Development of EM Wave Absorber for Hi-pass System Using Amorphous Metal Powder
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, we designed and fabricated the Electromagnetic(EM) wave absorber for an Electronic Toll Collection(ETC or Hi-pass) system by using Amorphous metal powder and CPE. The material properties and the absorption properties of the samples containing 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% of Amorphous. Moreover, the EM wave absorption abilities were simulated for the different thicknesses of the EM absorbers by adopting the measured permittivity and permeability, and then the EM wave absorber was fabricated based on the simulated design values. As a result, the EM wave absorber with the composition of Amorphous metal powder : CPE = 50 : 50 wt.% with the thickness of 2.6 mm has excellent absorption ability more than 40 dB at 5.8 GHz.
Abstract
In this paper, we designed and fabricated the Electromagnetic(EM) wave absorber for an Electronic Toll Collection(ETC or Hi-pass) system by using Amorphous metal powder and CPE. The material properties and the absorption properties of the samples containing 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% of Amorphous. Moreover, the EM wave absorption abilities were simulated for the different thicknesses of the EM absorbers by adopting the measured permittivity and permeability, and then the EM wave absorber was fabricated based on the simulated design values. As a result, the EM wave absorber with the composition of Amorphous metal powder : CPE = 50 : 50 wt.% with the thickness of 2.6 mm has excellent absorption ability more than 40 dB at 5.8 GHz.
참고문헌 (10)
- Dong-HanChoi, "Dependence of Electromagnetic Wave Absorption Properties on Binders", Journal of the Korean Physical Society, 42(6), pp.799~802 (2003), 한국물리학회
- Choi, C. M., "Development of the Electromagnetic Wave Absorber for 94 GHz Radar Sensors Using Permalloy", Inter.J.KIMICS, 4(3), pp.114~117 (2006)
- David M.Pozer, "Microwave Engineering" (2005), J. Wiley & Sons
- Haneda K., "Experimental Determination of Propagation Paths for the ETC System - Equipment Development and Field Test", Trans. IEICE, E87-A(11), pp.3008~3015 (2004)
- Hashimoto O, "Introduction to Wave Absorber" (1997), Morikita Shuppan
- Kim,D.I., "Michiharu Takahashi,Hiroki Anzai,and Sang Yup Jun", IEEE Trans.Electromag.Compat, 38, pp.173~ (1996)
- Kim, D. H., , Internat. J. Navig. Port Res, 30, pp.161~ (2006)
- Dong Il Kim, "Dependence of Preparation Temperature on Microwave Absorption Properties in Absorbers for Mobile Phones", Journal of the Korean Physical Society, 43(2), pp.269~272 (2003), 한국물리학회
- Naito Y, "Electromagnetic Wave Absorbers. Chap. 2", pp.73~ (1987), New Ohm, Tokyo
- Soh T., , Trans. IEICE J84-B (2001)