Characterization of anorthite-based porcelain prepared by using wollastonite as a calcium source
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The porcelain based on anorthite (CaO • Al2O3 • 2SiO2) has been developed using wollastonite (CaO • SiO2) as a calcium source. The slip casting was applied to obtain green body with high-strength. The sintering behaviors of the green specimens were evaluated by determining linear shrinkage, water absorption, bulk density and flexural strength. It was found that the anorthite porcelain fired at 1215 o C had excellent technical properties such as water absorption: 0.00% and flexural strength: 109.5 MPa. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis results showed the high flexural strength was due to the densification of microstructures and the formation of high crystalline content in the porcelain body. In addition, thermal expansion performance and appearance quality of the final product were discussed.
Abstract
The porcelain based on anorthite (CaO • Al2O3 • 2SiO2) has been developed using wollastonite (CaO • SiO2) as a calcium source. The slip casting was applied to obtain green body with high-strength. The sintering behaviors of the green specimens were evaluated by determining linear shrinkage, water absorption, bulk density and flexural strength. It was found that the anorthite porcelain fired at 1215 o C had excellent technical properties such as water absorption: 0.00% and flexural strength: 109.5 MPa. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis results showed the high flexural strength was due to the densification of microstructures and the formation of high crystalline content in the porcelain body. In addition, thermal expansion performance and appearance quality of the final product were discussed.
참고문헌 (29)
- W. M. Carty, , J. Am. Ceram. Soc, 81, pp.3~20 (1998)
- S. R. Braganca, , Ceram. Int, 29, pp.801~806 (2003)
- O. I. Ece, , Ceram. Int, 28, pp.131~140 (2002)
- Y. Kobayashi, , J. Am. Ceram. Soc, 75, pp.1801~1806 (1992)
- A. C. B. Ustundag, , J. Am. Ceram. Soc, 26, pp.167~177 (2006)
- Y. Iqbal, , Br. Ceram. Trans, 99, pp.110~116 (2000)
- A. Capoglu, , J. Eur. Ceram. Soc, 24, pp.2067~2072 (2004)
- A. Capoglu, , Key. Eng. Mater, 264-268, pp.1585~1588 (2004)
- A. Capoglu, , J. Eur. Ceram. Soc, 31, pp.321~329 (2010)
- A. Capoglu, , Key. Eng. Mater, 264-268, pp.1621~1624 (2004)
- C. B. Ustundag, , J. Eur. Ceram. Soc, 26, pp.167~177 (2006)
- X. S. Cheng, , Ceram. Inter, 38, pp.3227~3235 (2012)
- M. Sathiyakumar, , Ceram. Inter, 29, pp.869~873 (2003)
- B. Baran, , J. Eur. Ceram. Soc, 23, pp.2061~2066 (2003)
- M. Magallanes-Perdomo, , J. Eur. Ceram. Soc, 31, pp.1549~1561 (2011)
- R. Ponraj, , J. Mater. Sci, 29, pp.4385~4392 (1994)
- P. T. Weon, , J. Mater. Sci, 37, pp.1273~1279 (2002)
- R. D. Rawlings, , J. Mater. Sci, 41, pp.733~761 (2006)
- A. Christogerou, , Ceram. Inter, 35, pp.447~452 (2009)
- Y. Kobayashi, , J. Am. Ceram. Soc, 77, pp.833~834 (1994)
- S. Kurama, , Ceram. Int, 35, pp.827~830 (2009)
- J. Martín-Márquez, , Ceram. Inter, 34, pp.1867~1873 (2008)
- K. Andreas, , J. Eur. Ceram. Soc, 29, pp.207~221 (2009)
- S. A. F. Batista, , Bri. Ceram. Trans, 100, pp.256~259 (2001)
- M. U. Taskiran, , J. Eur. Ceram. Soc, 25, pp.293~300 (2005)
- A. Capoglu, , Key. Eng. Mater, 264-268, pp.1495~1498 (2004)
- K. Yuichi, , J. Ceram. Soc. Jap, 111, pp.872~877 (2003)
- A. Capoglu, , J. Eur. Ceram. Soc, 25, pp.3157~3162 (2005)
- Kr. D. Swapan, , Thermochim. Acta, 406, pp.199~206 (2003)