예혼합 연소기에서 화염 전달 함수 측정
Flame transfer function measurement in a premixed combustor
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
An experimental study of the flame response in a turbulent premixed combustor has been conducted with room temperature, atmospheric pressure inlet conditions using premixed natural gas. The fuel is premixed with the air upstream of a choked inlet to avoid equivalence ratio fluctuations. Therefore the observed flame response is only the result of the imposed velocity fluctuations, which are produced using a variable speed siren. Measurements are made of the velocity fluctuation in the nozzle using hot wire anemometry and of the heat release fluctuation in the combustor using chemiluminescence emission. The results are analyzed to determine the phase and gain of the flame transfer function as a function of the modulation frequency. Of particular interest is the effect of flame structure on the flame response predictions and measurements. The results show that both the gain and the phase of flame transfer function are closely associated with the flame length and structure, which is dependent upon the upstream flow perturbation as well as equivalence ratio in the current study.
Abstract
An experimental study of the flame response in a turbulent premixed combustor has been conducted with room temperature, atmospheric pressure inlet conditions using premixed natural gas. The fuel is premixed with the air upstream of a choked inlet to avoid equivalence ratio fluctuations. Therefore the observed flame response is only the result of the imposed velocity fluctuations, which are produced using a variable speed siren. Measurements are made of the velocity fluctuation in the nozzle using hot wire anemometry and of the heat release fluctuation in the combustor using chemiluminescence emission. The results are analyzed to determine the phase and gain of the flame transfer function as a function of the modulation frequency. Of particular interest is the effect of flame structure on the flame response predictions and measurements. The results show that both the gain and the phase of flame transfer function are closely associated with the flame length and structure, which is dependent upon the upstream flow perturbation as well as equivalence ratio in the current study.
참고문헌 (8)
- Krebs, W., "Thermoacoustic stability chart for high-intensity gas turbine combustion systems", Combution Science and Technology, 174(7), pp.99~128 (2002)
- Ducruix, S., "Combustion dynamics and instabilities: elementary coupling and driving mechanisms", Journal of Propulsion and Power, 19(5), pp.722~734 (2003)
- Lieuwen, T., "Modeling premixed combustion- acoustic wave interactions: a review", Journal of Propulsion and Power, 19(5), pp.765~781 (2003)
- Santosh, H., "Kinematic coupling effects on heat-release transfer function of a premixed flame", Journal of Propulsion and Power, 21(4), pp.591~599 (2005)
- Birbaud, A. L., "Dynamics of confined premixed flames submitted to upstream acoustic modulations", Proceedings of the Combustion Institute, 3, pp.1257~1265 (2007)
- Dasch, C. J., "One-dimensional tomography: a comparison of Abel, onion-peeling, and filtered backprojection methods", Applied Optics, 3(8), pp.1146~1152 (1992)
- Balachandran, R., "Experimental investigation of the nonlinear response of turbulent premixed flames to imposed inlet velocity oscillations", Combustion and Flame, 143, pp.37~55 (2005)
- Bellows, B. D., "Nonlinear flame transfer function characteristics in a swirl-stabilized combustor", Journal of Engineering for Gas Turbines and Power, 129(4), pp.954~961 (2007)