of titania-doped nano α-Al2O3 powder was obtained. The product has been identified by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The XRD results show that the alumina phases of the powders were determined to be γ-Al2O3 and α-Al2O3. The optimum calcination temperature of the precursor powder for crystallization of nano α-Al2O3 was found to be 900 oC for 5 h. A higher concentration of solvent used for the sample preparation leads to the formation of a uniform and very smooth particle morphology, and smaller particle grains. The TEM images indicate that the average size of α-Al2O3 grains was ≤ 50 nm and larger grains of TiO2 with 50-250 nm sizes.
참고문헌 (19)
- Yeong Min Hahm, "Optimum Conditions to Prepare Spherical Alumina Powder with Controlled Aggregation under the W", O Emulsion Method, 2004, pp.10(5), 826~833[DOI]
- N. Ichinose, "Introduction To Fine Ceramics. Applications In Engineering" (1987), John Wiley & Sons, Inc
- Y.-C. Lee, , J. Am. Ceram. Soc, 90(6), pp.1723~1727 (2007)
- M.C. Roco, "R&D Status and Trends in Nanoparticles, Nanostructured Materials, and Nanodevices in the United States", in Proceedings of the May 8-9, 1997 Workshop, pp.1~3 (1998), Loyola College Press
- Nanoscience and nanotechnologies: opportunities and uncertainties, "The Royal Society", ~ (2008)
- Guozhong Cao, "Nanostructures & Nanomaterials: Synthesis, Properties, & Applications" (2004), Imperial College Press
- A.K. Bandyopadhyay, "Nano Materials" (2008), New Age International Press
- K.C. Patil, "Chemistry of Nanocrystalline Oxide Materials, Combustion Synthesis, Properties and Applications" (2008), World Scientific Press
- Y. Sarikaya, , Ceram Int, 14(4), pp.239~244 (1998)
- C.P. Lin, , J. Am. Ceram. Soc, 85(6), pp.1467~1472 (2002)
- T. Bastomi, "The Development of Ceramic Research Result through A Collaboration with Industries To Improve The Competitiveness and The Added Value of The Industrial Products", n Proceeding of Ceramic National Seminar VIII, pp.99~104 (2009), Center for Ceramics
- R.K. Pati, , Materials Letters, 44(5), pp.299~303 (2000)
- T. Peng, , Materials Research Bulletin, 41(9), pp.1638~1645 (2006)
- J. Ding, , J. Am. Ceram. Soc, 79(11), pp.2956~2958 (1996)
- R.K. Pati, , J. Am. Ceram. Soc, 84(12), pp.2849~2852 (2004)
- V.V. Gusarov, , Inorganic Materials, 36(11), pp.1127~1932 (2000)
- C.H. Ting, , International Conference on Construction and Building Technology, 18, pp.197~202 (2008)
- P.S. Santos, , Materials Research, 3(4), pp.104~114 (2000)
- YongJaeKwon, "Characterization of ZnO nanopowders synthesized by the polymerized complex method via an organochemical route", Journal of Ceramic Processing Research, 3(3), pp.146~149 (2002), 세라믹공정연구센터