Study on electrical conductivity and flow properties of ceramic inks for ceramic surface pattern design
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study focuses on the development and characterization of ceramic inks for inkjet printing with ceramic surface patterns,in particular the examination of their conductivity, surface tension and shear viscosity. Three distinct colored ceramicinks were prepared, each with varying compositions to explore their potential for effective ink-jet printing. The electricalconductivity of the inks was measured to assess their suitability for producing consistent and high-quality prints. Surfacetension measurements were conducted to ensure proper ink behavior during the printing process, while shear viscosity wasanalyzed to determine the flow characteristics essential for avoiding nozzle clogging and ensuring smooth application. Resultsindicate that the prepared ceramic inks exhibit electrical conductivities within an acceptable range for ink-jet printing,demonstrating their potential for producing electrically conductive ceramic components. Surface tension values were foundto be within the optimal range for ink-jet applications, ensuring good droplet formation and deposition. Shear viscositymeasurements show that the surface pattern ink has proper flow, and all three colors show a stable viscosity suitable forhigh-resolution printing.
Abstract
This study focuses on the development and characterization of ceramic inks for inkjet printing with ceramic surface patterns,in particular the examination of their conductivity, surface tension and shear viscosity. Three distinct colored ceramicinks were prepared, each with varying compositions to explore their potential for effective ink-jet printing. The electricalconductivity of the inks was measured to assess their suitability for producing consistent and high-quality prints. Surfacetension measurements were conducted to ensure proper ink behavior during the printing process, while shear viscosity wasanalyzed to determine the flow characteristics essential for avoiding nozzle clogging and ensuring smooth application. Resultsindicate that the prepared ceramic inks exhibit electrical conductivities within an acceptable range for ink-jet printing,demonstrating their potential for producing electrically conductive ceramic components. Surface tension values were foundto be within the optimal range for ink-jet applications, ensuring good droplet formation and deposition. Shear viscositymeasurements show that the surface pattern ink has proper flow, and all three colors show a stable viscosity suitable forhigh-resolution printing.
참고문헌 (15)
- J. H. Park, , J. Korean Ceram. Soc, 56(5), pp.461~467 (2019)
- P. Gingter, , J. Ceram. Sci. Technol, 6(2), pp.119~124 (2015)
- D. Herzog, "Additive Manufacturing of Metals", Acta Mater, 117, pp.371~392 (2016)
- D. Herzog, , Acta Mater, 117, pp.371~392 (2016)
- G. Rivers, , Addit. Manuf, 66, pp.103452~ (2023)
- N. T. Brannelly, , Electroanalysis, 29(1), pp.162~171 (2017)
- E. Bihar, , Adv. Mater. Technol, 5, pp.2000226~ (2020)
- G. F. Trindade, , Commun. Mater, 2(1), pp.47~ (2021)
- C. A. Lamont, , Org. Electron, 17, pp.107~114 (2015)
- Y. Galagan, , Chem. Eng. Process. Process Intensif, 50, pp.454~ (2011)
- F. Wu, , J. Phys. Chem. C, 117, pp.8691~ (2013)
- M. A. Green, , Prog. Photovoltaics, 22, pp.701~ (2014)
- W. J. E. Beek, , J. Phys. Chem. B, 109, pp.9505~ (2005)
- S. D. Hoath, , J. Rheol, 56, pp.1109~ (2012)
- Y. Galagan, , Chem. Eng. Process. Process Intensif, 50, pp.454~ (2011)