FBG 센서를 이용한 강연선 전달길이 측정
Measurement of Transfer Length for a Seven-Wire Strandwith FBG Sensors
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
본 논문에서는 프리텐션된 고강도 콘크리트 부재에서의 전달길이를 측정하기 위해 FBG 센서가 기입된 스마트 강연선을 활용하여 실험을 수행하였다. 전달길이 측정을 위해 길이 3m, 단면 150×150mm의 고강도 콘크리트 시험체를 총 5개 제작하였으며, 프리텐션 도입 시 콘크리트 압축강도는 58MPa로 측정되었다. 실험 결과 콘크리트 표면에 부착하는 기존의 전기 저항식 게이지보다 FBG 센서로부터 보다 정밀하고 신뢰성있는 강연선의 전달길이를 계측할 수 있는 것으로 나타났다. 계측 결과로부터 산정된 강연선 전달길이를 기존의 여러 모델들과 비교하였으며, 이를 통해 고강도 콘크리트 부재에서의 전달길이 산정에 대한 기존 모델들의 적용성을 분석하였다. 본 연구 내용은 향후 강연선의 부착 특성 분석 등의 관련 분야 연구 등에 유용할 것으로 기대된다.
Abstract
In this paper, an experimental program has been conducted to investigate transfer length in high strength concrete members pretensioned through a seven-wire strand with FBG sensors. To measure transfer length, five members were fabricated, which had a length of 3 m and a cross-section of 150×150mm. It was measured that the concrete compressive strength was 58MPa at pretensioning. Test results indicated that more precise and reliable measurement on the transfer length was attained with FBG sensors than conventional gauges attached on concrete surface. Through comparing the measured transfer length and predictions, applicability of several transfer length models in literature was investigated. This paper can be useful for relevant research field such as investigation on the bond mechanism of a seven-wire strand in concrete members.
참고문헌 (17)
- Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary, , American Concrete Institute, ~, pp.ACI 318-11 (2011)
- Balázs, G.L., "Transfer Control of Prestressing Strands", PCI J., 37, pp.60~71 (1992)
- Barnes, R. W., "Experimental Assessment of Factors Affecting Transfer Length", ACI Struct. J., 100, pp.740~748 (2006)
- 김재민, "광섬유센서가 내장된 강연선을 이용한 교량의 장력 모니터링 방법", 한국전산구조공학회논문집, 21(3), pp.287~294 (2008), 한국전산구조공학회
- Kim, J. M., "Tension Monitoring of a Prestressing Strand for Concrete Bridge using In-Tendon FBG Sensors", Proc. IABMAS-2010, pp.205~210 (2010)
- Kim, J. M., "FBG Sensors Encapsulated into 7-Wire Steel Strand for Tension Monitoring of a Prestressing Tendon", Adv. Struct. Eng., 15(6), pp.907~918 (2012)
- Lau, K.T., "Fibre-Optic Sensors and Smart Composites for Concrete Applications", Mag. Concr. Res., 55(1), pp.19~34 (2003)
- The Revision of Structural Concrete Design Code, "Ministry of Land, Transport and Maritime Affairs", 342~ (2012)
- Mitchell, D., "Influence of High Strength Concrete on Transfer and Development Length of Prestressing Strand", PCI J., 38, pp.52~66 (1993)
- Oh, B. H., "Realistic Evaluation of Transfer Lengths in Pretensioned, Prestressed Concrete Members", ACI Struct. J., 97, pp.821~830 (2000)
- Park, H., "Bond-Slip-Strain Relationship in Transfer Zone of Pretensioned Concrete Elements", ACI Struct. J., 111, pp.503~513 (2014)
- Park, H., "Methodological Aspects in the Measurement of Strand Transfer Length in Pretensioned Concrete", ACI Struct. J., 109, pp.625~634 (2012)
- Ren, L., "Development of Tube-Packaged FBG Strain Sensor and Application in the Vibration Experiment of Submarine Pipeline Model", SPIE Proc., pp.98~103 (2005)
- Design Guidelines for Transfer, Development and Debonding of Large Diameter Seven Wire Strands in Pretensioned Concrete Gierders, "Russell, B.W.", Cener for Transportation Research, the University of Texas at Austin, ~, pp.FHWA (1993), TX-93+1210-5F
- Russell, B. W., "Measurement of Transfer Lengths on Pretensioned Concrete Elements", J. Struct. Eng., 123, pp.541~549 (1997), ASCE
- Udd, E., "Fiber Optic Smart Structures" (1996), John Wiley and Sons, Inc
- Zia, P., "Development Length of Prestressing Strands", PCI J., 22, pp.54~65 (1977)