CH4/CHF3/Air 예혼합 화염의 축소 반응 메카니즘 개발
The Development of a Short Reaction Mechanism for Premixed CH4/CHF3/Air Flames
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A short reaction mechanism for premixed CH4/CHF3/Air flames was developed with a reduction method of the combined application of simulation error minimization (SEM) which included connectivity method and principal component analysis. It consisted of 43 species and 403 elementary reactions at the condition of less than 5% of maximum error. The calculation time operated with a short mechanism was over 5 times faster than one with a detailed reaction mechanism. Good agreement was found between the flame speeds calculated by the short reaction mechanism and those by the detailed reaction mechanism for the entire range of CHF3/CH4 mole ratios and equivalence ratios. In addition excellent agreements were determined for the profiles of temperature, species concentration, and the production rates of the various species. So the short reaction mechanism was able to accurately predict the flame structure for premixed CH4/CHF3/Air flames.
Abstract
A short reaction mechanism for premixed CH4/CHF3/Air flames was developed with a reduction method of the combined application of simulation error minimization (SEM) which included connectivity method and principal component analysis. It consisted of 43 species and 403 elementary reactions at the condition of less than 5% of maximum error. The calculation time operated with a short mechanism was over 5 times faster than one with a detailed reaction mechanism. Good agreement was found between the flame speeds calculated by the short reaction mechanism and those by the detailed reaction mechanism for the entire range of CHF3/CH4 mole ratios and equivalence ratios. In addition excellent agreements were determined for the profiles of temperature, species concentration, and the production rates of the various species. So the short reaction mechanism was able to accurately predict the flame structure for premixed CH4/CHF3/Air flames.
참고문헌 (16)
- Andraea JCG, "HCCI experiments with toluene reference fuels modeled by a semidetailed chemical kinetic model", Combustion and Flame, 155, pp.696~712 (2008)
- J. Pragera, "Skeletal mechanism generation with CSP and validation for premixed n-heptane flames", Proceedings of the Combustion Institute, 32, pp.509~517 (2009)
- Wanga Q, "Skeletal mechanism generation for high-temperature oxidation of kerosene surrogate", Combustion and Flame, 159, pp.91~102 (2012)
- Burgress Jr DR, "Thermochemical and chemical kinetic data for fluorinated hydrocarbons", Prog. Energy Combust. Sci., 21, pp.453~529 (1996)
- Linteris GT, "Inhibition of premixed methane-air flames by fluoromethanes", Combustion and Flame, 105, pp.15~27 (1996)
- Linteris G, "Burning velocity of 1, 1-diflurorethane (R-152a)", ASHRAE Transactions, 112, pp.448~458 (2006)
- "CHEMKIN-CFD"[URL]
- Nagy T, "Reduction of Very Large Reaction Mechanisms Using Methods Based on Simulation Error Minimization", Combustion and Flame, 156, pp.417~428 (2009)
- Zsély IGy, "Reduction of a Detailed Kinetic Model for the Igniton of Methane", Propane Mixtures at Gas Turbine Conditions Using Simulation Error Minimization Methods, 2011, pp.158, 1469~1479
- Nagy T, "Reduction of a Detailed Kinetic Model for the Igniton of Methane", Ethane, Proceedings of the European Combustion Meeting 2011, pp.2011[DOI]
- Lean flammability as a fundamental refrigerant property, "Grosshandler W", ~, pp.NISTIR 6229 (1998)
- Smooke, M., "Formulation of the Premixed and Nonpremixed Test Problems" (1991), Springer-Verlag
- Saso Y, "Laminar burning velocities of trifluoromethanemethane mixtures: experiment and numeical simulation", Combustion and Flame, 114, pp.457~468 (1998)
- Glassman I, "Conbustion, 4th Ed" (2000), Elsevier
- 이기용, "메탄-불소계 화합물의 예혼합화염 구조에서 산소 부화의 효과", 대한기계학회논문집 B, 35(8), pp.839~845 (2011), 대한기계학회