An analysis of ceramic tool condition monitoring for enhanced and secured manufacturing
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
In metal cutting tool wear is complex phenomenon which occurs in several ways and it could not be avoided. Due to the hightool wear rate the close dimensional accuracy of the parts are not achieved and as a result the manufacturing execution systemfails in sending secured data to the systems properly. High security data transmission is essential in manufacturing executionsystem. Various algorithms are used for cryptography in the today’s market for securing the data. This paper employs aceramic tool for machining Inconel 718 to obtain close dimensional tolerance and thereby enhancing the secured data transfereffectively. The novelty of the work is incorporating the ceramic tool in the turning process and there by improving the secureddata transmission in the industrial automaiton. The outcome of the work is to measure the accuracy and precision of themachined parts from the ceramic cutting tool and to find the comparative improvement in the usage of several algorithms usedin enhanced secured data transmission.
Abstract
In metal cutting tool wear is complex phenomenon which occurs in several ways and it could not be avoided. Due to the hightool wear rate the close dimensional accuracy of the parts are not achieved and as a result the manufacturing execution systemfails in sending secured data to the systems properly. High security data transmission is essential in manufacturing executionsystem. Various algorithms are used for cryptography in the today’s market for securing the data. This paper employs aceramic tool for machining Inconel 718 to obtain close dimensional tolerance and thereby enhancing the secured data transfereffectively. The novelty of the work is incorporating the ceramic tool in the turning process and there by improving the secureddata transmission in the industrial automaiton. The outcome of the work is to measure the accuracy and precision of themachined parts from the ceramic cutting tool and to find the comparative improvement in the usage of several algorithms usedin enhanced secured data transmission.
참고문헌 (21)
- A. Devillez, , Wear, 262(7), pp.931~942 (2007)
- D.G. Thakur, , Int. J. Adv. Manuf. Technol, 50(5-8), pp.471~478 (2010)
- E. O. Ezugwu, , J. Mater. Process. Technol, 153, pp.1045~1050 (2004)
- N. Fang, , Int. J. Adv. Manuf. Technol, 52(1-4), pp.65~77 (2011)
- I. A. Choudhury, , J. Mater. Process. Technol, 77(1), pp.278~284 (1998)
- M. Rahman, , J. Mater. Process. Technol, 63(1), pp.199~204 (1997)
- V. Rao, , J. Ambient Intell. Humaniz. Comput, 12(9), pp.8835~8857 (2021)
- A. Mosteiro-Sanchez, , J. Manuf. Syst, 57, pp.367~378 (2020)
- X. Yao, , IEEE Trans. Industr. Inform, 15(4), pp.2297~2307 (2019)
- B. Cambou, , J. Cryptol, 4(2), pp.17~ (2020)
- M. Buvana, , Turk. J. Comput. Math. Educ, 12(2), pp.459~464 (2021)
- W. S. Yip, , J. Intell. Manuf, pp.1~13 (2021)
- A. Caggiano, , Int. J. Comput. Integr. Manuf, 31(7), pp.612~623 (2018)
- R. Gao, , CIRP Annals, 64(2), pp.749~772 (2015)
- J. -D. Kim, , Int. J. Mach. Tools Manuf, 36(8), pp.861~870 (1996)
- J. Thakur, , Int. J. Emerg. Technol, 1(2), pp.6~12 (2011)
- M. Srinivasan, "Minimization of delamination, surface roughness and thrust force in drilling of Al2O3 ceramic particle filled CFRP composites", Journal of Ceramic Processing Research, 22(3), pp.345~355 (2021), 청정에너지연구소[DOI]
- İsmail Topcu, "Mechanical properties of PLA and ABS parts produced with fused filament fabrication method", Journal of Ceramic Processing Research, 22(2), pp.143~148 (2021), 청정에너지연구소[DOI]
- Muhammet Ceylan, "Wear behavior of irregular shape Ti6Al4V powder reinforced with carbon nanotubes", Journal of Ceramic Processing Research, 21(5), pp.539~546 (2020), 청정에너지연구소[DOI]
- J.D. Kim, , Int. J. Mach. Tools Manuf, 36(8), pp.861~870 (1996)
- M. Chandrasekaran, , Int. J. Adv. Manuf. Syst, 65(1-4), pp.239~250