하나로 조사시험용 다공 원통형 구조물의 온도해석
Temperature Analysis of the Cylindrical Structure with Multi-Holes of HANARO Irradiation Test
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
재료나 핵연료조사시험에서 다공원통형구조물의 모든 구성품에서 감마열 및 fission과 같은 열원이 발생한다. 본 연구는 조사시험중 다공원통형구조물의 열적건전성을 평가하기 위해 온도분포에 대한 일반해를 구하는데 그 목적이 있다. 다공원통형 구조물의 온도해석을 위해 2차원 열전도 방정식을 이용하였다. 유한요소해석은 ANSYS 6.1을 이용하여 수행하였다. 다공원통형 구조물의 온도해석에서 이론해석결과와 유한요소해석결과는 홀의 개수가 3개 이하에서는 온도가 서로 잘 일치하는 것으로 나타났다. 구조물의 홀 개수가 4개일때, 온도분포해석에 대한 두 결과의 차이가 증가하였다
Abstract
During the irradiation tests of material and fuel rod, all components of the cylindrical structure with multiple holes act like heat sources due to high gamma heat and fission heat. The objective of this study is to formulate the general solution for the temperature distribution to estimate the thermal integrity of structure during irradiation tests. For the temperature distribution analysis, the two-dimensional heat conduction theory is used. The unmerical analysis is performed by the commercial finite element analysis code, ANSYS 6.1. If the cylindrical structure with hole number would not exceed three holes, the analysis results and finite element results are good agreement together.For the structure with four holes, the discrepancy between FE results and analysis results of the structural temperature distribution is increased.
참고문헌 (11)
- "A Structural Analysis of the Circular Cylinder with Multi Holes under Thermal Loading", 212, pp.273~279 (2002)
- "Pressure Vessel Code Section Ⅲ" (1995), Div. 1, Subsection NB
- "Calculated Effect of Radially Asymmetric Heat Generation on Temperature and Heat Flux Distribution in a Fuel Rod", 31, pp.66~71 (1974)
- "Analysis of Effect Eccentric Holes in Pellets on Temperature and Heat Flux Distribution in Fuel Rod", 23(2), pp.1986~
- "Effect of Eccentric Pellet on Gap conductance in Fuel Rod", 28(10), pp.961~964 (1991)
- "Estimation for Temperature Distribution in a HeatGenerating Cylinder with Multiple Hole Journal of Nuclear Science and Technology", 30(4), pp.291~301 (1993)
- "Evaluation of Gap Heat Transfer between Boron Carbide Pellet and Cladding in Control Rod of FBR", 29(2), pp.121~130 (1991)
- "다공원통구조물의 온도 및 열응력해석", pp.1~51 (2002)
- "Generalized Thermoelasticity for an Infinite Body with a Circular Cylindrical Hole JSME International Journal", 33(1), pp.1990~
- "Generalized Thermoelasticity for an Infinite Solid Cylinder JSME International Journal", 34(3), pp.1991~
- "Transient Thermal Stresses on a Finite Disk due to a Continuous Point Heat Source", 92, pp.357~367 (1970)