본문 바로가기
KERD
논문KCI 등재

상태 기반 페리다이나믹 모델에 의한 동적취성파괴 해석: 평면응력 탄성체의 응력 전파와 균열패턴 분석

Dynamic Fracture Analysis with State-based Peridynamic Model: Crack Patterns on Stress Waves for Plane Stress Elastic Solid

0

조회

0

다운로드

2

인용

0

참고문헌

키워드

초록

상태 기반 페리다이나믹 모델은 일반적인 재료 구성 모델을 구현할 수 있고 비국부 영역 내에서 연결된 모든 결합의 변형을 통해 각 절점의 재료 응답이 결정되기 때문에 체적 및 전단 변형을 모두 표현할 수 있다. 따라서 상태 기반 모델은 복잡한 동적 취성 파괴 현상(분기균열, 2차 균열, 계단균열, 균열 유착 등)을 해석하는데 유용하다. 본 논문에서는 평면응력 탄성체에 대해 2차원 상태 기반 페리다이나믹 모델을 적용하고 에너지해방율과 페리다이나믹 에너지 포텐셜로부터 손상 모델을 구성하였다. 페리다이나믹 파괴 해석 모델을 통해 취성 유리 재료에 대해 균열 면에 평행한 압축 응력파가 균열 분기 패턴에 미치는 영향에 대해 조사하였다. 실험을 통해 관찰된 동적 균열 진전 및 분기 패턴에 대한 주요 특성들이 페리다이나믹 해석을 통해 확인되었다. 또한 강한 인장 하중 하의 계단균열과 이차균열 등이 상태 기반 페리다이나믹 시뮬레이션을 통해 잘 모사가 되는 것을 확인할 수 있었다.

Abstract

A state-based peridynamic model is able to describe a general constitutive model from the standard continuum theory. The response of a material at a point is dependent on the deformation of all bonds connected to the point within the nonlocal horizon region. Therefore, the state-based peridynamic model permits both the volume and shear changes of the material which is promising to reproduce the complicated dynamic brittle fracture phenomena, such as crack branching, secondary cracks, cascade cracks, crack coalescence, etc. In this paper, the two-dimensional state-based peridynamic model for a linear elastic plane stress solid is employed. The damage model incorporates the energy release rate and the peridynamic energy potential. For brittle glass materials, the impact of the crack-parallel compressive stress waves on the crack branching pattern is investigated. The peridynamic solution for this problem captures the main features, observed experimentally, of dynamic crack propagation and branching. Cascade cracks under strong tensile loading and secondary cracks are also well reproduced with the state-based peridynamic simulations.

참고문헌 (14)

  1. Bobaru, F., "Damage Progression from Impact in Multilayered Glass Modeled with Peridynamics", Central European J. Eng., 2(4), pp.551~561 (2012)
  2. Bowden, F.P., "Controlled Fracture of Brittle Solids and Interruption of Electrical Current", Nature, 216, pp.38~42 (1967)
  3. Döll, W., "Investigations of the Crack Branching Energy", Int. J. Fract., 11, pp.184~186 (1975)
  4. Ha, Y.D., "Studies of Dynamic Crack Propagation and Crack Branching with Peridynamics", Int. J. Fract., 162(1-2), pp.229~244 (2010)
  5. Ha, Y.D., "Characteristics of Dynamic Brittle Fracture Captured with Peridynamics", Eng. Fract. Mech., 78(6), pp.1156~1168 (2011)
  6. 하윤도, "페리다이나믹스 해석법을 통한 동적취성 파괴거동해석:분기 균열각도와 균열 전파속도", 한국전산구조공학회논문집, 24(6), pp.637~644 (2011), 한국전산구조공학회
  7. 하윤도, "섬유강화 복합재의 동적 취성 파괴현상 규명을 위한 비국부 페리다이나믹스 해석법 개발: 비대칭 하중 연구", 한국전산구조공학회논문집, 25(4), pp.279~286 (2012), 한국전산구조공학회[DOI]
  8. Ha, Y.D., "Fracturing Patterns of Rock-like Materials in Compression Captured with Peridynamics", Eng. Fract. Mech. (2014)
  9. 하윤도, "평면응력 문제의 상태 기반 페리다이나믹 동적파괴 해석 모델링", 한국전산구조공학회논문집, 28(3), pp.301~308 (2015), 한국전산구조공학회[DOI]
  10. Hu, W., "Modeling Dynamic Fracture and Damage in Fiber-Reinforced Composites with Peridynamics", Int. J. Multiscale Comput. Eng., 9(6), pp.707~726 (2011)
  11. Hu, W., "Peridynamic Model for Dynamic Fracture in Unidirectional Fiber-Reinforced Composites", Comput. Methods Appl. Mech.& Eng., 217, pp.247~261 (2012)
  12. Le, Q.V., "A Two-Dimensional Ordinary, State-based Peridynamic Model for Linarly Elastic Solids", Int. J. Numer. Methods Eng., 98, pp.547~561 (2014)
  13. Ravi-Chandar, "An Experimental Investigation into Dynamic Fracture:IV. On the Interaction of Stress Waves with Propagating Cracks", Int. J. Fract., 26, pp.189~200 (1944)
  14. Silling, S.A., "Reformulation of Elasticity Theory for Discontinuities and Long-Range Forces", J. Mech.& Phys. Solids, 48, pp.175~209 (2000)

관련 논문AI추천

이 간행물의 다른 논문 (11건)