Parameter optimization in Laser Beam Welding for Incoloy 825 Ni-based alloy and AISI 316L steel
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper investigates the comparative study on dissimilar joints of Incoloy 825 Ni-based alloy and AISI 316L steel. Thepaper explores process parameters such as laser focal diameter, strength, and pulse frequency of the above dissimilar platesin LBW welding. In order to explain the microstructural changes during welding, characterization was carried out by opticalmicroscopy and electron microscopy. In order to study the transformation of mechanical properties in solder joints, microhardnessand tensile tests are performed. Based on the research work, due to its less heat affected area, high power strength,and high repetition rate, laser beam welding has some advantages over other welding techniques. The Taguchi method is moreefficient for predicting the outcomes among different analytical and experimental optimization methods. Therefore, thisexperiment demonstrates that different metals' welding efficiency can fulfil the oil and gas sector standards and otherindustrial sectors.
Abstract
This paper investigates the comparative study on dissimilar joints of Incoloy 825 Ni-based alloy and AISI 316L steel. Thepaper explores process parameters such as laser focal diameter, strength, and pulse frequency of the above dissimilar platesin LBW welding. In order to explain the microstructural changes during welding, characterization was carried out by opticalmicroscopy and electron microscopy. In order to study the transformation of mechanical properties in solder joints, microhardnessand tensile tests are performed. Based on the research work, due to its less heat affected area, high power strength,and high repetition rate, laser beam welding has some advantages over other welding techniques. The Taguchi method is moreefficient for predicting the outcomes among different analytical and experimental optimization methods. Therefore, thisexperiment demonstrates that different metals' welding efficiency can fulfil the oil and gas sector standards and otherindustrial sectors.
참고문헌 (14)
- J. Kangazian, , J. Manuf. Process, 26, pp.407~418 (2017)
- J. Kangazian, , J. Manuf. Process, 29, pp.376~388 (2017)
- D. Aravindkumar, , Mater. Res. Express, 8(4), pp.046513~ (2021)
- S. Sharma, , Manuf. Technol. Today, 13(6), pp.20~29 (2014)
- J. P. Oliveira, , Mater. Des, 162, pp.229~234 (2019)
- N. Sayyar, , J. Mater. Process. Technol, 262, pp.562~570 (2018)
- N. R. Bijivemula, , Adv. Mater. Process. Technol, pp.1~16 (2021)
- N. Kumar, , Opt. Laser Technol, 94, pp.296~309 (2017)
- N. Ghosh, , ProcediaTechnol, 25, pp.1038~1048 (2016)
- M. R. Pakmanesh, , Opt. Laser Technol, 99, pp.30~38 (2018)
- P. Gopi Krishnan, "Optimization of process parameters in friction stir welding of aluminium matrix SiC-Al2O3 composites by genetic algorithm", Journal of Ceramic Processing Research, 21(2), pp.157~163 (2020), 청정에너지연구소[DOI]
- P. Gopi Krishnan, "Study on effect of welding speed on friction stir welded aluminium metal matrix hybrid composite", Journal of Ceramic Processing Research, 22(5), pp.483~489 (2021), 청정에너지연구소[DOI]
- Mathi Kannaiyan, "Process parameters and properties of electric resistance spot welded AISI304-AISI1020 dissimilar weldments", Journal of Ceramic Processing Research, 21(1), pp.26~34 (2020), 청정에너지연구소[DOI]
- R. Crushan, "Investigation of mechanical and metallurgical behaviour in FSW of AA5052-H32 and AA5083-H111 aluminium alloys", Journal of Ceramic Processing Research, 22(6), pp.620~628 (2021), 청정에너지연구소[DOI]