본문 바로가기
KERD
논문KCI 등재

Research progress on the interfacial phases of ceramic matrix composites

Weina Guo|Yantao Gao
청정에너지연구소 (Clean-Energy Research Institute)|2023.04|Journal of Ceramic Processing Research|제24권 제2호|pp. 379-389|DOI 10.36410/jcpr.2023.24.2.379

1

조회

0

다운로드

3

인용

0

참고문헌

키워드

InterfaceOptimizationDevelopment.PreparationCMCs
주제분류재료공학

초록

Continuous fiber toughened ceramic matrix composites (CMCs) have a wide range of applications in fields of aerospacevehicles and nuclear power plants because of their excellent properties. As one of the basic components of CMCs, theinterfacial phase plays a great role in the performance of CMCs. By adjusting the interfacial phase, the tougheningmechanisms such as fiber pull-out and debonding of CMCs can be brought into full play. The paper introduced the designprinciples of interfacial engineering of CMCs. The methods of interfacial preparation and interfacial strength testing of CMCswere summarized, and then the advantages and disadvantages of each methods were analyzes. The recent status of interfacephase of CMCs was also reviewed. Finally, the development direction of interface phase of CMCs was prospected.

Abstract

Continuous fiber toughened ceramic matrix composites (CMCs) have a wide range of applications in fields of aerospacevehicles and nuclear power plants because of their excellent properties. As one of the basic components of CMCs, theinterfacial phase plays a great role in the performance of CMCs. By adjusting the interfacial phase, the tougheningmechanisms such as fiber pull-out and debonding of CMCs can be brought into full play. The paper introduced the designprinciples of interfacial engineering of CMCs. The methods of interfacial preparation and interfacial strength testing of CMCswere summarized, and then the advantages and disadvantages of each methods were analyzes. The recent status of interfacephase of CMCs was also reviewed. Finally, the development direction of interface phase of CMCs was prospected.

참고문헌 (95)

  1. R. Naslain, , Compos. Sci. Technol, 64(2), pp.155~170 (2004)
  2. N. A. Nasiri, , J. Eur. Ceram. Soc, 36(14), pp.3293~3302 (2016)
  3. H. Liu, , J. Mater. Eng, 46(11), pp.1~12 (2018)
  4. X. W. Yin, , Int. Mater. Rev, 62(3), pp.117~172 (2017)
  5. W. Krenkel, , Mater. Sci. Eng, 412(1), pp.177~181 (2005)
  6. Q. S. Ma, , J. Inorg. Mater, 28(3), pp.247~255 (2013)
  7. H. B. Guo, , J. Mater. Eng, 17(5), pp.83~88 (2013)
  8. J. H. Miller, , Mater. Sci. Eng. A, 317(49), pp.49~58 (2001)
  9. R. Naslain, , J. Am. Ceram. Soc, 74(10), pp.2482~2488 (1991)
  10. R. R. Naslain, , Composites Part A, 29(9-10), pp.1145~1155 (1998)
  11. Y. F. Zhang, , J. Inorg. Mater, 10(2), pp.231~235 (1995)
  12. H. P. Qiu, , Bull. Chin. Ceram. Soc, 1, pp.63~65 (2006)
  13. Q. Zhou, , J. Inorg. Mater, 22(6), pp.1142~1146 (2007)
  14. G. F. Lu, , J. Chin. Ceram. Soc, 40(8), pp.1169~1173 (2012)
  15. L. Longbiao, , Compos. Interface, 27(6), pp.551~557 (2020)
  16. J. Zhang, , J. Eur. Ceram. Soc, 39(15), pp.4609~4616 (2019)
  17. K. K. Chawla, , J. Eur. Ceram. Soc, 28(2), pp.447~453 (2008)
  18. S. Daggumati, , J. Mater. Eng. Perform, 29(4), pp.2049~2060 (2020)
  19. L. Li, , Ann. Mater. Sci. Eng, 2020, pp.1~17 (2020)
  20. D. Congalton, , Fire Mater, 23(5), pp.223~226 (1999)
  21. F. W. Zok, , J. Am. Ceram. Soc, 89(11), pp.3309~3324 (2006)
  22. X. W. Yin, , Int. Mater. Rev, 62(3), pp.117~172 (2017)
  23. K. Chawla, , Int. Mater. Rev, 45(5), pp.165~189 (2000)
  24. V. Sabelkin, , J. Compos. Mater, 50(16), pp.2145~2153 (2016)
  25. Q. Ma, , J. Adv. Ceram, 6(4), pp.360~367 (2017)
  26. L. Li, , Ceram. Int, 46(17), pp.27031~27045 (2020)
  27. S. Jacques, , J. Solid State Chem, 162(2), pp.358~363 (2001)
  28. S. Jacques, , J. Eur. Ceram. Soc, 20(12), pp.1929~1938 (2000)
  29. H. Hannache, , J. Mater. Sci, 19(1), pp.202~212 (1984)
  30. C. Y. Hu, , J. Rare Met, 25(5), pp.364~368 (2001)
  31. H. P. Zhang, , Carbon Tech, 23(5), pp.1~5 (2004)
  32. Y. Z. Zhu, , New Carbon Mater, 22(4), pp.327~331 (2007)
  33. Y. Xiang, , Mater. Sci. Eng, 558, pp.451~455 (2012)
  34. Y. Z. Zhu, , Ceram. Int, 34(5), pp.1201~1205 (2008)
  35. H. T. Liu, , Carbon, 109, pp.435~443 (2016)
  36. D. Ding, , Ceram. Int, 38(5), pp.3929~3934 (2012)
  37. T. Taguchi, , J. Phys. Chem. Solids, 66(2-4), pp.576~580 (2005)
  38. R. A. Caruso, , Adv. Mater, 13(20), pp.1577~1579 (2001)
  39. M. K. Cinibulk, , J. Am. Ceram. Soc, 79(5), pp.1233~1246 (1996)
  40. V. Liedtke, , J. Eur. Ceram. Soc, 27(2-3), pp.1267~1272 (2007)
  41. S. M. Jeng, , J. Mater. Res, 8(4), pp.905~916 (1993)
  42. I. J. Davies, , Composites Part A, 30(4), pp.587~591 (1999)
  43. I. J. Davies, , J. Eur. Ceram. Soc, 25(5), pp.599~604 (2005)
  44. J. Brandstetter, , Compos. Sci. Technol, 63(5), pp.653~660 (2003)
  45. S. Bertrand, , J. Am. Ceram. Soc, 82(9), pp.2465~2473 (1999)
  46. C. Sauder, , Int. J. Appl. Ceram. Technol, 7(3), pp.291~303 (2010)
  47. G. N. Morscher, , J. Am. Ceram. Soc, 82(1), pp.145~155 (1999)
  48. E. Buet, , J. Eur. Ceram. Soc, 34(2), pp.179~188 (2014)
  49. W. M. Mueller, , J. Eur. Ceram. Soc, 33(2), pp.441~451 (2013)
  50. M. Rodriguez, , Compos. Sci. Technol, 72(15), pp.1924~1932 (2012)
  51. H. T. Liu, , Carbon, 109, pp.435~443 (2016)
  52. H. T. Liu, , J. Eur. Ceram. Soc, 37(3), pp.883~890 (2017)
  53. L. W. Yang, , Composites Part B, 119, pp.79~89 (2017)
  54. D. W. McKee, , Carbon, 22(6), pp.507~511 (1984)
  55. S. Jacques, , Carbon, 34(9), pp.1135~1143 (1996)
  56. H. R. Wang, , Ceram. Int, 46(14), pp.22297~22306 (2020)
  57. L.H. Cai, , Bull. Chin. Ceram. Soc, 32(5), pp.878~883 (2013)
  58. F. Rebillat, , Acta Mater, 48(18), pp.4609~4618 (2000)
  59. S. Jacques, , J. Eur. Ceram. Soc, 20(12), pp.1929~1938 (2000)
  60. S. Jacques, , Ceram. Eng. Sci. Proc, 25(4), pp.123~128 (2008)
  61. A. W. Moore, , Ceram. Eng. Sci. Proc, 16(4), pp.409~416 (1995)
  62. G. N. Morscher, , J. Eur. Ceram. Soc, 22(14-15), pp.2777~2787 (2002)
  63. G. N. Morscher, , Ceram. Eng. Sci. Proc, 18(3), pp.737~745 (1997)
  64. Y. M. Qin, , Corros. Sci, 204, pp.110411~ (2022)
  65. Y. Q. Wang, , Compos. Manuf, 6(2), pp.103~106 (1995)
  66. S. Bertrand, , J. Am. Ceram. Soc, 84(4), pp.787~794 (2001)
  67. S. Bertrand, , Adv. Compos. Lett, 8(6), pp.1~7 (1999)
  68. S. Bertrand, , Key Eng. Mater, 164-165, pp.357~360 (1999)
  69. O. Rapaud, , J. Mater. Sci, 39(1), pp.173~180 (2004)
  70. H. Li, , J. Am. Ceram. Soc, 87(9), pp.1726~1733 (2004)
  71. S. Parola, , J. Sol-Gel Sci. Technol, 26(1), pp.803~806 (2003)
  72. M. Verdenelli, , J. Eur. Ceram. Soc, 23(8), pp.1207~1213 (2003)
  73. N. Igawa, , J. Nucl. Mater, 367-370, pp.725~729 (2007)
  74. W. Y. Lee, , J. Am. Ceram. Soc, 81(3), pp.717~720 (1998)
  75. H. Li, , J. Am. Ceram. Soc, 87(9), pp.1726~1733 (2004)
  76. N. I. Baklanova, , J. Eur. Ceram. Soc, 27(1), pp.165~171 (2007)
  77. N. 1. Baklanova, , J. Eur. Ceram. Soc, 27(6), pp.2503~2511 (2007)
  78. N. 1. Baklanova, , J. Eur. Ceram. Soc, 28(8), pp.1687~1696 (2008)
  79. A. V. Utkin, , Inorg. Mater, 47(10), pp.1066~1071 (2011)
  80. A. V. Utkin, , Surf. Coat. Technol, 205(8-9), pp.2724~2729 (2011)
  81. N. 1. Baklanov, , J. Eur. Ceram. Soc, 26(9), pp.1725~1736 (2006)
  82. Y. Xu, , Ceram. Int, 43(8), pp.5847~5855 (2017)
  83. Y. Hikichi, , J. Am. Ceram. Soc, 70(10), pp.C252~C253 (1987)
  84. R. M. Hazen, , J. Phys. Chem. Solids, 46(2), pp.253~263 (1985)
  85. Y. H. Bao, , J. Am. Ceram. Soc, 89(2), pp.465~470 (2010)
  86. M. W. Barsoum, , Am. Sci, 89(4), pp.334~344 (2001)
  87. Y. Z Ma, , Mat. Sci. Eng. A, 712, pp.397~405 (2018)
  88. M. Li, , J. Am. Ceram. Soc, 101(11), pp.5269~5280 (2018)
  89. H. Fakih, , J. Phase Equilib. Diffus, 29(3), pp.239~246 (2008)
  90. S. Jacques, , Thin Solid Films, 518(18), pp.5071~5077 (2010)
  91. K. A. Keller, , J. Am. Ceram. Soc, 86(2), pp.325~332 (2003)
  92. E. E. Boakye, , J. Am. Ceram. Soc, 99(2), pp.415~423 (2015)
  93. P. Mogilevsky, , Acta Mater, 52(19), pp.5529~5537 (2004)
  94. B. B. Wu, , 2801~2810 (2020)
  95. B. B. Wu, , Ceram. Int, 47(2), pp.1693~1703 (2021)

관련 논문AI추천

Review on interfacial properties of SiCf/SiC composites for gas turbine enginesHo Gyu Yoon, Kyoon Choi, Young-Seok Jeong청정에너지연구소 · Journal of Ceramic Processing Research2023 · 제24권 제5호The effects of pyrolytic carbon interphase thickness on the properties of hot-pressed SiCf/SiC compositesAlfian Noviyanto청정에너지연구소 · Journal of Ceramic Processing Research2012 · 제13권 제4호Characterization of the matrix phase of whisker growing-assisted CVI-SiCf/SiC compositesJi Yeon Park, Seok Min Kang, Weon-Ju Kim청정에너지연구소 · Journal of Ceramic Processing Research2009 · 제10권 제3호Thermal and mechanical properties of C/SiC composites fabricated by liquid silicon infiltration with nitric acid surface-treated carbon fibersHyung Joon Bang, In-Sub Han, Jae Hyung Choi, Seyoung Kim, Soo-Hyun Kim, Young-Hoon Seong청정에너지연구소 · Journal of Ceramic Processing Research2019 · 제20권 제1호다양한 섬유강화 구조를 갖는 NITE-SiC/SiC 복합재료의 층간 강도 특성 연구김종일한국분말재료학회 · 한국분말재료학회지2024 · 제31권 제5호Fabrication of cross-ply Cf/C-SiC composites and the investigation of pyrolysis conditions on their properties카티라주, InSubHan, Se Young Kim, Soo-Hyun Kim, Young-Hoon Seong청정에너지연구소 · Journal of Ceramic Processing Research2020 · 제21권 제1호

이 간행물의 다른 논문 (24건)

Homogeneous distribution and quantitative evaluation of sintering additives in spray-dried silicon nitride granulesHyun-Kwuon Lee, Kati Raju, Tae-Gyeong Kimpp. 211-215Comparative study of WC-Co-VC-Cr3C2 cemented carbide by spark plasma sintering: densification, microstructure,and mechanical propertiesBum-Soon Park, Hyun-Kuk Park, Jeong-Han Lee, Jae-Cheol Parkpp. 216-221Synthesis, characterization, and dielectric properties of SBN ferroelectric matrix doped with Eu2O3Noureddine Elbinna, Anasser Imane, Zegzouti Abdelouahad, Elaatmani Mohamed, Daoud Mohamedpp. 222-229Ultrashort pulse laser processing of ZrO2 ceramicsDun Liu, Deyuan Lou, Yutao Wang, Qibiao Yang, Yunhan You, Bojin Cheng, Lie Chen, Jian Chengpp. 230-236The use of alternative raw material as a fluxing agent in hard porcelain bodiesH. Yildizaypp. 237-241
원문 보기