Analysis for Torsion of Hollow Beam by Least Squares andBoundary Elements Method
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper we are concerned with the performance of structural stability of torsion in square cross section of a beam with holes. The critical load is defined as the smallest load at which the equilibrium of the structure fails to be stable as the load is slowly increased from zero. The beams subjected to torsion are frequently encountered in general structures and these forces influence to the stability of structure. The boundary element method is found to be very efficient and accurate for the analysis of torsion problems including complex boundary conditions with respect to its simplicity and generality. In this paper, it is required to derive the boundary element formulation for torsion problem and integrate directly on the discrete boundary. To investigate the validity of the developed computer program, three distinctly solid cross-sections which are elliptical, rectangular and triangular one are analyzed, and comparisons are made with analytical approaches where these can also be used.
Abstract
In this paper we are concerned with the performance of structural stability of torsion in square cross section of a beam with holes. The critical load is defined as the smallest load at which the equilibrium of the structure fails to be stable as the load is slowly increased from zero. The beams subjected to torsion are frequently encountered in general structures and these forces influence to the stability of structure. The boundary element method is found to be very efficient and accurate for the analysis of torsion problems including complex boundary conditions with respect to its simplicity and generality. In this paper, it is required to derive the boundary element formulation for torsion problem and integrate directly on the discrete boundary. To investigate the validity of the developed computer program, three distinctly solid cross-sections which are elliptical, rectangular and triangular one are analyzed, and comparisons are made with analytical approaches where these can also be used.
참고문헌 (19)
- Boresi, A., "Advanced Mechainics of Materials", pp.210~252 (1978), John Wiley and Sons
- Chen, J.T., "Dual Boundary Element Analysis using Complex Variables for Potential Problems with or Without Degenerate Boundary", Engineering Analysis with Boundary Elements, 24, pp.671~684 (2000)
- Chou, S.I., "Complex Variable Boundary Element Method for Torsion of Hollow Shafts", Nuclear Engineering and Design, 136, pp.255~263 (1992)
- Dorao, C.A, "Least-squares Spectral Method for Solving Advective Population Balance Problems", Journal of Computational and Applied Mathematics, 201, pp.247~257 (2007)
- Dumir, P.C., "Complex Variable Boundary Element Method for Torsion of Anisotropic Bars", Applied Mathematical Modelling, 17, pp.80~88 (1993)
- Friedman, Z, "Torsion and Flexure of a Prismatic Isotropic Beam using the Boundary Element Method", Computers & Structures, 74, pp.479~494 (2000)
- Gaspari, D., "Torsion and Flexure of Orthotropic Beams by a Boundary Element Model", Engineering Analysis with Boundary Elements, 29, pp.850~858 (2005)
- Kim, S.D., "Adjoint Pseudospectral Least-Squares Methods for an Elliptic Boundary Value Problems", Applied Numerical Mathematics, 59, pp.334~348 (2009)
- Mokos, V.G., "Secondary Torsional Moment Deformation Effect by BEM", International Journal of Mechanical Sciences, 53, pp.897~909 (2011)
- Sapountzakis, E.J., "3-D Beam Element of Composite Cross Section Including Warping and Shear Deformation Effect", Computers & Structures, 85, pp.102~116 (2007)
- Sapountzakis, E.J, "Nonuniform Torsion of Multi-Material Composite Bars by the Boundary Element Method", Computers & Structures, 79, pp.2805~2816 (2001)
- Sapountzakis, E.J., "Warping Stresses in Nonuniform Torsion of Composite Bars by BEM", Computer Methods in Applied Mechanics and Engineering, 192, pp.4337~4353 (2003)
- Sapountzakis, E.J., "Solution of Non-Uniform Torsion of Bars by an Integral Equation Method", Computers & Structures, 77, pp.659~667 (2000)
- Sapountzakis, E.J., "Nonuniform Torsion of Composite Bars of Variable Thickness by BEM", International Journal of Solids and Structures, 41, pp.1753~1771 (2004)
- Sapountzakis, E.J., "Nonlinear Inelastic Uniform Torsion of Composite Bars by BEM", Computers & Structures, 87, pp.151~166 (2009)
- Saint Venant, B., "De la Torsion des Prismes" (1885), Imprimerie periale
- Tan, E.L., "Nonlinear Analysis of Composite Beams Subjected to Combined Flexure and Torsion", Journal of Constructional Steel Research, 67, pp.790~799 (2011)
- Xu Rongqiao, "Saint-Venant Torsion of Orthotropic Barswith Inhomogeneous Rectangular Cross Section", Composite Structures, 92, pp.1449~1457 (2010)
- Zitnan, P, "Discrete Weighted Least-Squares Method for the Poisson and Biharmonic Problems on Domain Smooth Boundary", Applied Mathematics and Computation, 217, pp.8973~8982 (2011)