Impact of heat treatment on mechanical and tribological properties of metal matrix composites of AA6082 T6 with Tin, Zinc and graphite
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this research article, the metal matrix composite with AA6082 was formed with mono Tin (5 wt%), Zinc (5 wt%), graphite(5 wt%) and hybrid. The solution heat treatment process and quenching with water and solidification were carried out andresults were compared with AA6082 T6. The different analysis includes mechanical properties (Tensile strength, microhardness), metallurgical properties (SEM and EDX) and tribological property (friction and wear). Micro structure of heattreated AA6082 MMC found with lower defects and fine grain size. Hardness values of heat treated AA6082+Zinc(A6) andhybrid AA6082(A8) found higher than AA6082 T6. The ultimate tensile strength of heat treated AA6082+Zinc(A6) and hybridAA6082(A8) observed higher than AA6082 T6. The wear and friction rate also reduced with heat treated AA6082+Zinc andAA6082 hybrid metal matrix composites.
Abstract
In this research article, the metal matrix composite with AA6082 was formed with mono Tin (5 wt%), Zinc (5 wt%), graphite(5 wt%) and hybrid. The solution heat treatment process and quenching with water and solidification were carried out andresults were compared with AA6082 T6. The different analysis includes mechanical properties (Tensile strength, microhardness), metallurgical properties (SEM and EDX) and tribological property (friction and wear). Micro structure of heattreated AA6082 MMC found with lower defects and fine grain size. Hardness values of heat treated AA6082+Zinc(A6) andhybrid AA6082(A8) found higher than AA6082 T6. The ultimate tensile strength of heat treated AA6082+Zinc(A6) and hybridAA6082(A8) observed higher than AA6082 T6. The wear and friction rate also reduced with heat treated AA6082+Zinc andAA6082 hybrid metal matrix composites.
참고문헌 (19)
- S. Manasijevic, "Bureau for Graphic Engineering of the Faculty of Technology and Metallurgy University of Belgrade" (2009), LOLA Institute
- G. Singh, , Proc. Inst. Mech. Eng., Part L, 232, pp.952~964 (2018)
- A. Thangarasu, , Emerging Mater. Res, 3, pp.123~129 (2014)
- C. Kalra, , J. Mater. Environ. Sci, 9(7), pp.1979~1986 (2018)
- C. A. V. Kumar, , J. Mater. Res, 31(16), pp.2445~2456 (2016)
- L. Lu, , Scripta Materilia, 45, pp.1017~1023 (2001)
- A. Shafiei-Zarghani, , Wear, 270, pp.403~412 (2011)
- G. Singh, , J. Braz. Soc. Mech. Sci. Eng, 40, pp.310~ (2018)
- G. S. Saini, , Nano Hybrids and Composites, 16, pp.26~29 (2017)
- P. Sharma, , J. Mater. Res. Technol, 5(1), pp.29~36 (2016)
- R. Palanivel, , Mater. Design, 106, pp.195~204 (2016)
- P. Sharma, , J. Mater. Sci., 2(4) (2015)
- P. Sharma, , Aust. J. Mech. Eng (2020)
- Kanakaraj A, "Parametric optimization of wear parameters on wear rate and coefficient of friction for hybrid (A356 +TiB2+ ZrO2) metal matrix composites", Journal of Ceramic Processing Research, 23(3), pp.268~277 (2022), 청정에너지연구소[DOI]
- Jeong-Han Lee, "Microstructural evolution and mechanical properties of TiC-Mo2C-WC-Ni multi-component powder by high energy ball milling", Journal of Ceramic Processing Research, 22(5), pp.590~596 (2021), 청정에너지연구소[DOI]
- M. Manoj, "Synthetization and investigation on mechanical characteristics of aluminium alloy 7075 with TiB2 composite", Journal of Ceramic Processing Research, 22(4), pp.475~481 (2021), 청정에너지연구소[DOI]
- Umar Mohamed J., "Influences of ZrO2 and B4C reinforcement on metallurgical, mechanical, and tribological properties of AA6082 hybrid composite materials", Journal of Ceramic Processing Research, 22(3), pp.306~316 (2021), 청정에너지연구소[DOI]
- İsmail Topcu, "Examination of wear properties of Al", B4C composites reinforced with irregularly shaped B4C, 2021, pp.22(3), 276~282[DOI]
- R. Srinivasan, "Optimization of friction stir welding process parameters on AA 6063-SiC-B4C hybrid metal matrix composites by genetic algorithm", Journal of Ceramic Processing Research, 22(1), pp.16~24 (2021), 청정에너지연구소[DOI]