Effect of spodumene addition on pyroplastic deformation of porcelain stoneware
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Lithium aluminosilicates, such as spodumene, have been used as raw materials in the production of thermal shock resistant whiteware and sanitaryware. The presence of spodumene causes enhancement of mullitization and imparts better physical and mechanical properties to ceramics. In this study, the influence of Li2O-content on the properties of a standard porcelain stoneware body was investigated. Sodium feldspar was replaced by the spodumene in varying amounts (up to 4 wt. %). The results showed a significant microstructural improvement, the presence of spodumene which, during firing, allows the development of a low viscosity liquid phase with a decrease of closed porosity, also with increasing bulk density and bending strength.
Abstract
Lithium aluminosilicates, such as spodumene, have been used as raw materials in the production of thermal shock resistant whiteware and sanitaryware. The presence of spodumene causes enhancement of mullitization and imparts better physical and mechanical properties to ceramics. In this study, the influence of Li2O-content on the properties of a standard porcelain stoneware body was investigated. Sodium feldspar was replaced by the spodumene in varying amounts (up to 4 wt. %). The results showed a significant microstructural improvement, the presence of spodumene which, during firing, allows the development of a low viscosity liquid phase with a decrease of closed porosity, also with increasing bulk density and bending strength.
참고문헌 (9)
- P.M. Tenorio, "The influence of microstructure on performance of white porcelain stoneware", Ceram. Int, 30, pp.953~963 (2004)
- E. Sanchez, "Porcelain tile microstructure: Implications for polished tile properties", J. Eur. Ceram. Soc, 26, pp.2533~2540 (2006)
- M. Dondi, "Stain resistance of porcelain stoneware tiles: the influence of microstructure", Key Eng.. Mat, 264-268, pp.1511~1514 (2004)
- A. Fluegel, "Glass viscosity calculation based on a global statistical modeling approach", Glass Tech. .Eur. J. Glass Sci. Tech. A, 48(1), pp.13~30 (2007)
- D. U. Tulyaganov, "Influence of lithium oxide as auxiliary flux on the properties of triaxial porcelain bodies", J. Eur. Ceram. Soc, 26, pp.1131~1139 (2006)
- J. L. Amoros, "Effect of the green porous texture on porcelain tile properties", J. Eur. Ceram Soc, 27, pp.2295~2301 (2007)
- D.U Tulyaganov, "Influence of Li2O doping on nonisothermal evolution of phases in K-Na-containing aluminosilicate matrix", J. Am. Ceram. Soc., 89(1), pp.292~297 (2006)
- M. Raimondo, "Process of pyroplastic shaping for special purpose porcelain stoneware tiles", Ceram. Int. (2008)
- A. M. Bernardi, "Pyroplasticity in porcelain tiles", Mat. Sci. and Eng. A, 427, pp.316~319 (2006)