본문 바로가기
KERD
논문KCI 등재

시효처리가 복합레진 수복물의 미세누출에 미치는 영향에 관한 연구

The Effect of Aging Treatment for Microleakage within Composite Resin Restoration

유승훈
대한소아치과학회 (The Korean Academy Of Pediatric Dentistry)|2013.11|대한소아치과학회지 (Journal of the Korean academy of pediatric dentistry)|제40권 제4호|pp. 283-295|DOI http://dx.doi.org/10.5933/JKAPD.2013.40.4.283

0

조회

0

다운로드

1

인용

0

참고문헌

키워드

Dentin bonding agentMicroleakageComposite resin미세누출상아질 접착제시효처리MicroCT복합레진Aging treatment
주제분류치의학

초록

본 연구는 시효처리가 세 가지 상아질 접착제의 미세누출에 미치는 영향을 MicroCT를 이용하여 조사하였다. 5세대 상아질 접착제인 AdperTM Single bond Plus(3M-ESPE, USA)와 6세대 상아질 접착제인 AdheSE􀋓(Ivoclar Vivadent,Lichtenstein)와 AdperTM PromptTM L-PopTM(3M-ESPE, USA)을 이용하였다. 세 가지 상아질 접착제를 이용하여 3MESPE 사의 FiltekTM Z250을 V급 와동에 수복하고 24시간 생리식염수에 보관한 군(I군), 열 순환을 시행한 군(II군), 인공칫솔질 법을 적용한 군(III군), 인공 타액에 6개월간 보관한 군(IV군)으로 분류하였다. AdperTM Single bond Plus를 이용한 시편은 II군과 III군에서 미세누출의 양이 늘어났으며 IV군에서 감소하였다. I군에비해 II군이 많은 미세누출을 보였으며(p < 0.05), II군과 III군에 비하여 IV에서 적은 미세누출을 보였다(p < 0.05). AdheSE􀋓를 이용한 시편은 차이를 보이지 않았다(p > 0.05). AdperTM PromptTM L-PopTM을 이용한 시편은 차이를 보이지않았다(p > 0.05). I군에서는 AdheSE􀋓가 AdperTM Single bond Plus와 AdperTM PromptTM L-PopTM에 비해 미세누출이 많다(p < 0.05). II 군에서는 상아질 접착제간 차이가 없었다(p > 0.05). III군에서는 AdheSE􀋓가 AdperTM Single bond Plus와 AdperTM PromptTM L-PopTM에 비해 미세누출이 많았다(p < 0.05). IV군에서는 AdperTM Single bond Plus에 비해 AdheSE􀋓와AdperTM PromptTM L-PopTM의 미세누출이 많았다(p < 0.05).

Abstract

In this study, researchers tried to find the effect, if any, of aging treatment to the specimens with three different dentin bonding agents using MicroCT. One, 5th generation - [AdperTM Single bond Plus] and two 6th generation [AdheSE􀋓, AdperTM PromptTM L-PopTM] dentin bonding agents were used in this study. Specimens were divided into 4 groups according to aging treatment method used. Group I : control group,Group II : thermocycled between 5℃ and 55℃ for 60 seconds dwell time 5,000 times, Group III : aged as Group II and artificially brushed 20,000 times, Group IV : aged as Group III and were stored in artificial saliva for 6months. With Single bond Plus, Group II showed more microleakage than Group I (p < 0.05). Group II and Group III showed more microleakage than Group IV (p < 0.05). There were no statistically significant differences among the groups using AdheSE􀋓 and PromptTM L-PopTM (p > 0.05). Among Group I, AdheSE􀋓 showed more microleakage than Single bond Plus and PromptTM L-PopTM (p < 0.05). Among Group II, there were no statistically significant differences (p > 0.05). Among Group III, AdheSE􀋓 showed more microleakage than Single bond Plus and PromptTM L-PopTM (p < 0.05). Among Group IV, AdheSE􀋓 and PromptTM L-PopTM showed more microleakage than Single bond Plus (p < 0.05).

참고문헌 (52)

  1. Bayne SC, "Update on dental composite restorations", J Am Dent Assoc, 125, pp.687~701 (1994)
  2. Dauvillier BS, "Developments in shrinkage control of adhesive restoratives", J Esthet Dent, 12, pp.291~299 (2000)
  3. Davy KW, "Relationship between composite matrix molecular structure and properties", Biomaterials, 19, pp.2007~2014 (1998)
  4. Venhoven BA, "Poly-merization contraction and conversion of light curing Bis-GMA based methacrylate resins", Biomaterials, 14, pp.871~875 (1993)
  5. Venhoven BA, "Light initiation of dental resins : dynamics of the polymerization", Biomaterials, 17, pp.2313~2318 (1996)
  6. Li Y, "Effect of filler content and size on properties of composites", J Dent Res, 64, pp.1396~1401 (1985)
  7. Goldman M, "Polymerization shrinkage of resinbased restorative materials", Aust Dent J, 28, pp.156~161 (1983)
  8. Obici AC, "Effect of the photo-activation method on polymerization shrinkage of restorative composites", Oper Dent, 27, pp.192~198 (2002)
  9. Sakaguchi RL, "Stress transfer from polymerization shrinkage of a chemical-cured composite bonded to a pre-cast composite substrate", Dent Mater, 14, pp.106~111 (1998)
  10. Puckett AD, "Method to measure the polymerization shrinkage of light-cured composites", J Prosthet Dent, 68, pp.56~58 (1992)
  11. Bowen RL, "Adhesive bonding of various materials to hard tooth tissued ; forces developing in composite materials during hardening", J Am Dent Assoc, 106, pp.475~477 (1983)
  12. Bouschlicher MR, "Effect of stepped light intensity on polymerization force and conversion in a photoactivated composite", J Esthet Dent, 12, pp.23~32 (2000)
  13. Bouschlicher MR, "Effect of composite type, light intensity, configuration factor and laser polymerization on polymerization contraction forces", Am J Dent, 10, pp.88~96 (1997)
  14. Sakaguchi RL, "Strain gauge measurement of polymerization shrinakge", J Dent Res, 68, pp.977~ (1989)
  15. Ru¨ttermann S, "Polymerization shrinkage and hygroscopic expansion of contemporary posterior resin-based filling materialsa comparative study", J Dent, 35, pp.806~813 (2007)
  16. 김영광, "스트레인 게이지를 이용한 수종의 복합레진의 중합수축 및 수축응력의 비교", 대한소아치과학회지, 31(3), pp.516~526 (2004), 대한소아치과학회
  17. Ilie N, "Low-shrinkage composite for dental application", Dent Mater J, 26, pp.149~155 (2007)
  18. Buonocore MG, "A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces", J Dent Res, 34, pp.849~853 (1955)
  19. Davidson CL, "Polymerization shrinkage and polymerization shrinkage stress in polymerbased restoratives", J Dent, 25, pp.435~440 (1997)
  20. Eick JD, "Polymerization shrinkage of posterior composite resins and its possible influence on postoperative sensitivity", Quintessence Int, 17, pp.103~111 (1986)
  21. Feilzer AJ, "Curing contraction of composites and glass-ionomer cements", J Prosthet Dent, 59, pp.297~300 (1988)
  22. Suliman AH, "Polymerization shrinkage of composite resins : comparison with tooth deformation", J Prosthet Dent, 71, pp.7~12 (1994)
  23. Raskin A, "Reliability of in vitro microleakage tests: a literature review", J Adhes Dent, 3, pp.295~308 (2001)
  24. Wahab FK, "The effect of thermocycling on microleakage of several commercially available composite Class V restorations in vitro", J Prosthet Dent, 90, pp.168~174 (2003)
  25. Eden E, "Micro- CT for measuring marginal leakage of Class II resin composite restorations in primary molars prepared in vivo", Am J Dent, 21, pp.393~397 (2008)
  26. Rossomando KJ, "Thermocycling and dwell times in microleakage evaluation for bonded restorations", Dent Mater, 11, pp.47~51 (1995)
  27. Burgress JO, "Shear bond strength of five dental bonding agents", J Dent Res, 72, pp.387~ (1993)
  28. Kraivixien R, "Effect of aging on bond strength of dentin adhesives in vitro", J Dent Res, 72, pp.282~ (1993)
  29. Gary AC, "Effect of aging on microleakage of restorative systems", J Dent, 6, pp.192~194 (1993)
  30. Hirasawa T, "Initial dimensional change of composites in dry and wet conditions", J Dent Res, 62, pp.28~31 (1983)
  31. Choi, KK, "The effect of adhesive thickness on polymerization contraction stress of composite", J Dent Res, 79, pp.812~817 (2000)
  32. Pereira PN, "Relationship between bond strength and nanoleakage : Evaluation of a new assessment method", Am J Dent, 14, pp.100~105 (2001)
  33. Tay FR, "The overwet phe nomenon : A scanning electron microscopic study of surface moisture in the acid-conditioned, resiondentin interface", Am J Dent, 9, pp.109~114 (1996)
  34. Olmez A, "Microleakage of resin composite restorations with glass-ceramic inserts", Quintessence Int, 29, pp.725~729 (1998)
  35. Wendt SL, "The effect of thermocycling in microleakage analysis", Dent Mater, 8, pp.181~184 (1992)
  36. Frankenberger R, "Technique sensitivity of dentin bonding: effect of application mistakes on bond strength and marginal adaptation", Oper Dent, 25, pp.324~330 (2000)
  37. Frankenberger R, "Self-etch vs etch-andrinse adhesives: effect of thermo-mechanical fatigue loading on marginal quality of bonded resin composite restorations", Dent Mater, 21, pp.397~412 (2005)
  38. Gue′ders AM, "Microleakage after thermocycling of 4 etch and rinse and 3 self-etch adhesives with and without a flowable composite lining", Oper Dent, 31, pp.450~455 (2006)
  39. 유승훈, "Self-etching priming", bonding agent를 이용한 수복에서microleakage에 관한 연구, 2004, pp.31(1), 26~33[DOI]
  40. Frankenberger R, "“ Nobottle” vs “multi-bottle”dentin adhesives-a microtensile bond strength and morphological study", Dent Mater, 17, pp.373~380 (2001)
  41. Carvalho RM, "A review of polymerization contraction: the influence of stress development versus stress relief", Oper Dent, 21, pp.17~24 (1996)
  42. Braden M, "Diffusion of water in composite filling materials", J Dent Res, 55, pp.730~732 (1976)
  43. Yap AU, "Polymerization shrinkage of visible-light-cured composites", Oper Dent, 25, pp.98~103 (2000)
  44. Martin N, "Measurement of water sorption in dental composites", Biomaterials, 19, pp.77~83 (1998)
  45. Feilzer AJ, "Relaxation of polymerization contraction shear stress by hygroscopic expansion", J Dent Res, 69, pp.36~39 (1990)
  46. Momoi Y, "Hygroscopic expansion of resin based composites during 6 months of water storage", Br Dent J, 5, pp.91~96 (1994)
  47. Calais JG, "Influence of filler type and water exposure on flexural strength of experimental composite resins", J Dent Res, 67, pp.836~840 (1988)
  48. Martin N, "Hygroscopic expansion and solubility of composite restoratives", Dent Mater, 19, pp.77~86 (2003)
  49. Segura A, "In vitro posterior composite polymerization recovery following hygroscopic expansion", J Oral Rehabil, 20, pp.495~499 (1993)
  50. Thonemann BM, "SEM analysis of marginal expansion and gap formation in Class II composite restorations", Dent Mater, 13, pp.192~197 (1997)
  51. Yap AU, "Marginal gap formation of composites in dentine: effect of water storage", J Oral Rehabil, 30, pp.236~242 (2003)
  52. Huang C, "Hygroscopic expansion of a compomer and a composite on artificial gap reduction", J Dent, 30, pp.11~19 (2002)

관련 논문AI추천

열순환이 상아질접착제처리 후 미세누출에 미치는 영향에 관한 연구유승훈대한턱관절교합학회 · 구강회복응용과학지2008 · 제24권 제2호상아질 접착제의 미세누출에 관한 연구김선미, 박지일, 손정민, 양규호, 최남기대한소아치과학회 · 대한소아치과학회지2008 · 제35권 제4호Micro-CT를 이용한 복합 레진 수복물 미세 누출도의 정량 분석김영재, 김정욱, 김종철, 이상익, 이상훈, 장기택, 한세현, 현홍근대한소아치과학회 · 대한소아치과학회지2007 · 제34권 제2호수 종의 복합레진 접착 시스템에서의 미세 누출의 비교김영진, 김현정, 남동우, 남순현, 석충기대한소아치과학회 · 대한소아치과학회지2004 · 제31권 제4호접착제에 따른 유동성 복합 레진 수복물의 미세누출 양상에 관한 연구김종수, 박지은, 유승훈대한소아치과학회 · 대한소아치과학회지2008 · 제35권 제3호복합레진 수복 시 재접착 술식이 미세누출에 미치는 영향서덕규, 손호현, 이미애, 조병훈대한치과보존학회 · Restorative Dentistry and Endodontics2010 · 제35권 제3호

이 간행물의 다른 논문 (13건)

Streptococcus mutans에 대한클로르헥시딘과 Erythrosine 광역동 치료의 상승효과이시영, 박호원, 박종철pp. 241-246S-PRG filler를 함유한 치면열구전색제의 미세누출 및 항우식효과김종수, 신승우pp. 247-252임상술기능력평가와 교과목간의 학업성취도 분석을 통한소아치과학의 교육과정 평가박재홍, 임재영, 방재범pp. 253-259치과용 CBCT를 이용한 상악 정중치의 3차원 분석 및 정중치와정중이개와의 관계분석최남기, 김선미, 강은주pp. 260-267임상적으로 유용한 치과용 Air/water syringe의 소독법김재곤, 신세영, 백병주, 양연미, 김미아pp. 268-273
원문 보기