본문 바로가기
KERD
논문KCI 등재

Concrete with sisal fibered geopolymer: a behavioral study

Muthupandy Varuthaiya|Chandrasekaran Palanisamy|Vivek Sivakumar|Ganeshan Pushpanathan
청정에너지연구소 (Clean-Energy Research Institute)|2022.12|Journal of Ceramic Processing Research|제23권 제6호|pp. 912-919|DOI 10.36410/jcpr.2022.23.6.912

0

조회

0

다운로드

4

인용

0

참고문헌

키워드

Mechanical propertiesEco-friendly geopolymer concreteSisal fiber
주제분류재료공학

초록

Globally, the greenhouse gas effect is a serious environmental concern. The cement sector is responsible for 5-8% of globalgreenhouse gas emissions. Geopolymer concrete is a low-carbon, low-sulfur alternative to traditional Portland cement concrete. Geopolymer concrete is created when alumino-silicate minerals react with alkaline liquids. The sisal fiber can be utilized toimprove the inherent qualities of Geopolymer concrete. The main purpose of this research is to look at the behavior of sisalfibered geopolymer concrete in several trials and show how it differs from regular Portland cement concrete. The fiber hasoptimal fiber content, according to the test results.

Abstract

Globally, the greenhouse gas effect is a serious environmental concern. The cement sector is responsible for 5-8% of globalgreenhouse gas emissions. Geopolymer concrete is a low-carbon, low-sulfur alternative to traditional Portland cement concrete. Geopolymer concrete is created when alumino-silicate minerals react with alkaline liquids. The sisal fiber can be utilized toimprove the inherent qualities of Geopolymer concrete. The main purpose of this research is to look at the behavior of sisalfibered geopolymer concrete in several trials and show how it differs from regular Portland cement concrete. The fiber hasoptimal fiber content, according to the test results.

참고문헌 (23)

  1. G. E. Arunkumar, "Effect of Temperature Stress on The Strength Properties of GGBS-Based Geopolymer Concrete", Polish Journal of Environmental Studies, 30(2), pp.1129~1137 (2021)
  2. K. Athiappan, "Experimental study on flexural behavior of Sisal fiber in reinforced concrete beam", International Journal of Engineering Research and Technology, 3(5), pp.1500~1505 (2014)
  3. G. Deepak Kumar, "A Review on the Mechanical Properties of Different Types of Geopolymer Concrete", International Journal for Scientific Research & Development, 5(1), pp.1116~1118 (2017)
  4. S. Velusamy, "Comparative Analysis of Agro Waste Material Solid Biomass Briquette for Environmental Sustainability", Advances in Materials Science and Engineering (2012)
  5. N. Ganesan, "Durability characteristics of steel fibre reinforced geopolymer concrete", Construction and Building Materials, 93, pp.471~476 (2015)
  6. S. K. Maniarasan, "Fly Ash Based Self-Cleaning Geopolymer Concrete Using Nanotechnology-A Review", International Journal of Scientific & Technology Research, 9(2), pp.1631~1639 (2020)
  7. S. Vajje, "Study on addition of the Natural fibers into concrete", International Journal of Scientific and Technology Research, 2(11), pp.213~218 (2013)
  8. A.R. Krishnaraja, "Performance of polyvinyl alcohol and polypropylene fibers under simulated cementitious composites pore solution", Advances in Materials Science and Engineering (2022)
  9. S. R. Murugesan, "Biosorption of Malachite Green from Aqueous Phase by Tamarind Fruit Shells Using FBR", Advances in Materials Science and Engineering, 2022, pp.00~07 (2022)
  10. D. Satheesh, "Experimental Investigation on Geopolymer Concrete", International Journal of Advanced Science and Engineering Research, 3(1), pp.63~69 (2018)
  11. S. H. Sanni, "Performance of Alkaline Solutions on Grades of Geopolymer Concrete", International Journal of Research in Engineering and Technology, IC-RICE Conference I, 2(11), pp.366~371 (2013)
  12. M.S. Shetty, "Concrete Technology" (2012), S. Chand and Company Pvt Ltd
  13. S. S. Bidwe, "Effect of different molarities of Sodium Hydroxide solution on the strength of Geopolymer concrete", American Journal of Engineering Reasearch, 4(3), pp.139~145 (2015)
  14. S. S. Ilamvazhuthi, "Performance of Geopolymer Concrete with Polypropylene Fibres", International Journal of Innovations in Engineering and Technology, 3(2), pp.148~155 (2013)
  15. R. Prabhu, "Experimental Research on Triple Blended Self-Compacting Geo Polymer Concrete", Asian Journal of Engineering and Applied Technology, 5(2), pp.15~21 (2016)
  16. S. Vivek, "Experimental Research on Concrete by using Red Mud, Foundry Sand, Conplast SP430 -as a Partial Replacement of Fine Aggregates", International Journal of ChemTech Research, 10(8), pp.739~749 (2017)
  17. T. Sen, "Application of Sisal, Bamboo, Coir and Jute Natural Composites in Structural Upgradation", International Journal of Innovation, Management and Technology, 2(3), pp.186~191 (2011)
  18. K. Uma, "Experimental investigation and analytical modeling of reinforced Geopolymer concrete beam", International Journal of Civil and Structural Engineering, 2(3), pp.817~827 (2012)
  19. Jihwan Won, "Dependence of alkali activator coating on aggregates upon mechanical strength of geopolymer", aggregates composites, 2017, pp.18(2), 166~171[DOI]
  20. Yootaek Kim, "Effects of manufacturing conditions on physical properties of integrated gasification combined cycle (IGCC) slag geopolymer", Journal of Ceramic Processing Research, 18(3), pp.214~219 (2017), 청정에너지연구소[DOI]
  21. S. Kavipriya, "Flexural strength of Lightweight geopolymer concrete using sisal fibres", Materials Today, 47(15), pp.5503~5507 (2021)
  22. G. Zila, "Sustainable geopolymer composite reinforced with sisal fiber:Durability to wetting and drying cycles", Journal of Building Engineering, 43, pp.102568~ (2021)
  23. A. N. Arasu, "Experimental analysis of waste foundry sand in partial replacement of fine aggregate in concrete", International Journal of Chem Tech Research Coden, 10(8), pp.605~622 (2017)

관련 논문AI추천

Mechanical and microstructural performance of engineered geopolymer cementitious composites embedded with activated slagK. Pradeep, S. Kavipriya, S. Southamirajan청정에너지연구소 · Journal of Ceramic Processing Research2025 · 제26권 제1호The effect of SiO2 on the performance of inorganic sludge-based structural concretes이종국, 황규홍, Min Sik Jang, Na Ra Ha, Zheng Xun Yang청정에너지연구소 · Journal of Ceramic Processing Research2009 · 제10권 제3호Influence of ceramic waste powder (CWP) in strength and durability performance of coir fiber reinforced concreteA.R. Krishnaraja, P.C. Murugan, P. Kulanthaivel, S. Anandaraj청정에너지연구소 · Journal of Ceramic Processing Research2024 · 제25권 제1호Application of ceramic waste aggregates in fly ash, metakaolin, and silica fume based geopolymer concreteC. Chinnaraj, K. Subramanian, P. Muthupriya청정에너지연구소 · Journal of Ceramic Processing Research2024 · 제25권 제3호Flexural and durability performance of alkaline resistance glass fiber and basalt fiber in fiber reinforced concreteD. Mythili, R. Murugesan, S. Christian Johnson청정에너지연구소 · Journal of Ceramic Processing Research2024 · 제25권 제4호Mechanical performance of mono and hybrid synthetic fibers engineered cementitious composites with silica fumeK. Yuvaraj, M. Dhivakar Karthick, M. Sakthivel, M. Veerapathran, S. Gowtham, T. Pradeep청정에너지연구소 · Journal of Ceramic Processing Research2024 · 제25권 제2호

이 간행물의 다른 논문 (25건)

Microstructural evolution of chemically vapor-deposited tantalum carbide at elevated temperatuJangwon Han, SangMin Jeong, Ji Yeon Park, Hyun-Geun Lee, Weon-Ju Kim, Chan Park, Daejong Kimpp. 751-757Coloring mechanism of celadon glazes from Yaozhou kilnFen Wang, Jing Wang, Zhen Sang, Xiaojuan Yuan, Shurui Shen, Xiaohong Weipp. 758-765Effect of the mixing ratio of positive materials of an electrode on the electrical properties in a battery capacitorJung-Rag Yoon, Won-su Lee, Kang-Min Choi, Jong-Kyu Leepp. 766-769Study on grain growth and conduction mechanism of spinel nickel ferrite ceramicsHongjuan Li, Baogang Liu, Min Tang, Xiang Weipp. 770-773Effect of Al modified Li4Ti5O12 anode/activated carbon cathode for advanced hybrid supercapacitorsYe-Wan Yoo, 이승환, 임인호pp. 774-777
원문 보기