Breakdown characteristics of geopolymers according to curing and aging conditions
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Lightweight geopolymers made of integrated gasification combined cycle (IGCC) slags and Si sludges exhibit an unusualbreakdown, known as dentable characteristics. In this study, dentable characteristics of lightweight geopolymers wereinvestigated under different curing and aging conditions. The relationship between these conditions and dentable characteristicswas determined by measuring compressive strength, conducting XRD and FT-IR, and by optical microscopic observations ofpore size, distribution, and shape. Dentable characteristics cannot be simply controlled by changing the curing and agingconditions. Homogeneous pore distribution, size, and shape by extra mixing did not enhance the dentable characteristics. Although the moisture and Si content of the geopolymer would control the dentable characteristic in some measure, agingconditions were found to be the most important effect on the dentable characteristics and stability of geopolymers in water.
Abstract
Lightweight geopolymers made of integrated gasification combined cycle (IGCC) slags and Si sludges exhibit an unusualbreakdown, known as dentable characteristics. In this study, dentable characteristics of lightweight geopolymers wereinvestigated under different curing and aging conditions. The relationship between these conditions and dentable characteristicswas determined by measuring compressive strength, conducting XRD and FT-IR, and by optical microscopic observations ofpore size, distribution, and shape. Dentable characteristics cannot be simply controlled by changing the curing and agingconditions. Homogeneous pore distribution, size, and shape by extra mixing did not enhance the dentable characteristics. Although the moisture and Si content of the geopolymer would control the dentable characteristic in some measure, agingconditions were found to be the most important effect on the dentable characteristics and stability of geopolymers in water.
참고문헌 (23)
- Brundtland Commission, "Our Common Future", pp.27~ (1987), Oxford University Press
- V. Jadhao, , Int. J. Eng. Adv. Tec, 2(2), pp.148~153 (2013)
- 김민정, "Si 슬러지의 첨가가 경량지오폴리머 물성에 미치는 영향", 한국결정성장학회지, 29(6), pp.257~263 (2019), 한국결정성장학회[DOI]
- Yootaek Kim, "Enhancement of compressive strength of lightweight geopolymers", Journal of Ceramic Processing Research, 20(5), pp.522~529 (2019), 청정에너지연구소[DOI]
- K. T. Koh, , J. Kor. Rec. Consrt. Res. Inst, 16, pp.119~126 (2011)
- P. Purnell, , Environ. Sci. Technol, 46, pp.454~461 (2012)
- L. K. Turner, , Constr. Build. Mater, 43, pp.125~130 (2013)
- Yootaek Kim, "Effects of manufacturing conditions on physical properties of integrated gasification combined cycle (IGCC) slag geopolymer", Journal of Ceramic Processing Research, 18(3), pp.214~219 (2017), 청정에너지연구소[DOI]
- G. H. Lim, , J. Rec. Const. Res, 4, pp.418~424 (2016)
- J. Davidovits, , Proceeding of the 95th Annual Meeting of The American Ceramic Society, pp.1654~ (1993)
- J. Davidovits, , J. Thermal Analysis, 37, pp.1633~1656 (1991)
- F. G. M. Aredes, , Ceram. Int, 41, pp.7302~7311 (2015)
- J. G. S. van Jaarsveld, , Ind. Eng. Chem. Res, 38, pp.3932~3941 (1999)
- A. Autef, , J. Non-Cryst. Solids, 358, pp.2886~2893 (2012)
- G. Habert, , J. Clean. Prod, 19, pp.1229~1238 (2011)
- R. Kajaste, , J. Cleaner Prod, 112, pp.4041~4051 (2016)
- Y. Kim, "Kim, Annual research report to NRF (National Research Foundation of Korea), No. NRF-2018R1D1A1B07044819(2019)", ~
- Minjeong Kim, "Control of the microstructure of lightweight geopolymer by pressure control", Journal of Ceramic Processing Research, 22(2), pp.158~168 (2021), 청정에너지연구소[DOI]
- Y. Kim, , Int'l J. Mech. Product'n Eng, 8, pp.47~51 (2020)
- W. K. W. Lee, , Langmuir, 19, pp.8726~8734 (2003)
- 김유택, "Fabrication of porous geopolymer using fused slag with silicon sludge", Journal of Ceramic Processing Research, 17(11), pp.1202~1207 (2016), 청정에너지연구소[DOI]