Ceramic properties of a Turkish clay in the Aydın region
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The aim of this study is to determine the ceramic properties of Karacasu clay (KC) fired at various temperatures. For this purpose, the clay sample was first characterized by chemical analysis, X-ray diffraction (XRD), DTA/TG analysis and plasticity measurements. The mineralogical composition of KC was dominated by illite/mica, kaolinite, smectite, quartz and hematite. DTA/TG analyses showed comparable behaviour to those of illitic clays. The data obtained from plasticity tests indicated that KC was very high plastic clay. To evaluate firing behaviors, pressed clay samples were fired separately at temperatures between 850 and 1200℃. Fired specimens were evaluated by water absorption, linear shrinkage, bulk density, bending strength, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that there became a significant densification at temperatures especially above 1000℃. Based on the technological characteristics, KC could be used in the manufacture of structural ceramics.
Abstract
The aim of this study is to determine the ceramic properties of Karacasu clay (KC) fired at various temperatures. For this purpose, the clay sample was first characterized by chemical analysis, X-ray diffraction (XRD), DTA/TG analysis and plasticity measurements. The mineralogical composition of KC was dominated by illite/mica, kaolinite, smectite, quartz and hematite. DTA/TG analyses showed comparable behaviour to those of illitic clays. The data obtained from plasticity tests indicated that KC was very high plastic clay. To evaluate firing behaviors, pressed clay samples were fired separately at temperatures between 850 and 1200℃. Fired specimens were evaluated by water absorption, linear shrinkage, bulk density, bending strength, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that there became a significant densification at temperatures especially above 1000℃. Based on the technological characteristics, KC could be used in the manufacture of structural ceramics.
참고문헌 (14)
- H. Baccour, , J. Mater. Process. Tech, 209, pp.2812~2817 (2009)
- B. K. Ngun, , Appl. Clay Sci, 53, pp.33~41 (2011)
- H. H. Murray, , Clay Miner, 34, pp.39~49 (1999)
- P. P aly, , Clay Miner, 43, pp.415~435 (2008)
- M. I. Carretero, , Appl. Clay Sci, 20, pp.301~306 (2002)
- S. Çizer, , Second International Ceramics Congress, 1, pp.482~489 (1994), Traditional Ceramics
- Z. Yayla, , International Conference-Clays, clay minerals and layered materials-CMLM2009 (2009)
- H. Baccour, "Composition and ceramic properties of triassic clays from tunisia", Journal of Ceramic Processing Research, 11(2), pp.209~214 (2010), 세라믹공정연구센터
- Ï. Özkan, , Appl. Clay Sci, 49, pp.420~425 (2010)
- F. A. C. Milheiro, , Ceram. Int, 31, pp.757~763 (2005)
- S. N. Monteiro, , Appl. Clay Sci, 27, pp.229~234 (2004)
- "ASTM, D 4318-10, Standard Test Methods for Liquid Limit, Plastic Limit and Plasticity Index of Soils", ~ (2010)
- "ISO 10545-3, Ceramic Tiles-Part3: Determination of Water Absorption, Apparent Porosity, Apparent Relative Density and Bulk Density", ~ (2000)
- "ISO 10545-4, Ceramic Tiles-Part4: Determination of Modulus of Rupture and Breaking Strength", ~ (2000)