계면손상과 미세균열을 고려한 입자강화 복합재료의 미세역학 탄성구성모델
A Micromechanics-based Elastic Constitutive Model for Particle-Reinforced Composites Containing Weakened Interfaces and Microcracks
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
본 연구에서는 입자강화 복합재료(particle-reinforced composites)의 거동을 예측하기 위하여 Lee and Pyo(2007)에 의해 제안된 계면손상을 고려한 복합재료의 미세역학 탄성모델과 Karihaloo and Fu(1989)의 미세균열 생성모델을 결합하여, 보강입자의 계면손상(imperfect interface)과 기지 내 미세균열을 고려하여 탄성구성모델(constitutive model)의 거동해석을 수행하였다. 제안된 탄성구성모델의 적용성 검증과 주요손상변수가 거동예측에 미치는 영향을 알아보기 위해 일축 하중 하에서의 응력-변형률 관계를 수치적으로 나타내었다. 또한, 기존의 관련 실험결과와 본 해석결과와의 비교를 통하여 제안된 모델의 정확도를 검증하였다.
Abstract
A constitutive model based on a combination of a micromechanics-based weakened interface elastic model (Lee and Pyo, 2007) and a crack nucleation model (Karihaloo and Fu, 1989) is proposed to predict the effective elastic behavior of particle-reinforced composites. The model specifically considers imperfect interfaces in particles and microcracks in the matrix. To exercise the proposed constitutive model and to investigate the influence of model parameters on the behavior of the composites, numerical simulations on uniaxial tension tests were conducted. Furthermore, the present prediction is compared with available experimental data in the literature to verify the accuracy of the proposed constitutive model.
참고문헌 (15)
- 김동섭, "복합재료의 기술동향" (1996), 농업기술정보원 보고서
- 김태우, "세라믹", 금속기지 복합재료의 특성예측을 위한 미시역학적 유한요소해석, 2001, pp.38(6), 575~581
- 진민철, "계면이 분리된 복합재료의 기계적 성질 연구", 울산대학교 공학연구논문집, 33(1), pp.51~67 (2002)
- 장병국, "Microcracking에 의한 복합재료의 고인성화 특성", 한국재료학회지, 9(2), pp.132~138 (1999)
- Caiazzo, A. A., "On the constitutive relations of materials with evolving microstructure due to microcracking", Journal of Reinforced Plastics and Composites, 19(2), pp.152~163 (2000)
- Carman, G. P., "Micromechanics of short-fiber composites", Composites Science and Technology, 43(2), pp.137~146 (1992)
- Cho, J., "Effect of inclusion size on mechanical properties of polymeric composites with microand nano particles", Composites Science and Technology, 66, pp.1941~1952 (2006)
- Ju, J. W., "Micromechanics and effective elastoplastic behavior of two-phase metal matrix composites", Journal of Engineering Materials and Technology, 116, pp.310~318 (1994)
- Karihaloo, B. L., "A damage-based constitutive law for plain concrete in tension", European Journal of Mechanics, 8, pp.373~384 (1989), A-Solids
- Lamon, J., "A micromechanics-based approach to the mechanical behavior of brittle-matrix composites", Composites Science and Technology, 61(15), pp.2259~2272 (2001)
- Lee, H. K., "Micromechanics-based elastic damage modeling of particulate composites with weakened interfaces", International Journal of Solids and Structures, 44, pp.8390~8406 (2007)
- Shen, Y. L., "Correlation between tensile and indentation behavior of particle-reinforced metal matrix composites: an experimental and numerical study", Acta Materialia, 49, pp.3219~3229 (2001)
- Sun, L. Z., "Elastoplastic modeling of metal matrix composites containing randomly located and oriented spheroidal particles", Journal of Applied Mechanics, 71, pp.774~785 (2004), Transactions of ASME
- Weibull, W., "A statistical distribution function of wide applicability", Journal of Applied Mechanics, 18, pp.293~297 (1951)
- Zhou, C. W., "Mesofracture of metal matrix composites reinforced by particles of large volume fraction", Theoretical and Applied Fracture Mechanics, 41, pp.311~326 (2004)