수직축 풍력터빈을 위한 풍력타워에서의 속도증가에 대한 실험적 연구
Experimental Study on the Augmented Velocity within a Wind Power Tower for the Vertical Axis Wind Turbine
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
An experimental study was conducted to augment the performance of VAWTs (vertical axis wind turbine). To enhancethe wind velocity, a wind power tower was applied. The velocities within the wind power tower was measured in a wind tunnel with atest section is 2 m in height and 2.2 m in width. The experiment was conducted with two different velocities according to Reynoldsnumber, 2.1x105 and 1.7x105, based on the length of the guide wall. The measured velocities within the wind power tower werecompared with those measured without a wind power tower. The wind power tower was rotated so that the effect of the wind directionwas considered. Therefore, the velocities within the wind power tower were measured for various azimuth angles. The pressures weremeasured at the upstream and downstream of the wind power tower. The total pressure loss occurred by installing of the wind powertower was estimated. The inner and outer radii of the guide wall were varied to measure the effect depending on the size of the windpower tower. The measured velocity within the wind power tower showed the periodical variation along the azimuth direction. Basedon the near center location where the variation of the velocity was insignificant, the experimental results showed that the wind velocitywas augmented more than 15% by the wind power tower.
Abstract
An experimental study was conducted to augment the performance of VAWTs (vertical axis wind turbine). To enhancethe wind velocity, a wind power tower was applied. The velocities within the wind power tower was measured in a wind tunnel with atest section is 2 m in height and 2.2 m in width. The experiment was conducted with two different velocities according to Reynoldsnumber, 2.1x105 and 1.7x105, based on the length of the guide wall. The measured velocities within the wind power tower werecompared with those measured without a wind power tower. The wind power tower was rotated so that the effect of the wind directionwas considered. Therefore, the velocities within the wind power tower were measured for various azimuth angles. The pressures weremeasured at the upstream and downstream of the wind power tower. The total pressure loss occurred by installing of the wind powertower was estimated. The inner and outer radii of the guide wall were varied to measure the effect depending on the size of the windpower tower. The measured velocity within the wind power tower showed the periodical variation along the azimuth direction. Basedon the near center location where the variation of the velocity was insignificant, the experimental results showed that the wind velocitywas augmented more than 15% by the wind power tower.
참고문헌 (21)
- Tangler, J. L., "NREL Airfoil Families for HAWTs", Proc. Windpower’95, pp.117~123 (1995)
- Coordinates and Calculations for the FFA-W1-xxx, FFA-W2-xxx and FFA-W3-xxx Series of Airfoils for Horizontal Axis Wind Turbines, "Björk, A.", FFA, ~, pp.FFA TN 1990-15 (1990)
- Design and Verification of the New Risø-A1 Airfoil Family for Wind Turbines, "Fuglsang, P.", AIAA, ~, pp.AIAA-2001-0028 (2001)
- Summary of the Delft University Wind Turbine Dedicated Airfoils, "Timmer, W. A.", ~, pp.AIAA-2003-0352 (2003)
- Hybrid Optimization for Wind Turbine Thick Airfoils, "Grasso, F.", AIAA, ~, pp.AIAA 2012-1354 (2012)
- Schubel, P. J., "Wind Turbine Blade Design", Energies, (5), pp.3425~3449 (2012)
- Colley, G., "Computational Flow Field Analysis of a Vertical Axis Wind Turbine", ICREPQ’11 (2011)
- A Novel Vertical Axis Wind Turbine for Distributed & Utility Deployment, "Park, J.", Ontario Sustainable Energy Association, ~ (2007)
- 김병국, "수직축 풍력터빈 성능개선에 관한 실험적 연구", 한국유체기계학회 논문집, 10(3), pp.17~24 (2007), 한국유체기계학회
- Takao, M., "A Straight-Bladed Vertical Axis Wind Turbine with a Directed Guide Vane Row", J. of Fluid Science and Technology, 3(3), pp.379~386 (2008)
- Isensee, G. M., "Modeling and Analysis of Diffuser Augmented Wind Turbine", International Journal of Energy Science, 2(3), pp.84~88 (2012)
- Phillips, D. G., "Aerodynamic Aalysis and Monitoring of the Vortec 7 Diffuser-Augmented Wind Turbine", EMCh, Transactions, 26(1) (1999)
- D.G. Phillips, "CFD modelling and the development of the diffuser augmented wind turbine", Wind and Structures, An International Journal, 5(2), pp.267~276 (2002), 한국풍공학회
- Nobile, R., "Unsteady Flow Simulation of a Vertical Axis Wind Turbine: a Two-Dimensional Study", EngD Conference (2013)
- Chong, W. T., "Vertical axis Wind Turbine with Omni-Directional-Guide-Vane for Urban High Rise Application", Journal of Central South University of Technology, 19, pp.721~732 (2012)
- Chen, L., "Perspectives on Innovative Concepts in Wind-Power Generation", Energy for Sustainable Development, 15, pp.398~410 (2011)
- Allaei, D., "Invelox:Description of a New Concept in Wind Power and its Performance Evaluation", Energy, 69, pp.336~344 (2014)
- Design of Guided Vane for Improving the Efficiency of a Vertically Layered Wind Turbine Generator, "Baek, Y. M.", Odin Energy, ~, pp.TR-2017 (2017)
- Van Bussell G. J. W., "The Development of Turby, A Small VAWT for the Built Environment", Global Wind Energy Conference 2004, Session Advanced Small Turbine Technology (2004)
- Numerical Analysis in a Prototype Wind Power Tower using CFD, "Cho, S. Y.", ~, pp.KIMM -CR-2015-A0365 (2015)
- 조수용, "풍력타워의 형상이 수직축 풍력터빈의 성능에 미치는 영향에 관한 수치적 연구", 신재생에너지, 11(2), pp.17~28 (2015), 한국신·재생에너지학회[DOI]